No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
vrrpOperTable

vrrpOperTable

This table is for VRRP operation on devices. It lists a series of VRRP operation entries. From this table, you can view the current VRRP configuration on the device. In addition, you can create instances of virtual routers and modify the configuration.

The index of this table is ifIndex.vrrpOperVrId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.68.1.3.1.1

vrrpOperVrId

VrId

Not-accessible

This object contains the Virtual Router Identifier (VRID).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.2

vrrpOperVirtualMacAddr

MacAddress

Read-only

The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.3

vrrpOperState

INTEGER{initialize(1),backup(2),master(3)}

Read-only

The current state of the virtual router. This object has four defined values:
  • initialize(1): Initialize state. In this state, a device does not process VRRP Advertisement packets.
  • backup(2): Backup state. In this state, a device receives VRRP Advertisement packets from the master device and determines whether the master device is working properly.
  • master(3): Master state. In this state, a device periodically sends VRRP Advertisement packets and forwards IP packets sent to the virtual MAC address.

Setting the "vrrpOperAdminState" object (below) initiates transitions in the value of this object.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.4

vrrpOperAdminState

INTEGER {up(1),down(2)}

Read-create

This object can enable/disable the virtual router function. The values are as follows:

  • 1: setting the value to "up", will transition the state of the virtual router from "initialize" to "backup" or "master", depending on the value of "vrrpOperPriority"
  • 2: setting the value to "down", will transition the device from "master" or "backup" to 'initialize'. State transitions may not be immediate; they sometimes depend on other factors, such as the interface (IF) state

By default, the value is 2.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.5

vrrpOperPriority

Integer32 (0..255)

Read-create

This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority.

A priority of "0", although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master.

A priority of 255 is used for the device that owns the associated IP address(es).

By default, the value is 100.

The value that can be set manually ranges from 1 to 254.

1.3.6.1.2.1.68.1.3.1.6

vrrpOperIpAddrCount

Integer32 (0..255)

Read-only

The value of this object identifies the number of IP addresses that are associated with this virtual router.

This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.7

vrrpOperMasterIpAddr

IpAddress

Read-only

This object indicates the master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.8

vrrpOperPrimaryIpAddr

IpAddress

Read-create

In the case where there is more than one IP address for a given "ifIndex", this object is used to specify the IP address that will become the "vrrpOperMasterIpAddr", should the virtual router transition from backup to master.

If this object is set to 0.0.0.0, the IP address which is numerically lowest will be selected.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.9

vrrpOperAuthType

INTEGER {noAuthentication(1),simpleTextPassword(2),ipAuthenticationHeader(3)}

Read-create

The value of this object identifies authentication type used for VRRP protocol exchanges between virtual routers.

This value of this object is the same for a given ifIndex.

By default, the value is 1.

he values that can be set manually are as follows:
  • 1: noAuthentication
  • 2: simpleTextPassword
  • 3: MD5

1.3.6.1.2.1.68.1.3.1.10

vrrpOperAuthKey

OCTET STRING (SIZE (0..16))

Read-create

This object indicates the authentication key.

This object is set according to the value of the "vrrpOperAuthType" object ("simpleTextPassword" or "ipAuthenticationHeader").

If the length of the value is less than 16 octets, the agent will left adjust and zero fill to 16 octets.

The value is a string of 1 to 8 characters.

1.3.6.1.2.1.68.1.3.1.11

vrrpOperAdvertisementInterval

Integer32 (1...255)

Read-create

The value of this object identifies the time interval, in seconds, between sending advertisement messages.

Only the master router sends VRRP advertisements.

The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.12

vrrpOperPreemptMode

TruthValue

Read-create

The value of this object controls whether a higher priority virtual router will preempt a lower priority master.

The values are as follows:

  • true
  • false

By default, the value is true.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.13

vrrpOperVirtualRouterUpTime

TimeStamp

Read-only

This is the value of the "sysUpTime" object when this virtual router's status (that is, the "vrrpOperState") transitioned out of "initialized".

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.14

vrrpOperProtocol

INTEGER {ip (1),bridge (2),decnet (3),other (4)}

Read-create

The value of this object identifies the particular protocol being controlled by this virtual router.

The values are as follows:

  • 1: ip
  • 2: bridge
  • 3: decnet
  • 4: other

By default, the value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.68.1.3.1.15

vrrpOperRowStatus

RowStatus

Read-create

The object indicates the status of the row.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • You can create a row in createAndGo and createAndWait modes. After the successful creation, traverse the vrrpOperRowStatus and you can find the value of the created row is notReady.

  • The objects in this table take effect only after a virtual IP address is configured for a VRRP backup group. If no virtual IP address is configured, the generated configuration cannot be restored.

Modification Restriction

When vrrpOperRowStatus is active, only the value of vrrpOperAdminStateObject can be modified. The modification of vrrpOperAdminStateObject affects that of vrrpOperStateObject. If you want to modify the value of ObjectvrrpOperRowStatus from Active to another value, you need to set vrrpOperAdminStateObject to Down.

Deletion Restriction

The entries in this table can be deleted.

You can set the value of ObjectvrrpOperRowStatus and set the corresponding instance as destroy.

Access Restriction

None.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 759107

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next