No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwErpsPortConfigTable

hwErpsPortConfigTable

This table describes how to add ports to ERPS rings.

The indexes of this table are hwConfigRingId, hwConfigPortType, hwConfigPortId1, hwConfigPortId2, hwConfigPortId3, and hwConfigPortId4.

OID

Object Name

Syntax

Max Access

Description

Implementation Specification

1.3.6.1.4.1.2011.5.25.256.1.4.1.1

hwConfigPortType

Unsigned32 (1)

Not-accessible

The value of this object identifies the port type.

Currently, only Ethernet ports can be added to ERPS rings. The value of this object is 1.

1.3.6.1.4.1.2011.5.25.256.1.4.1.2

hwConfigPortId1

Unsigned32(0..2147483647)

Not-accessible

The value of this object identifies the port ID field 1.

If the value of hwConfigPortType [1] is 1, this value is the IfIndex of a port.

1.3.6.1.4.1.2011.5.25.256.1.4.1.3

hwConfigPortId2

Unsigned32(0..2147483647)

Not-accessible

The value of this object identifies the port ID field 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.4.1.4

hwConfigPortId3

Unsigned32(0..2147483647)

Not-accessible

The value of this object identifies the port ID field 3.

Currently, this object is not used, and is used for extensions. The value of this object is 0.

1.3.6.1.4.1.2011.5.25.256.1.4.1.5

hwConfigPortId4

Unsigned32(0..2147483647)

Not-accessible

The value of this object identifies the port ID field 4.

Currently, this object is not used and is used for extensions. The value of this object is 0.

1.3.6.1.4.1.2011.5.25.256.1.4.1.6

hwConfigPortRowStatus

RowStatus

Read-create

The object indicates that a port has been added to an ERPS ring
  • CreateAndGo: adds ports to ERPS rings.
  • Destroy: deletes ports that have been added to ERPS rings.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.4.1.7

hwConfigPortConfigRole

Integer32

Read-create

The value of this object identifies the role of a configured port:
  • 0x10: indicates ordinary ports.
  • 0x21: indicates the RPL owner port.
  • 0x22: indicates the RPL neighbor port.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.4.1.8

hwConfigPortProtectionSwitch

INTEGER

{

forcedSwitch(1),

manualSwitch(2),

idle(65535)

}

Read-create

The value of this object identifies the manual port blocking mode.

If neither FS nor MS is configured, the value is idle(65535).

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No other ring network protocols are configured on the port, and the port must be a Layer 2 port.

Modification Restriction

The new value is valid.

Deletion Restriction

The port to which a specified index corresponds and an ERPS ring must exist.

Access Restriction

ERPS rings have been created, and ports have been added to the ERPS rings.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 734889

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next