No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM-STD-MIB

PIM-STD-MIB

Function Overview

PIM-STD-MIB is used to implement PIM function.

Root directory:

iso(1).rog(3).dod(6).internet(1).mgmt(2).mib-2(1).pimStdMib(157)

Relationships Between Tables

Figure 167-1  Relationship between the PIM interface table, neighbor table, and secondary IP address table

Figure 167-1 shows the relationship between pimInterfaceTable, pimNeighborTable and pimNbrSecAddressTable.

Because one PIM interface may have multiple PIM neighbors, indexes of pimInterfaceTable and pimNeighborTable should be the same. You can obtain all the neighbors of a PIM interface through pimInterfaceIfIndex.

One neighbor may have multiple secondary IP addresses because pimNeighborTable and pimNbrSecAddressTable have same pimNeighborIfIndex, pimNeighborAddressType, and pimNeighborAddress indexes. Through the three indexes, you can obtain all the secondary IP addresses of a neighbor.

Description of Single Objects

pimkeepalivePeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.14

pimKeepalivePeriod

Unsigned32

Read-write

This object indicates the lifetime of an (S, G) entry.

The value ranges from 0 to 65535.

The default value is 210.

Currently, the value ranges from 60 to 65535.

pimRegisterSuppressionTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.15

pimRegisterSuppressionTime

Unsigned32

Read-write

This object indicates the timeout period during which a designated router (DR) remains in the register-suppression state. Within the timeout period, the DR does not send Register messages after receiving the Register-Stop message.

The value ranges from 0 to 65535.

The default value is 60.

Currently, the value ranges from 11 to 3600.

pimStarGEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.16

pimStarGEntries

Gauge32

Read-only

This object indicates the total number of (*, G) entries.

This object is implemented as defined in the corresponding MIB file.

pimStarGIEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.17

pimStarGIEntries

Gauge32

Read-only

This object indicates the total number of entries in pimStarGITable.

This object is implemented as defined in the corresponding MIB file.

pimSGEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.18

pimSGEntries

Gauge32

Read-only

This object indicates the total number of (S, G) entries, including PIM-SM and PIM-SSM.

This object is implemented as defined in the corresponding MIB file.

pimSGIEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.19

pimSGIEntries

Gauge32

Read-only

This object indicates the total number of entries in pimSGITable.

This object is implemented as defined in the corresponding MIB file.

pimSGRptEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.20

pimSGRptEntries

Gauge32

Read-only

This object indicates the total number of (S, G, RPT) entries. The value should be consistent with the total number of PIM-SM (S, G) entries.

This object is implemented as defined in the corresponding MIB file.

pimSGRptIEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.21

pimSGRptIEntries

Gauge32

Read-only

This object indicates the total number of interfaces whose (S, G, RPT) entries' Join or Prune status is not NoInfo.

pimSGRptILocalMembership is not included.

pimOutAsserts

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.22

pimOutAsserts

Counter64

Read-only

This object indicates the total number of the sent Assert messages.

This object is implemented as defined in the corresponding MIB file.

pimInAsserts

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.23

pimInAsserts

Counter64

Read-only

This object indicates the total number of the received Assert messages.

This object is implemented as defined in the corresponding MIB file.

pimLastAssertInterface

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.24

pimLastAssertInterface

InterfaceIndexOrZero

Read-only

This object indicates the index of the interface that receives or sends the last Assert message.

This object is implemented as defined in the corresponding MIB file.

pimLastAssertGroupAddressType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.25

pimLastAssertGroupAddressType

InetAddressType

Read-only

This object indicates the type of the group address carried in the last received or sent Assert message.

This object is implemented as defined in the corresponding MIB file.

pimLastAssertGroupAddress

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.26

pimLastAssertGroupAddress

InetAddres

Read-only

This object indicates the group address carried in the last received or sent Assert message.

This object is implemented as defined in the corresponding MIB file.

pimLastAssertSourceAddressType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.27

pimLastAssertSourceAddressType

InetAddressType

Read-only

This object indicates the type of the source address carried in the last received or sent Assert message.

This object is implemented as defined in the corresponding MIB file.

pimLastAssertSourceAddress

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.28

pimLastAssertSourceAddress

InetAddress

Read-only

This object indicates the source address carried in the last received or sent Assert message.

This object is implemented as defined in the corresponding MIB file.

pimNeighborLossNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.29

pimNeighborLossNotificationPeriod

Unsigned32

Read-write

This object indicates the interval at which an alarm about a neighbor-loss event is reported.

The value ranges from 0 to 65535.

The default value is 0, that is, an alarm about the neighbor-loss event is reported immediately.

This object is implemented as defined in the corresponding MIB file.

pimNeighborLossCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.30

pimNeighborLossCount

Counter32

Read-only

This object indicates times of neighbor-loss events. Only statistics about neighbor-loss events on the interface with the smallest IP address across the network segment are collected.

This object is implemented as defined in the corresponding MIB file.

pimInvalidRegisterNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.31

pimInvalidRegisterNotificationPeriod

Unsigned32

Read-write

This object indicates the interval at which an alarm about an invalid Register message is reported.

The value ranges from 10 to 65535.

The default value is 65535, indicating that no alarm about the invalid Register message is reported.

This object is implemented as defined in the corresponding MIB file.

pimInvalidRegisterMsgsRcvd

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.32

pimInvalidRegisterMsgsRcvd

Counter32

Read-only

This object indicates the total number of the received invalid Register messages.

This object is implemented as defined in the corresponding MIB file.

pimInvalidRegisterAddressType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.33

pimInvalidRegisterAddressType

InetAddressType

Read-only

This object indicates the address type carried in the invalid Register message that is last received.

This object is implemented as defined in the corresponding MIB file.

pimInvalidRegisterOrigin

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.34

pimInvalidRegisterOrigin

InetAddress

Read-only

This object indicates the source address carried in the invalid Register message that is last received.

This object is implemented as defined in the corresponding MIB file.

pimInvalidRegisterGroup

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.35

pimInvalidRegisterGroup

InetAddress

Read-only

This object indicates the group address carried in the invalid Register message that is last received.

This object is implemented as defined in the corresponding MIB file.

pimInvalidRegisterRp

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.36

pimInvalidRegisterRp

InetAddress

Read-only

This object indicates the RP address carried in the invalid Register message that is last received.

This object is implemented as defined in the corresponding MIB file.

pimInvalidJoinPruneNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.37

pimInvalidJoinPruneNotificationPeriod

Unsigned32

Read-write

This object indicates the interval at which an alarm about the invalid Join or Prune message is reported.

The value ranges from 10 to 65535.

The default value is 65535, indicating that no alarm about an invalid Join or Prune message is reported.

This object is implemented as defined in the corresponding MIB file.

pimInvalidJoinPruneMsgsRcvd

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.38

pimInvalidJoinPruneMsgsRcvd

Counter32

Read-only

This object indicates the total number of the received invalid Join or Prune messages.

This object is implemented as defined in the corresponding MIB file.

pimInvalidJoinPruneAddressType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.39

pimInvalidJoinPruneAddressType

InetAddressType

Read-only

This object indicates the address type carried in the invalid Join or Prune message that is last received.

This object is implemented as defined in the corresponding MIB file.

pimInvalidJoinPruneOrigin

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.40

pimInvalidJoinPruneOrigin

InetAddress

Read-only

This object indicates the source address of the invalid Join or Prune message that is last received.

This object is implemented as defined in the corresponding MIB file.

pimInvalidJoinPruneGroup

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.41

pimInvalidJoinPruneGroup

InetAddress

Read-only

This object indicates the group address carried in the invalid Join or Prune message that is last received.

This object is implemented as defined in the corresponding MIB file.

pimInvalidJoinPruneRp

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.42

pimInvalidJoinPruneRp

InetAddress

Read-only

This object indicates the RP address carried in the invalid Join or Prune message that is last received.

This object is implemented as defined in the corresponding MIB file.

pimRPMappingNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.43

pimRPMappingNotificationPeriod

Unsigned32

Read-write

This object indicates the interval at which an alarm about an RP change event is reported.

The value ranges from 0 to 65535.

The default value is 65535, indicating that no alarm about the RP change event is reported.

This object is implemented as defined in the corresponding MIB file.

pimRPMappingChangeCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.44

pimRPMappingChangeCount

Counter32

Read-only

This object indicates the number of RP change events.

This object is implemented as defined in the corresponding MIB file.

pimInterfaceElectionNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.45

pimInterfaceElectionNotificationPeriod

Unsigned32

Read-write

This object indicates the interval at which an alarm about a DR election event is reported.

The value ranges from 0 to 65535.

The default value is 65535.

This object is implemented as defined in the corresponding MIB file.

pimInterfaceElectionWinCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.46

pimInterfaceElectionWinCount

Counter32

Read-only

This object indicates the number of DR selection events. The number of DR selection events increases only after the first Hello packet is sent.

This object is implemented as defined in the corresponding MIB file.

pimRefreshInterval

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.47

pimRefreshInterval

Unsigned32

Read-write

This object indicates the interval at which a State-Refresh message is sent.

The value ranges from 0 to 65535.

The default value is 60.

Currently, the value ranges from 1 to 255.

pimDeviceConfigStorageType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.48

pimDeviceConfigStorageType

StorageType

Read-write

This object indicates the storage type of configuration.

This scalar is not implemented. When the Get operation is performed, the default value nonVolatile is returned.

Currently, the Set operation is not supported.

Description of MIB Tables

pimInterfaceTable

This table lists parameters of interfaces enabled with PIM.

The indexes of this table are pimInterfaceIfIndex and pimInterfaceIPVersion.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.1.1.1

pimInterfaceIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of the PIM interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.2

pimInterfaceipVersion

InetVersion

Not-accessible

This object indicates the IP version of the PIM interface.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.3

pimInterfaceAddressType

InetAddressType

Read-only

This object indicates the address type of the PIM interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.4

pimInterfaceAddress

InetAddress

Read-only

This object indicates the IP address of the PIM interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.5

pimInterfaceGenerationIDValue

Unsigned32

Read-only

This object indicates the GenerationID of the PIM interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.6

pimInterfaceDR

InetAddress

Read-only

This object indicates the DR address of the PIM interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.7

pimInterfaceDRPriority

Unsigned32

Read-create

This object indicates the DR priority of the PIM interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.8

pimInterfaceDRPriorityEnabled

TruthValue

Read-only

This object indicates whether the DR priority is enabled in the network segment where the PIM interface resides.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.9

pimInterfaceHelloInterval

Unsigned32

Read-create

This object indicates the interval for an interface to send PIM Hello packets.

The value ranges from 0 to 18000.

The default value is 30.

Currently, the value range of 1 to 18000 is supported.

1.3.6.1.2.1.157.1.1.1.10

pimInterfaceTrigHelloInterval

Unsigned32

Read-create

This object indicates the interval at which the PIM interface sends Triggered Hello messages.

The value ranges from 0 to 60.

The default value is 5.

Currently, the value ranges from 1 to 5.

1.3.6.1.2.1.157.1.1.1.11

pimInterfaceHelloHoldtime

Unsigned32

Read-create

This object indicates the holdtime of the PIM neighbor.

The value ranges from 0 to 65535.

The default value is 105.

Currently, the value ranges from 1 to 65535.

1.3.6.1.2.1.157.1.1.1.12

pimInterfaceJoinPruneInterval

Unsigned32

Read-create

This object indicates the interval for a PIM interface to send Join or Prune messages.

The value ranges from 0 to 18000.

The default value is 60.

Currently, the value range of 1 to 18000 is supported.

1.3.6.1.2.1.157.1.1.1.13

pimInterfaceJoinPruneHoldtime

Unsigned32

Read-create

This object indicates the Holdtime value carried in Join or Prune messages.

The value ranges from 0 to 65535.

The default value is 210.

Currently, the value ranges from 1 to 65535.

1.3.6.1.2.1.157.1.1.1.14

pimInterfaceDFElectionRobustness

Unsigned32

Read-create

This object indicates the robustness variable for DF election.

The default value is 3.

Currently, the maximum access is read-only.

1.3.6.1.2.1.157.1.1.1.15

pimInterfaceLanDelayEnabled

TruthValue

Read-only

This object indicates whether the LanDelay is enabled in the network segment where the PIM interface resides.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.16

pimInterfacePropagationDelay

Unsigned32

Read-create

This object indicates the LanDelay value of the PIM interface.

The value ranges from 0 to 32767.

The default value is 500.

Currently, the value ranges from 1 to 32767.

1.3.6.1.2.1.157.1.1.1.17

pimInterfaceOverrideInterval

Unsigned32

Read-create

This object indicates the Override interval of the PIM interface.

The value ranges from 0 to 65535.

The default value is 2500.

Currently, the value ranges from 1 to 65535.

1.3.6.1.2.1.157.1.1.1.18

pimInterfaceEffectPropagDelay

Unsigned32

Read-only

This object indicates the LanDelay value of the network segment where the PIM interface is configured.

The value ranges from 0 to 32767.

Currently, the value ranges from 1 to 32767.

1.3.6.1.2.1.157.1.1.1.19

pimInterfaceEffectOverrideIvl

Unsigned32

Read-only

This object indicates the Override interval of the network segment where the PIM interface resides.

The value ranges from 0 to 65535.

Currently, the value ranges from 1 to 65535.

1.3.6.1.2.1.157.1.1.1.20

pimInterfaceSuppressionEnabled

TruthValue

Read-only

This object indicates whether the Join suppression is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.21

pimInterfaceBidirCapable

TruthValue

Read-only

This object indicates whether bidirectional PIM is enabled.

Currently, only the value False is returned.

1.3.6.1.2.1.157.1.1.1.22

pimInterfaceDomainBorder

TruthValue

Read-create

This object indicates whether the PIM BSR boundary is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.23

pimInterfaceStubInterface

TruthValue

Read-create

This object indicates whether PIM Silent is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.24

pimInterfacePruneLimitInterval

Unsigned32

Read-create

This object indicates the value of PruneLimitTimer on an interface. It is applicable only to PIM-DM.

The value ranges from 0 to 65535.

The default value is 60.

Currently, the maximum access is read-only; the return value 210 is supported only.

1.3.6.1.2.1.157.1.1.1.25

pimInterfaceGraftRetryInterval

Unsigned32

Read-create

This object indicates the interval at which a Graft message is resent by the PIM interface.

The value ranges from 0 to 65535.

The default value is 3.

Currently, the value ranges from 1 to 65535.

1.3.6.1.2.1.157.1.1.1.26

pimInterfaceSRPriorityEnabled

TruthValue

Read-only

This object indicates whether the state refresh function is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.1.1.27

pimInterfaceStatus

RowStatus

Read-create

This object indicates the row status.

  • active
  • createAndGo
  • destroy

Currently, active, createAndGo, and destroy are supported.

1.3.6.1.2.1.157.1.1.1.28

pimInterfaceStorageType

StorageType

Read-create

This object indicates the storage type of objects.

Currently, only the value nonVolatile is returned.

Currently, the maximum access is read-only.

Currently, Permanent is not supported.

Creation Restriction

You can create entries in this table only when the row status is CreateAndGo, and values of both pimInterfaceIfIndex and pimInterfaceipVersion are set.

Modification Restriction

The value of pimInterfaceTrigHelloInterval ranges from 0 to 60 in the MIB and from 1 to 5 in the command line. If you input a value larger than 5 in the command line, the setting fails and an error code is returned.

The minimum values of pimInterfaceHelloInterval, pimInterfaceTrigHelloInterval, pimInterfacePropagationDelay, pimInterfaceHelloHoldtime, pimInterfaceJoinPruneInterval, pimInterfaceJoinPruneHoldtime, pimInterfacePropagationDelay, pimInterfaceOverrideInterval, pimInterfaceEffectPropagDelay, pimInterfaceEffectOverrideIvl, and pimInterfaceGraftRetryInterval are all 0s in the MIB and 1 in the command line. If you input a value smaller than 1 in the command line, the setting fails and an error code is returned.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read only when multicast is enabled and PIM interfaces are configured.

The values of pimInterfaceHelloInterval and pimInterfaceJoinPruneInterva range from 0 to 18000 in the MIB and from 1 to 2147483647 in the command line. If the value read from the command line is greater than the maximum value in the MIB, the value 18000 is read.

pimNeighborTable

This table stores information about neighbors of all PIM interfaces.

The indexes of this table are pimNeighborIfIndex, pimNeighborAddressType, and pimNeighborAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.2.1.1

pimNeighborIfIndex

InterfaceIndex

Not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.2

pimNeighborAddressType

InetAddressType

Not-accessible

This object indicates the address type of a neighbor.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.3

pimNeighborAddress

InetAddress

Not-accessible

Indicates the IP address of a neighbor.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.4

pimNeighborGenerationIDPresent

TruthValue

Read-only

This object indicates whether a neighbor uses the GenerationID option.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.5

pimNeighborGenerationIDValue

Unsigned32

Read-only

This object indicates the GenerationID of a neighbor.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.6

pimNeighborUpTime

TimeTicks

Read-only

This object indicates the time when the neighbor relationship is set up.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.7

pimNeighborExpiryTime

TimeTicks

Read-only

This object indicates the timeout period of the neighbor relationship.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.8

pimNeighborDRPriorityPresent

TruthValue

Read-only

This object indicates whether a neighbor uses the DR priority option.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.9

pimNeighborDRPriority

Unsigned32

Read-only

This object indicates the DR Priority of a neighbor.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.10

pimNeighborLanPruneDelayPresent

TruthValue

Read-only

This object indicates whether a neighbor uses the LanPruneDelay option.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.11

pimNeighborTBit

TruthValue

Read-only

This object indicates whether the T Bit is enabled with a neighbor.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.12

pimNeighborPropagationDelay

Unsigned32

Read-only

This object indicates the LanDelay value of a neighbor.

The value ranges from 0 to 32767.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.13

pimNeighborOverrideInterval

Unsigned32

Read-only

This object indicates the Override value of a neighbor.

The value ranges from 0 to 65535.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.2.1.14

pimNeighborBidirCapable

TruthValue

read-only

This object indicates whether bidirectional PIM is enabled.

Currently, only the value False is returned.

Currently, only the value False is returned.

1.3.6.1.2.1.157.1.2.1.15

pimNeighborSRCapable

TruthValue

read-only

This object indicates whether the state refresh function is enabled. It is applicable only to PIM-DM.

Currently, only the value False is returned.

Currently, only the value False is returned.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

pimNbrSecAddressTable

This table stores information about secondary IP addresses of PIM neighbors. Only IPv6 neighbors have this table.

The indexes of this table are pimNbrSecAddressIfIndex, pimNbrSecAddressType, pimNbrSecAddressPrimary, and pimNbrSecAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.3.1.1

pimNbrSecAddressIfIndex

InterfaceIndex

Not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.3.1.2

pimNbrSecAddressType

InetAddressType

Not-accessible

This object indicates the type of an interface's secondary IP address.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.3.1.3

pimNbrSecAddressPrimary

InetAddress

Not-accessible

This object indicates the primary IP address of a neighbor.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.3.1.4

pimNbrSecAddress

InetAddress

Read-only

This object indicates the secondary IP address of a neighbor.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

pimStarGTable

This table stores information about IPv4 and IPv6 (*, G) entries on a device.

The indexes of this table are pimStarGAddressType and pimStarGGrpAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.4.1.1

pimStarGAddressType

InetAddressType

Not-accessible

This object indicates the type of a group address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.2

pimStarGGrpAddress

InetAddress

Not-accessible

This object indicates a group address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.3

pimStarGUpTime

TimeTicks

Read-only

This object indicates the time when an entry is created.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.4

pimStarGPimMode

PimMode

Read-only

The value of this object identifies the PIM mode.
  • 3: ASM
  • 4: Bidir (bidirectional PIM)

Currently, only ASM(3) is supported.

1.3.6.1.2.1.157.1.4.1.5

pimStarGRPAddressType

InetAddressType

Read-only

This object indicates the type of an RP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.6

pimStarGRPAddress

InetAddress

Read-only

This object indicates an RP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.7

pimStarGPimModeOrigin

PimGroupMappingOriginType

Read-only

The value of this object identifies the group address mapping by which the switch learns the RP.
  • ConfigRp (static RP)
  • BSR
  • AutoRp
  • Embedded

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.8

pimStarGRPIsLocal

TruthValue

Read-only

This object indicates whether the RP is on the local switch.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.9

pimStarGUpstreamJoinState

INTEGER{

notJoined

(1), joined

(2)}

Read-only

The value of this object identifies the status of the upstream interface of an (*, G) entry.
  • 1: NotJoined
  • 2: Joined

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.10

pimStarGUpstreamJoinTimer

TimeTicks

Read-only

This object indicates the interval at which periodical (*, G) Join messages are sent.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.11

pimStarGUpstreamNeighborType

InetAddressType

Read-only

This object indicates the address type of the upstream neighbor.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.12

pimStarGUpstreamNeighbor

InetAddress

Read-only

This object indicates the primary address of the upstream interface. This primary address is called RPF' (*, G) address in PIM-SM. The switch sends (*, G) Join messages to this address at a specified interval.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.13

pimStarGRPFIfIndex

InterfaceIndexOrZero

Read-only

This object indicates the index of an RPF interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.14

pimStarGRPFNextHopType

InetAddressType

Read-only

This object indicates the address type of the RPF next hop towards the RP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.15

pimStarGRPFNextHop

InetAddress

Read-only

This object indicates the address of the RPF next hop towards the RP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.16

pimStarGRPFRouteProtocol

IANAipRouteProtocol

Read-only

This object indicates the unicast routing protocol through which the route used to find the RPF interface towards the RP is learnt.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.17

pimStarGRPFRouteAddress

InetAddress

Read-only

This object indicates the destination address of the unicast route to the RPF interface towards the RP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.18

pimStarGRPFRoutePrefixLength

InetAddressPrefixLength

Read-only

This object indicates the mask length of the destination address of the unicast route to the RPF interface towards the RP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.19

pimStarGRPFRouteMetricPref

Unsigned32

Read-only

This object indicates the priority of the unicast route to the RPF interface towards the RP.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.4.1.20

pimStarGRPFRouteMetric

Unsigned32

Read-only

This object indicates the metric of the unicast route to the RPF interface towards the RP.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

pimStarGITable

This table stores information about interfaces of (*, G) entries on a device. An interface has this table only when one or more of the following conditions are met:

  • local_receiver_include (*, G, I) is True.

  • The Join/Prune status is not NoInfo.

  • The Assert status is not NoInfo.

The indexes of this table are pimStarGAddressType, pimStarGGrpAddress, and pimStarGIIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.5.1.1

pimStarGIIfIndex

InterfaceIndex

Not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.2

pimStarGIUpTime

TimeTicks

Read-only

This object indicates the time when an interface is created.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.3

pimStarGILocalMembership

TruthValue

Read-only

This object indicates whether the (*, G) entry has memberships on this interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.4

pimStarGIJoinPruneState

INTEGER

Read-only

The value of this object identifies the Join/Prune status of the downstream interface.
  • 1: noInfo
  • 2: join
  • 3: prunePending

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.5

pimStarGIPrunePendingTimer

TimeTicks

Read-only

This object indicates the value of the PrunePrending timer on an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.6

pimStarGIJoinExpiryTimer

TimeTicks

Read-only

This object indicates the timeout period of the Join status of an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.7

pimStarGIAssertState

INTEGER

Read-only

The value of this object identifies the Assert status of an interface.
  • 1: noInfo
  • 2: iAmAssertWinner
  • 3: iAmAssertLoser

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.8

pimStarGIAssertTimer

TimeTicks

Read-only

This object indicates the value of the Assert timer on an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.9

pimStarGIAssertWinnerAddressType

InetAddressType

Read-only

This object indicates the address type of the Assert Winner.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.10

pimStarGIAssertWinnerAddress

InetAddress

Read-only

This object indicates the address of the Assert Winner.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.11

pimStarGIAssertWinnerMetricPref

Unsigned32

Read-only

This object indicates the priority of the Assert Winner.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.5.1.12

pimStarGIAssertWinnerMetric

Unsigned32

Read-only

This object indicates the metric value of the Assert Winner.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

pimSGTable

This table stores information about (S, G) entries of IPv4/IPv6 PIM-SM and PIM-SSM on a device.

The indexes of this table are pimSGAddressType, pimSGGrpAddress, and pimSGSrcAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.6.1.1

pimSGAddressType

InetAddressType

Not-accessible

This object indicates the types of a source address and a group address.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.2

pimSGGrpAddress

InetAddress

Not-accessible

This object indicates a group address.

The length is 4, 8, 16, or 20 bytes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.3

pimSGSrcAddress

InetAddress

Not-accessible

This object indicates a source address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.4

pimSGUpTime

TimeTicks

Read-only

This object indicates the time when an (S, G) entry is created.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.5

pimSGPimMode

PimMode

Read-only

The value of this object identifies the PIM mode.
  • 2: SSM
  • 3: ASM

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.6

pimSGUpstreamJoinState

INTEGER

Read-only

The value of this object identifies the status of the upstream interface of an (S, G) entry.
  • 1: NotJoined
  • 2: joined

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.7

pimSGUpstreamJoinTimer

TimeTicks

Read-only

This object indicates the interval at which periodical (S, G) Join messages are sent.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.8

pimSGUpstreamNeighbor

InetAddress

Read-only

This object indicates the address of the upstream neighbor. This address is called RPF' (S, G) address in PIM-SM.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.9

pimSGRPFIfIndex

InterfaceIndexOrZero

Read-only

This object indicates the index of an RPF interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.10

pimSGRPFNextHopType

InetAddressType

Read-only

This object indicates the address type of the RPF next hop towards the source.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.11

pimSGRPFNextHop

InetAddress

Read-only

This object indicates the address of the RPF next hop towards the source.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.12

pimSGRPFRouteProtocol

IANAipRouteProtocol

Read-only

This object indicates the protocol type of the unicast route to the RPF interface towards the source.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.13

pimSGRPFRouteAddress

InetAddress

Read-only

This object indicates the destination address of the route to the source.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.14

pimSGRPFRoutePrefixLength

InetAddressPrefixLength

Read-only

This object indicates the mask of the destination address of the route to the source.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.15

pimSGRPFRouteMetricPref

Unsigned32

Read-only

This object indicates the priority of the route to the source.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.16

pimSGRPFRouteMetric

Unsigned32

Read-only

This object indicates the Metric value of the route to the source.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.17

pimSGSPTBit

TruthValue

Read-only

This object indicates whether an SPT flag is set for the (S, G) entry.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.18

pimSGKeepaliveTimer

TimeTicks

Read-only

This object indicates the remaining time before an (S, G) entry times out.

The value of this object is always 0.

1.3.6.1.2.1.157.1.6.1.19

pimSGDRRegisterState

INTEGER

Read-only

The value of this object identifies the register state of the source's DR.
  • 1: noInfo
  • 2: join
  • 3: joinPending
  • 4: prune

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.20

pimSGDRRegisterStopTimer

TimeTicks

Read-only

This object indicates the time when register stops.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.6.1.21

pimSGRPRegisterPMBRAddressType

InetAddressType

read-only

This object indicates the address type of an interface that sends Register messages.

The value of this object is:
  • IPv4(1)
  • IPv6(2)

1.3.6.1.2.1.157.1.6.1.22

pimSGRPRegisterPMBRAddress

InetAddress

read-only

This object indicates the address of an interface that sends Register messages.

The value of this object is always 0.

1.3.6.1.2.1.157.1.6.1.23

pimSGUpstreamPruneState

INTEGER

Read-only

The value of this object identifies the status of the upstream interface of an (S, G) entry.
  • 1: forwarding
  • 2: ackpending
  • 3: pruned

Currently, PIM-DM is not supported.

1.3.6.1.2.1.157.1.6.1.24

pimSGUpstreamPruneLimitTimer

TimeTicks

Read-only

This object indicates the value of PruneLimitTimer on the upstream interface of an (S, G) entry.

Currently, PIM-DM is not supported.

1.3.6.1.2.1.157.1.6.1.25

pimSGOriginatorState

INTEGER

Read-only

The value of this object identifies the Originator status of an (S, G) entry.
  • 1: notOriginator
  • 2: Originator

Currently, PIM-DM is not supported.

1.3.6.1.2.1.157.1.6.1.26

pimSGSourceActiveTimer

TimeTicks

Read-only

This object indicates the time when the Originator status changes from Originator to notOriginator.

Currently, PIM-DM is not supported.

1.3.6.1.2.1.157.1.6.1.27

pimSGStateRefreshTimer

TimeTicks

Read-only

This object indicates the value of the state refresh timer of an (S, G) entry.

Currently, PIM-DM is not supported.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Currently, pimSGKeepaliveTimer, pimSGRpRegisterPmbrAddressType, and pimSGRpRegisterPmbrAddress are not implemented. The value 0 is returned.

For objects pimSGUpstreamPruneState, pimSGUpstreamPruneLimitTimer, pimSGOriginatorState, and pimSGStateRefreshTimer, because the PIM-DM mode is not defined, the value 0 is returned.

pimSGITable

This table stores information about interfaces related to (S, G) entries on a device. An interface has this table only when one or more of the following conditions are met:

  • local_receiver_include (S, G, I) is True.

  • The Join/Prune status is not NoInfo.

  • The Assert status is not NoInfo.

The indexes of this table are pimSGAddressType, pimSGGrpAddress, pimSGSrcAddress, and pimSGIIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.7.1.1

pimSGIIfIndex

InterfaceIndex

Not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.7.1.2

pimSGIUpTime

TimeTicks

Read-only

This object indicates the time when an interface is created.

Currently, the return value 0 is supported only.

1.3.6.1.2.1.157.1.7.1.3

pimSGILocalMembership

TruthValue

Read-only

This object indicates local_receiver_include

(S, G, I), that is, whether the current interface is contained in the downstream interface list of the (S, G) entry.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.7.1.4

pimSGIJoinPruneState

INTEGER

Read-only

The value of this object identifies the Join/Prune status of the downstream interface.

  • 1: noInfo
  • 2: join
  • 3: prunePending

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.7.1.5

pimSGIPrunePendingTimer

TimeTicks

Read-only

This object indicates the value of the PrunePrending timer on an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.7.1.6

pimSGIJoinExpiryTimer

TimeTicks

Read-only

This object indicates the timeout period of an interface added to the (S, G) downstream interface list.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.7.1.7

pimSGIAssertState

INTEGER

Read-only

The value of this object identifies the Assert status of an interface.

  • 1: noInfo
  • 2: iAmAssertWinner
  • 3: iAmAssertLoser

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.7.1.8

pimSGIAssertTimer

TimeTicks

Read-only

This object indicates the timeout period of the Assert timer on an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.7.1.9

pimSGIAssertWinnerAddressType

InetAddressType

Read-only

This object indicates the address type of the Assert Winner.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.7.1.10

pimSGIAssertWinnerAddress

InetAddress

Read-only

This object indicates the address of the Assert Winner.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.7.1.11

pimSGIAssertWinnerMetricPref

Unsigned32

Read-only

This object indicates the priority of the Assert Winner.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.7.1.12

pimSGIAssertWinnerMetric

Unsigned32

Read-only

This object indicates the metric value of the Assert Winner.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Currently, for pimSGIUpTime, the return value 0 is supported only.

pimSGRptTable

This table stores information about (S, G) entries and RPT status on a device. Only PIM-SM entries have this table.

The indexes of this table are pimStarGAddressType, pimStarGGrpAddress, and pimSGRptSrcAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.8.1.1

pimSGRptSrcAddress

InetAddress

Not-accessible

This object indicates a source address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.8.1.2

pimSGRptUpTime

TimeTicks

Read-only

This object indicates the time when an (S, G) entry is created.

The real value is 0.

1.3.6.1.2.1.157.1.8.1.3

pimSGRptUpstreamPruneState

INTEGER

Read-only

The value of this object identifies the status of the upstream RPT of an (S, G) entry.
  • 1: rptNotJoined
  • 2: pruned
  • 3: notPruned

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.8.1.4

pimSGRptUpstreamOverrideTimer

TimeTicks

Read-only

This object indicates the time when the local device sends a (S, G, RPT) Join message upstream.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

pimSGRptITable

This table stores information about interfaces of (S, G) entries on a device. Only the interfaces working in PIM-SM mode and with the Join/Prune status not being NoInfo have this table.

The indexes of this table are pimStarGAddressType, pimStarGGrpAddress, pimSGRptSrcAddress, and pimSGRptIIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.9.1.1

pimSGRptIIfIndex

InterfaceIndex

Not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.9.1.2

pimSGRptIUpTime

TimeTicks

Read-only

This object indicates the time when an interface is added to the downstream interface list of an (S, G) entry.

Currently, the return value 0 is supported only.

1.3.6.1.2.1.157.1.9.1.3

pimSGRptILocalMembership

TruthValue

Read-only

This object indicates whether an interface has group members of (*, G, Include) and (S, G, Exclude) entries.

Currently, the return value false is supported only.

1.3.6.1.2.1.157.1.9.1.4

pimSGRptIJoinPruneState

INTEGER

Read-only

The value of this object identifies the status of a downstream interface receiving the Join or Prune message for (S, G, RPT).
  • 1: noInfo
  • 2: prune
  • 3: prunePending

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.9.1.5

pimSGRptIPrunePendingTimer

TimeTicks

Read-only

This object indicates the remaining time before the local device starts pruning this source off the RP tree.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.9.1.6

pimSGRptIPruneExpiryTimer

TimeTicks

Read-only

This object indicates the timeout period of Prune status of (S, G, RPT) entries.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Currently, for pimSGRptIUpTime, the return value 0 is supported only.

The return value of pimSGRptILocalMembership is false.

pimGroupMappingTable

This table stores information about group mappings on a device.

The indexes of this table are pimGroupMappingOrigin, pimGroupMappingAddressType, pimGroupMappingGrpAddress, pimGroupMappingGrpPrefixLength, pimGroupMappingRpAddressType, and pimGroupMappingRpAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.157.1.13.1.1

pimGroupMappingOrigin

PimGroupMappingOriginType

Not-accessible

This object indicates the type of a group mapping.

Currently, BSR and Auto-RP are supported only.

1.3.6.1.2.1.157.1.13.1.2

pimGroupMappingAddressType

InetAddressType

Not-accessible

This object indicates the type of a group address.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.13.1.3

pimGroupMappingGrpAddress

InetAddress

Not-accessible

This object indicates a group address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.13.1.4

pimGroupMappingGrpPrefixLength

InetAddressPrefixLength

Not-accessible

This object indicates the mask of a group address.

In the case of an IPv4 address, the value ranges from 4 to 32.

In the case of an IPv6 address, the value ranges from 8 to 128.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.13.1.5

pimGroupMappingRPAddressType

InetAddressType

Not-accessible

This object indicates the type of an RP address.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.13.1.6

pimGroupMappingRPAddress

InetAddress

Not-accessible

This object indicates an RP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.157.1.13.1.7

pimGroupMappingPimMode

PimMode

Read-only

This object indicates the PIM mode.

Currently, SM is supported only.

1.3.6.1.2.1.157.1.13.1.8

pimGroupMappingPrecedence

Unsigned32

Read-only

This object indicates the priority of an RP mapping.
  • 1: Auto-RP mapping
  • 2: BSR-RP mapping
Currently, the following priorities are supported only:
  • 0: Auto-RP
  • 1: BSR-RP

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Description of Alarm Objects

pimNeighborLoss

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.2.1.157.0.1

pimNeighborLoss

pimNeighborUpTime

After receiving a Hello message from a neighbor, a device records information about the neighbor and starts a timer for the neighbor. If the device does not receive any Hello message from the neighbor before the timer expires, and no IP address of other neighbors on the interface is smaller than that of the device, a trap message is reported.

This object is implemented as defined in the corresponding MIB file.

pimInvalidRegister

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.2.1.157.0.2

pimInvalidRegister

  • pimGroupMappingpimMode

  • pimInvalidRegisterAddressType

  • pimInvalidRegisterOrigin

  • pimInvalidRegisterGroup

  • pimInvalidRegisterRp

This object indicates that an invalid Register message is received.

Currently, invalid Register messages in SSM are not supported.

pimInvalidJoinPrune

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.2.1.157.0.3

pimInvalidJoinPrune

  • pimGroupMappingpimMode

  • pimInvalidJoinPruneAddressType

  • pimInvalidJoinPruneOrigin

  • pimInvalidJoinPruneGroup

  • pimInvalidJoinPruneRp

  • pimNeighborUpTime

This object indicates that an invalid Join or Prune message is received.

This object is implemented as defined in the corresponding MIB file.

pimRPMappingChange

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.2.1.157.0.4

pimRPMappingChange

  • pimGroupMappingpimMode

  • pimGroupMappingPrecedence

This object indicates that RP information is changed on a device.

This object is implemented as defined in the corresponding MIB file.

pimInterfaceElection

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.2.1.157.0.5

pimInterfaceElection

  • pimInterfaceAddressType

  • pimInterfaceAddress

This object indicates that a device is elected as a DR.

This object is implemented as defined in the corresponding MIB file.

Unsupported Objects

The device does not support the functions mapping the objects listed in following table. Do not use these objects to maintain the device.

Table 167-1  List of unsupported objects

Object OID

Object Name

Table Containing the Object

1.3.6.1.2.1.157.1.12

pimAnycastRPSetTable

Single object

1.3.6.1.2.1.157.1.12.1.1

pimAnycastRPSetAddressType

pimAnycastRPSetTable

1.3.6.1.2.1.157.1.12.1.2

hwBgpPeerPrefixRcvCounter

pimAnycastRPSetTable

1.3.6.1.2.1.157.1.12.1.3

pimAnycastRPSetRouterAddress

pimAnycastRPSetTable

1.3.6.1.2.1.157.1.12.1.4

pimAnycastRPSetLocalRouter

pimAnycastRPSetTable

1.3.6.1.2.1.157.1.12.1.5

pimAnycastRPSetRowStatus

pimAnycastRPSetTable

1.3.6.1.2.1.157.1.12.1.6

pimAnycastRPSetStorageType

pimAnycastRPSetTable

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178122

Views: 782375

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next