No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
inetCidrRouteTable

inetCidrRouteTable

This table is used to query information about active routes and created static routes of the public network.

The index of this table is inetCidrRouteDestType; inetCidrRouteDest; inetCidrRoutePfxLen; inetCidrRoutePolicy; inetCidrRouteNextHopType; inetCidrRouteNextHop.

NOTE:
The S12700 does not support the following MIB objects:
  • 1.3.6.1.2.1.4.24.7.1.11 inetCidrRouteNextHopAS
  • 1.3.6.1.2.1.4.24.7.1.13 inetCidrRouteMetric2
  • 1.3.6.1.2.1.4.24.7.1.14 inetCidrRouteMetric3
  • 1.3.6.1.2.1.4.24.7.1.15 inetCidrRouteMetric4
  • 1.3.6.1.2.1.4.24.7.1.16 inetCidrRouteMetric5

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.4.24.7.1.1

inetCidrRouteDestType

InetAddressType

Not-accessible

This object indicates the type of the destination address, either IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.4.24.7.1.2

inetCidrRouteDest

InetAddress

Not-accessible

This object indicates the destination address of a route.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.4.24.7.1.3

inetCidrRoutePfxLen

InetAddressPrefixLength

Not-accessible

This object indicates the mask length of the destination address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.4.24.7.1.4

inetCidrRoutePolicy

Object Identifier

Not-accessible

This object is an opaque object without any defined semantics.

Its purpose is to serve as an additional index that may delineate between multiple entries to the same destination.

This object is not supported by protocols currently, and the return value is the default value 2.0.0.

1.3.6.1.2.1.4.24.7.1.5

inetCidrRouteNextHopType

InetAddressType

Not-accessible

This object indicates the type of the next hop address, either IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.4.24.7.1.6

inetCidrRouteNextHop

InetAddress

Not-accessible

This object indicates the next hop of the route.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.4.24.7.1.7

inetCidrRouteIfIndex

InterfaceIndexOrZero

Read-create

This object indicates the outbound interface index of the route. The outbound interface refers to the interface connecting the local device to the next hop.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.4.24.7.1.8

inetCidrRouteType

INTEGER{other(1),reject(2),local(3),remote(4),blackhole(5)}

Read-create

Indicates the type of a route:

  • other(1)
  • reject(2): a route which, if matched, discards the message as unreachable.
  • local(3): a route for which the next hop is the final destination
  • remote(4): a route for which the next hop is not the final destination.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.4.24.7.1.9

inetCidrRouteProto

IANAipRouteProtocol

Read-only

This object indicates a routing protocol.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.4.24.7.1.10

inetCidrRouteAge

Gauge32

Read-only

This object indicates the number of seconds since this route was last updated or otherwise determined to be correct.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.4.24.7.1.11

inetCidrRouteNextHopAS

InetAutonomousSystemNumber

Read-create

This object indicates the next hop AS number of a BGP route.

The maximum access to this object is read-only.

4-byte AS numbers range from 0 to 4294967295. When an AS number is greater than 2147483647, it is displayed as a negative value.

1.3.6.1.2.1.4.24.7.1.12

inetCidrRouteMetric1

Integer32

Read-create

This object indicates the metric for the route.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.2.1.4.24.7.1.13

inetCidrRouteMetric2

Integer32

Read-create

This object indicates the metric for the route.

The maximum access to this object is read-only.

This object is not supported by protocols currently. The return value is the default value -1.

1.3.6.1.2.1.4.24.7.1.14

inetCidrRouteMetric3

Integer32

Read-create

This object indicates the metric for the route.

The maximum access to this object is read-only.

This object is not supported by protocols currently. The return value is the default value -1.

1.3.6.1.2.1.4.24.7.1.15

inetCidrRouteMetric4

Integer32

Read-create

This object indicates the metric for the route.

The maximum access to this object is read-only.

This object is not supported by protocols currently. The return value is the default value -1.

1.3.6.1.2.1.4.24.7.1.16

inetCidrRouteMetric5

Integer32

Read-create

This object indicates the metric for the route.

The maximum access to this object is read-only.

This object is not supported by protocols currently. The return value is the default value -1.

1.3.6.1.2.1.4.24.7.1.17

inetCidrRouteStatus

RowStatus

Read-create

This object indicates the row status variable, used according to row installation and removal conventions.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Only static routes of the public network can be created.

Modification Restriction

Only static routes of the public network can be modified.

Deletion Restriction

Only static routes of the public network can be deleted.

Access Restriction

The entries in this table can be read only when there are routes in the routing table.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 759841

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next