No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NQA-MIB

NQA-MIB

Functions Overview

NQA is short for network quality analysis. To meet various QoS requirements of carriers, NQA provides statistics about round-trip time (RTT), jitter, and packet loss ratio about the managed devices for the Network Management System (NMS) by creating test instances and recording test results.

The NQA-MIB is a private MIB used for the NMS to manage the NQA module. It provides a MIB interface for the NM station. Through the NQA-MIB, an NM station can perform the following operations:

  • Create or delete NQA test instances.

  • Modify parameters of test instances.

  • Obtain test results of NQA test instances.

According to the configuration on the NM station, the device can also automatically send trap messages to the NM station.

The OID of the root object is:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).nqa(111).

Relationships Between Tables

Relationship Between nqaAdminCtrlTable and nqaAdminParaTable

Users create tests instances through nqaAdminCtrlTable and then configure corresponding parameters for different services through nqaAdminParaTable. The two tables both use nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName to uniquely identify a test instance.

Figure 162-1  Relationship between nqaAdminCtrlTable and nqaAdminParaTable

Relationship Between nqaAdminCtrlTable and nqaScheduleTable

Users create test instances through nqaAdminCtrlTable and schedule the created test instances through nqaScheduleTable. The two tables both use nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName to uniquely identify a test instance.

Figure 162-2  Relationship between nqaAdminCtrlTable and nqaScheduleTable

Relationship Between nqaAdminCtrlTable and nqaResultsTable

Users create test instances through nqaAdminCtrlTable and view statistics about test results through nqaResultsTable after test instances are performed. The two tables both use nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName to uniquely identify a test instance. In addition, nqaResultsTable uses nqaResultsIndex and nqaResultsHopIndex to uniquely identify the test result of the current test instance.

Figure 162-3  Relationship between nqaAdminCtrlTable and nqaResultsTable

Relationship Between nqaAdminCtrlTable and nqaHTTPStatsTable

Users create test instances through nqaAdminCtrlTable and view statistics about HTTP test results through nqaHTTPStatsTable after test instances are performed. The two tables both use nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName to uniquely identify a test instance. In addition, nqaHTTPStatsTable uses nqaHTTPStatsIndex to uniquely identify the test result of the current HTTP test instance.

Figure 162-4  Relationship between nqaAdminCtrlTable and nqaHTTPStatsTable

Relationship Between nqaAdminCtrlTable and nqaJitterStatsTable

Users create test instances through nqaAdminCtrlTable and view statistics about test results through nqaJitterStatsTable after test instances are performed. The two tables both use nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName to uniquely identify a test instance. In addition, nqaJitterStatsTable uses nqaJitterStatsIndex to uniquely identify the test result of the current Jitter test instance.

Figure 162-5  Relationship between nqaAdminCtrlTable and nqaJitterStatsTable

Relationship Between nqaAdminCtrlTable and nqaFTPStatsTable

Users create test instances through nqaAdminCtrlTable and view statistics about FTP test results through nqaFTPStatsTable after test instances are performed. The two tables both use nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName to uniquely identify a test instance. In addition, nqaFTPStatsTable uses nqaFTPStatsIndex to uniquely identify the test result of the current FTP test instance.

Figure 162-6  Relationship between nqaAdminCtrlTable and nqaFTPStatsTable

Relationship Between nqaAdminCtrlTable and nqaMtracertStatsTable

You can create a test instance through the nqaAdminCtrlTable table. Run the test instance, and then you can view the statistics of the Multicast tracert test in the nqaMtracertStatsTable table. Both tables use the nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName indexes to uniquely identify a test instance. In addition, the nqaMtracertStatsTable table needs to use the nnqaMtracertStatsIndex and nqaMtracertStatsHopIndex indexes to uniquely identify the result of a multicast tracert test performed by the current test instance.

Figure 162-7  Relationship between the administration control table of the NQA test instance and result statistics table of the multicast tracert test instance

Relationship Between nqaAdminCtrlTable and nqaHistoryTable

Users create test instances through nqaAdminCtrlTable and view history records about test instances through nqaHistoryTable after test instances are performed.

The two tables both use nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName to uniquely identify a test instance. In addition, nqaHistoryTable uses nqaHistoryIndex, nqaHistoryProbeIndex, and nqaHistoryHopIndex to uniquely identify a history record of the current test instance.

Figure 162-8  Relationship between nqaAdminCtrlTable and nqaHistoryTable

Relationship Between nqaAdminCtrlTable and nqaMtracertHistoryTable

You can create a test instance through the nqaAdminCtrlTable table. Run the test instance, and then you can view the history statistics of the multicast trace test in the nqaMtracertHistoryTable table. Both tables use the nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName indexes to uniquely identify a test instance. In addition, the nqaMtracertHistoryTable table needs to use the nqaMtracertHistoryIndex and nqaMtracertHistoryHopIndex indexes to uniquely identify the history statistics of a multicast trace test performed by the current test instance.

Figure 162-9  Relationship between the administration control table of the NQA test instance and the history statistics table of the multicast trace test instance

Relationship Between nqaAlarmTable and nqaEventTable

Figure 162-10  Relationships between nqaAlarmTable and nqaEventTable

You can create an event through nqaEventTable and then bind the index of the event to nqaAlarmTable to monitor the event that is triggered when the threshold of the object is exceeded. nqaEventTable uniquely identifies an event according to the index of the event.

Relationship Between nqaAdminCtrlTable and nqaJitterCollectStatsTable

nqaAdminCtrlTable is used to create a test instance. After the test instance is enabled, nqaJitterCollectStatsTable can be used to display the statistics on the test instance. In both tables, nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName are used to uniquely identify a test instance. In addition, in nqaJitterCollectStatsTable, nqaJitterCollectStatsIndex is used to uniquely identify the piece of statistics on jitter of the current test instance.

Figure 162-11  Relationship Between nqaAdminCtrlTable and nqaJitterCollectStatsTable

Description of Single Objects

nqaVersion

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.1

nqaVersion

DisplayString

Read-only

This object indicates the version information of the NQA-MIB. The version is in the format of x.x, such as 1.1. It is used for version management.

This object is implemented as defined in the corresponding MIB files.

nqaEnable

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.2

nqaEnable

EnableValue

Read-write

Indicates the switch of enabling NQA client.

The value range:
  • enable:1
  • disable:2
The default value is enable(1).

Currently, only support the setting of value to enable(1).

nqaReset

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.3

nqaReset

EnableValue

Read-write

The value of this object identifies whether clearing all configurations of test instances is enabled.

The value range:
  • enable:1
  • disable:2
The default value is disable(2).

This object is implemented as defined in the corresponding MIB files.

nqaTimeOfLastSetError

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.4

nqaTimeOfLastSetError

DateAndTime

Read-only

This object indicates the time when the last configuration operation failed.

0 indicates that the configuration does not fail.

This object is implemented as defined in the corresponding MIB files.

nqaLastSetError

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.5

nqaLastSetError

DisplayString

Read-only

This object indicates the description about the last failed configuration operation.

0 indicates that the configuration does not fail.

This object is implemented as defined in the corresponding MIB files.

nqaNumOfCurrentCtrlEntry

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.6

nqaNumOfCurrentCtrlEntry

Integer32

Read-write

The value of this object identifies the total number of test instances currently configured.

Currently, the maximum access is read-only.

nqaMaxConcurrentRequests

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.7

nqaMaxConcurrentRequests

Unsigned32

Read-write

The value of this object identifies maximum number of concurrent active requests that are allowed within an agent implementation.

Currently, the maximum access is read-only.

nqaMaxNumOfRequests

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.8

nqaMaxNumOfRequests

Unsigned32

Read-only

The value of this object identifies maximum number of configurable test instances.

This object is implemented as defined in the corresponding MIB files.

nqaJitterVersion

OID

Object Name

Syntax

Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.9

nqaJitterVersion

Integer32

Read-write

Selects the version of jitter test.

The value range:
  • old version:1
  • new version:2
The default value is old version(1).

This object is implemented as defined in the corresponding MIB files.

nqaSupportTestType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.10

nqaSupportTestType

BITS

  • icmp(0)
  • tcp(1)
  • udp(2)
  • http(3)
  • ftp(4)
  • jitter(5)
  • snmp(6)
  • trace(7)
  • lspPing(8)
  • lspTrace(9)
  • dns(10)
  • pwe3Ping(13)
  • pwe3Trace(14)
  • mTrace(16)
  • macPing(17)
  • lspJitter(19)
  • icmpJitter(20)
  • pathJitter(21)
  • rtptest(36)
  • rtpsnoop(37)

Read-only

Test type that the current device supports. Data structure of the type is in the format of bits. Each bit represents a test type.

The mappings between bits and tests are as follows:
  • icmp(0)
  • tcp(1)
  • udp(2)
  • http(3)
  • ftp(4)
  • jitter(5)
  • snmp(6)
  • trace(7)
  • lspPing(8)
  • lspTrace(9)
  • dns(10)
  • pwe3Ping(13)
  • pwe3Trace(14)
  • mTrace(16)
  • macPing(17)
  • lspJitter(19)
  • icmpJitter(20)
  • pathJitter(21)
  • rtptest(36)
  • rtpsnoop(37)

This object is implemented as defined in the corresponding MIB files.

nqaSupportServerType

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.11

nqaSupportServerType

BITS

  • tcpServer(0)
  • udpServer(1)
  • icmpServer(2)
  • rtpudpServer(3)
  • rtptcpServer(4)

Read-only

Server type that the current device supports.Data structure of the type is in the format of bits.Each bit represents a test type.

  • tcpServer(0)
  • udpServer(1)
  • icmpServer(2)
  • rtpudpServer(3)
  • rtptcpServer(4)

This object is implemented as defined in the corresponding MIB files.

nqaRtptestMaxConcurrentNumber

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.12

nqaRtptestMaxConcurrentNumber

Integer32

read-only

This object indicates the maximum number of RTP test instances that can run simultaneously.

This object is implemented as defined in the corresponding MIB file.

nqaRtpsnoopMaxConcurrentNumber

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.13

nqaRtpsnoopMaxConcurrentNumber

Integer32

read-only

This object indicates the maximum number of RTP snoop test instances that can run simultaneously.

This object is implemented as defined in the corresponding MIB file.

nqaRtpudpMaxConcurrentNumber

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.14

nqaRtpudpMaxConcurrentNumber

Integer32

read-only

This object indicates the maximum number of RTP-UDP servers that can work simultaneously.

This object is implemented as defined in the corresponding MIB file.

nqaRtptcpMaxConcurrentNumber

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.1.15

nqaRtptcpMaxConcurrentNumber

Integer32

read-only

This object indicates the maximum number of RTP-TCP servers that can work simultaneously.

This object is implemented as defined in the corresponding MIB file.

nqaServerEnable

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.3.1

nqaServerEnable

EnableValue

Read-write

The value of this object identifies whether the servers of the TCP, UDP, and Jitter tests are enabled.

Only support the setting of value enable(1). The default value is enable(1).

nqaMaxAlarmNum

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.9.1

nqaMaxAlarmNum

Integer32(1..2147483647)

Read-only

Maximum number of alarms.

This object is implemented as defined in the corresponding MIB files.

nqaMaxEventNum

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.9.2

nqaMaxEventNum

Integer32Integer32(1..2147483647)

Read-only

Maximum number of events that alarms can trigger.

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordEnable

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.10.1

nqaFtpSaveRecordEnable

EnabledStatus

Read-write

Identifies whether saving test results to the FTP server through FTP is enabled.

  • enable(1)
  • disable(2)
By default, the value is disable(2).

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordIpAddr

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.10.2

nqaFtpSaveRecordIpAddr

InetAddress

Read-write

Set the IP address of the FTP server to which test results are saved.

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordVrfName

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.10.3

nqaFtpSaveRecordVrfName

OCTET STRING (SIZE(0..31))

Read-write

Set the name of the VRF instance for the FTP server to which test results are saved.

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordUserName

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.10.4

nqaFtpSaveRecordUserName

OCTET STRING (SIZE(0..255))

Read-write

Set the user name of the FTP server to which test results are saved.

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordPassword

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.10.5

nqaFtpSaveRecordPassword

OCTET STRING (SIZE(0..32))

Read-write

Set the user name used when saving test results to Set the password used when saving test results to the FTP server.

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordFileName

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.10.6

nqaFtpSaveRecordFileName

STRING (SIZE(0..200))

Read-write

Set the file name of used by the FTP server to save test results.

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordItemNum

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.10.7

nqaFtpSaveRecordItemNum

Integer32 (10000..2147483647)

Read-write

Set the number when a file is created on the FTP server.The default value is 100000.

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordTime

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.10.8

nqaFtpSaveRecordTime

Integer32 (1..43200)

Read-write

Set the time when a file is created on the FTP server.The default duration is 60 minutes.

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordNotificationEnable

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.10.9

nqaFtpSaveRecordNotificationEnable

EnabledStatus

Read-write

Set whether to send trap messages when saving test results to the FTP server is completed. By default, the value is disable(2).

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordLastFileName

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.10.10

nqaFtpSaveRecordLastFileName

OCTET STRING (SIZE(0..220))

Read-only

Set the name of the file used to save the last test record to the FTP server.

This object is implemented as defined in the corresponding MIB files.

Description of MIB Tables

nqaAdminCtrlTable

nqaAdminCtrlTable is the configuration table of the NQA test instance.

The indexes of this table are nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.2.1.1.1

nqaAdminCtrlOwnerIndex

SnmpAdminString (SIZE(0..32))

Not-accessible

This object indicates the index of the administrator of the test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.1.1.2

nqaAdminCtrlTestName

SnmpAdminString (SIZE(0..32))

Not-accessible

This object indicates the index of the name of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.1.1.3

nqaAdminCtrlTag

DisplayString

Read-create

A string which is the description of the test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.1.1.4

nqaAdminCtrlType

NQAType

Read-create

The type of the test instance.

Currently, the following test types are supported: dns, ftp, http, icmp, icmpjitter, jitter, lspjitter, lspping, lsptrace, macping, mtrace, pwe3ping, pwe3trace, snmp, tcp, trace, and udp.

1.3.6.1.4.1.2011.5.25.111.2.1.1.5

nqaAdminCtrlFrequency

Integer32

Read-create

The value of this object identifies the frequency of performing test instances. The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.1.1.6

nqaAdminCtrlTimeOut

Integer32 (1..60)

Read-create

Specifies the duration to wait for the completion of test instance. The default value of DHCP-type and FTP-type test instance is 15s, the default value of PPPoE-type test instance is 30s, and that of other types is 3s.

The PPPoE type is not supported currently.

1.3.6.1.4.1.2011.5.25.111.2.1.1.7

nqaAdminCtrlThreshold1

Integer32

Read-create

The value of this object identifies the round-trip delay (RTD) threshold.It applies to any type of test instance. The default value is 0. The default value is 0.

Currently, the value ranges from 0 to 60000 can be set.

1.3.6.1.4.1.2011.5.25.111.2.1.1.8

nqaAdminCtrlThreshold2

Integer32

Read-create

The value of this object identifies the one-way delay (OWD) threshold of the packet transmitted from the source to the destination.It applies only to jitter-type test instances. The default value is 0.

Currently, the value ranges from 0 to 60000 can be set.

1.3.6.1.4.1.2011.5.25.111.2.1.1.9

nqaAdminCtrlThreshold3

Integer32

Read-create

The value of this object identifies the OWD threshold of the packet transmitted from the destination to the source.It applies only to jitter-type test instances. The default value is 0.

Currently, the value ranges from 0 to 60000 can be set.

1.3.6.1.4.1.2011.5.25.111.2.1.1.10

nqaAdminCtrlStatus

RowStatus

Read-create

This object indicates the status of the row.

The value can be set to 'CreateAndGo (4)','Destroy (6)' and 'Active (1)'.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName indexes must be specified. The ASCII values of the indexes must be greater than 32 and less than or equal to 126. In addition, the ASCII value cannot be 63 or 45.

  • The ASCII values for non-index character strings must be greater than 32 and less than or equal to 126. In addition, the ASCII value cannot be 63.

  • During the creation of a test instance, the value of nqaAdminCtrlStatus must be CreateAndGo(4).

Modification Restriction

  • nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName must be specified.

  • The test instance cannot be modified when it starts. To modify the test instance, you must stop it first.

  • Modifying single objects is supported.

  • When the type of the test instance is modified, the test instance is initialized and relevant test records are deleted.

  • If the object to be modified contains the nqaAdminCtrlStatus object, it can be modified only when the value of nqaAdminCtrlStatus is active (1).

  • If the value of nqaGroupStatusType in nqaGroupTable of a test instance is member(2), that is, if the test instance is a group member, you cannot modify the values of nqaAdminCtrlType, nqaAdminCtrlFrequency or nqaAdminCtrlTimeOut.

Deletion Restriction

  • When this table is deleted, entries related to this table in other tables (such as the nqaAdminParaTable and nqaScheduleTable) are deleted simultaneously.

  • Deleting a running test instance is not allowed. To delete the running test instance, you must stop this test instance first. Deleting all test instances is an exception.

  • The entries in this table can be deleted only when the value of nqaAdminCtrlStatus is Destroy(6).

  • If the value of nqaGroupStatusType in nqaGroupTable is member(2), that is, if the test instance is a group member, you cannot delete this test instance. To delete this test instance, you need to release it from its group in nqaGroupTable.

  • If the value of nqaGroupStatusType for a test instance is leader(1) in nqaGroupTable, that is, if the test instance is a group leader, and if the value of nqaGroupMemberNum is not 0 in nqaGroupTable, you cannot delete this test instance. To delete this instance, you need to release all the members in the group.

Access Restriction

  • You can query information about objects no matter whether the index of the object is specified.

  • nqaAdminCtrlStatus of the entry must be active(1).

nqaAdminParaTable

nqaAdminParaTable is used to configure parameters of a test instance.

The indexes of this table are nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.2.2.1.1

nqaAdminParaTargetAddressType

InetAddressType

Read-write

This object indicates the destination address type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.2

nqaAdminParaTargetAddress

InetAddress

Read-write

This object indicates the destination address.

Currently, the value ranges from 0 to 100 can be set.

1.3.6.1.4.1.2011.5.25.111.2.2.1.3

nqaAdminParaTargetPort

InetPortNumber

Read-write

This object indicates the destination port number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.4

nqaAdminParaSourceAddressType

InetAddressType

Read-write

This object indicates the source address type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.5

nqaAdminParaSourceAddress

InetAddress

Read-write

This object indicates the source address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.6

nqaAdminParaSourcePort

InetPortNumber

Read-write

This object indicates the source port number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.7

nqaAdminParaMaxTtl

Unsigned32{(0..255)}

Read-write

This object indicates the maximum TTL value.

The value cannot be set to 0 unless the test type is PWE3 ping, the LSP version is RFC 4379, and the TTL propagation mode is pipe.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.8

nqaAdminParaInitialTtl

Unsigned32{(1..255)}

Read-write

This object indicates the initial TTL value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.10

nqaAdminParaMaxFailures

Unsigned32{(1..255)}

Read-write

This object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. Value 255 (maximum hop count/possible TTL value) indicates that the function of terminating a remote traceroute request when a specific number of successive timeouts are detected is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.11

nqaAdminParaDontFragment

TruthValue

Read-write

This object indicates that the setting of Don't Fragment (DF) flag in the IP header for a probe is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.12

nqaAdminParaDataSize

Unsigned32

Read-write

The value of this object identifies the size of data field in packet.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.13

nqaAdminParaDataFill

OCTET STRING

Read-write

This object indicates the characters used for filling the data field.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.14

nqaAdminParaIfIndex

InterfaceIndexOrZero

Read-write

This object indicates the interface index. The value zero implies that the object is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.15

nqaAdminParaByPassRouteTable

TruthValue

Read-write

This object indicates whether bypassing the routing table is enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.17

nqaAdminParaProbeCount

Unsigned32{(1..15)}

Read-write

This object indicates the number of packets sent by the test instance or number of repeated probes. The number of repeated probes applies only to jitter test instances.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.18

nqaAdminParaTrapGeneration

BITS

{

  • probeFailure(0)
  • testFailure(1)
  • testCompletion(2)
  • overRtdThreshold(3)
  • overOwdThresholdSd(4)
  • overOwdThresholdDs(5)

}

Read-write

This object indicates whether the trap function is enabled for the test instance. Multiple options for this object can be delivered together. If configurations are repeatedly delivered, newly delivered configurations overwrite previous configurations.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.19

nqaAdminParaTrapProbeFailureFilter

Unsigned32{(1..15)}

Read-write

This object indicates the number of packets during consecutive test instance failures.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.20

nqaAdminParaTrapTestFailureFilter

Unsigned32{(1..15)}

Read-write

This object indicates the number of consecutive test instance failures.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.21

nqaAdminParaDSField

Integer32{(0..255)}

Read-write

The value of this object identifies the Differentiated Services (DS) field.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.22

nqaAdminParaDnsServerAddressType

InetAddress

Read-write

This object indicates the address type of a DNS server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.23

nqaAdminParaDnsServerAddress

InetAddress

Read-write

This object indicates the address of a DNS server.

Currently, the value ranges from 0 to 230 can be set.

1.3.6.1.4.1.2011.5.25.111.2.2.1.24

nqaAdminParaOperation

NQAOperation

Read-write

This object indicates the operation of FTP or HTTP type test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.25

nqaAdminParaHttpVersion

DisplayString

Read-write

This object indicates the HTTP version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.26

nqaAdminParaHttpOperationString

DisplayString

Read-write

This object indicates the relative path name (used by HTTP).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.27

nqaAdminParaTestFailurePercent

Unsigned32{(0..100)}

Read-write

This object indicates the percentage of the number of failed test instances to the total number of test instances.

Currently, the value ranges from 0 to 100 can be set. The default value is 100.

1.3.6.1.4.1.2011.5.25.111.2.2.1.28

nqaAdminParaFtpUserName

DisplayString

Read-write

This object indicates the user name of an FTP server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.29

nqaAdminParaFtpPassword

DisplayString

Read-write

This object indicates the password of the user of the FTP server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.30

nqaAdminParaFtpFilePath

DisplayString

Read-write

This object indicates the file name and file path used by FTP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.31

nqaAdminParaFtpFileSize

Integer32{(0..10000)}

Read-write

The value of this object identifies the size that the file will be transmitted by an FTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.32

nqaAdminParaInterval

Integer32{(0..60000)}

Read-write

The value of this object identifies the interval between two consecutive probe packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.33

nqaAdminParaNumPackets

Integer32

Read-write

The value of this object identifies the number of packets sent in each probe, only apples to jitter test instances.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.34

nqaAdminParaVrfName

DisplayString

Read-write

This object indicates the VRF name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.35

nqaAdminParaLspAddressType

INTEGER

{

  • ipv4(1)
  • te(3)
  • ipv4vpn(6)
  • bgp(12)
  • ring(100)

}

Read-write

The value of this object identifies the address type of LSP. The object applies to LSP ping, LSP trace, and LSP jitter test instances.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.36

nqaAdminParaLspAddressMask

Integer32

Read-write

The value of this object identifies the LSP address mask. The object apples to LSP ping and trace test instances.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.37

nqaAdminParaLspIpAddress

InetAddress

Read-write

This object indicates the IP address filled in the IP header, which must be a 127/8 address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.38

nqaAdminParaLspPWE3VcId

Unsigned32

Read-write

The value of this object identifies the local pseudo wire ID in PWE3 ping and PWE3 trace tests.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.39

nqaAdminParaLspPWE3Type

INTEGER

{

  • fr(1)
  • atmAal5Sdu(2)
  • atm-cell-transport(3)
  • vlan(4)
  • ethernet(5)
  • hdlc(6)
  • ppp(7)
  • atm-nto1-vcc(9)
  • atm-nto1-vpc(10)
  • ip-layer2(11)
  • atm-1to1-vcc(12)
  • atm-1to1-vpc(13)
  • satop-e1(17)
  • satop-t1(18)
  • satop-e3(19)
  • cesopsn-basic(21)
  • ipInterworking(64)

}

Read-write

The value of this object identifies the encapsulation type of a pseudo wire in the PWE3 ping and PWE3 trace tests.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.40

nqaAdminParaLspPWE3Option

INTEGER

{

  • labelAlert(1)
  • controlWord(2)
  • normal(3)

}

Read-write

The value of this object identifies the label type of PWE3 ping and tracert.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.41

nqaAdminParaLspPWE3RemoteVcId

Unsigned32

Read-write

This object indicates the remote pseudo wire ID in a PWE3 ping test.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.43

nqaAdminParaLspExp

Unsigned32{(0..7)}

Read-write

This object indicates the 3-bit EXP field in an MPLS echo packet label.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.44

nqaAdminParaLspReplyMode

INTEGER

{

  • noReply(1)
  • udp(2)
  • udpRouterAlert(3)
  • levelControlChannel(4)
  • udpviaVPLS(5)

}

Read-write

The value of this object identifies the ReplyMode field in an MPLS echo packet.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.45

nqaAdminParaResultRowMax

Integer32

Read-write

The value of this object identifies the maximum number of test instance result records.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.46

nqaAdminParaHistoryRowMax

Integer32

Read-write

The value of this object identifies the maximum number of history records on each test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.47

nqaAdminParaCreateHopsEntries

EnableValue

Read-write

This object indicates a traceroute path. The object applies to trace, PWE3 trace, LSP trace, and MTrace test instances.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.48

nqaAdminParaLspVCType

INTEGER

{

  • ldp(1)
  • bgp(2)
  • bgpad(3)

}

Read-write

The value of this object identifies the type of protocol which establishes PWs in a PWE3 tracert test.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.49

nqaAdminParaMTraceLastHopAddress

InetAddress

Read-write

This object indicates the last hop device's IP address in an MTrace test.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.50

nqaAdminParaMTraceSourceAddress

InetAddress

Read-write

This object indicates the IP address of the multicast source for a path to be traced in an MTrace test.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.51

nqaAdminParaMTraceGroupAddress

InetAddress

Read-write

This object indicates the group address to be traced in an MTrace test, or the group address of all zeros if no group-specific information is desired.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.52

nqaAdminParaMTraceMaxTtl

Unsigned32 (1..65535)

Read-write

The value of this object identifies the maximum number of hops that the requester wants to trace in an MTrace test.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.53

nqaAdminParaMTraceSendMode

INTEGER

{

  • multicastTree(1)
  • allRouter(2)
  • destination (3)
  • lastHop(4)

}

Read-write

The value of this object identifies the sending mode of Query messages in an MTrace test.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.54

nqaAdminParaMTraceResponseTtl

Unsigned32{(1..255)}

Read-write

This object indicates the TTL at which to multicast the response in an MTrace test, if the response address is a multicast address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.55

nqaAdminParaMTraceResponseAddressType

InetAddress

Read-write

This object indicates the MTrace response address type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.56

nqaAdminParaMTraceResponseAddress

InetAddress

Read-write

This object indicates where the completed traceroute response packet gets sent in MTrace test. It can be a unicast address or a multicast address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.57

nqaAdminParaDistanceNodeType

NqaDistanceNodeType

Read-write

This object indicates the destination (MAC address or RMEP ID) of a MAC ping test.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.58

nqaAdminParaMacAddress

MacAddress

Read-write

This object indicates the MAC address of the destination of a MAC ping test.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.60

nqaAdminParaMDName

OCTET STRING(SIZE(0..43))

Read-write

This object indicates the name of an MD in which a MAC ping is performed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.61

nqaAdminParaMAName

OCTET STRING(SIZE(0..45))

Read-write

This object indicates the name of an MA in which a MAC ping is performed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.65

nqaAdminParaIcmpJitterMode

INTEGER

{

  • icmpTimestamp(1)
  • icmpEcho(2)

}

Read-write

The value of this object identifies the type of ICMP packets to be sent in ICMP jitter and path jitter tests.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.66

nqaAdminParaCodecType

INTEGER

{

  • notDefined(1)
  • g711Alaw(2)
  • g711Ulaw(3)
  • g729A(4)

}

Read-write

TThe value of this object identifies the codec type to be used with jitter probe. This is only applicable for the jitter probe.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.67

nqaAdminParaIcpifAdvFactor

Integer32

Read-write

The value of this object identifies the factor used to calculate the ICPIF.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.78

nqaAdminParaLspTunnelType

INTEGER

{

  • main(0)
  • hotstandby(1)
  • primary(2)

}

Read-write

The value of this object identifies the tunnel type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.79

nqaAdminParaLspNextHopAddress

InetAddress

Read-write

This object indicates the next-hop address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.80

nqaAdminParaLspVersion

INTEGER

{

  • draft6(1)
  • rfc4379(2)
  • ptnmode(3)
  • compatiblemode(4)

}

Read-write

The value of this object identifies the LSP version of a protocol.

The default value is draft6(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.83

nqaAdminParaTimeUnit

INTEGER

{

  • us(1)
  • ms(2)

}

Read-write

The value of this object identifies the unit of timestamp, us or ms.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.84

nqaAdminParaProbeRate

Unsigned32

Read-write

This object indicates the rate at which an RTP test is sent, in bit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.85

nqaAdminParaLifeTime

Unsigned32

Read-write

This object indicates the time an NQA RTP test takes, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.86

nqaAdminParaProtocolType

ProtocolType

Read-write

This object indicates the protocol type of an NQA RTP test.

Currently, UDP and TCP are supported.

  • When the test type is RTP test or RTP snooping, the default value is udp(1).
  • When the test type is not RTP test or RTP snooping, the default value is unknown(0), which means unspecified or unused.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.87

nqaAdminParaSampleFrequency

Unsigned32

Read-write

The value of this object identifies the frequency ( in kHz) of an RTP snooping.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.88

nqaAdminParaPacketSize

Unsigned32

Read-write

This object indicates the size of an RTP test packet, in bytes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.89

nqaAdminParaPacketInterval

Unsigned32

Read-write

This object indicates the interval (in milliseconds) at which RTP test packets are sent.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.90

nqaAdminParaNextHopAddressType

InetAddressType

Read-write

This object indicates the type of a next hop address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.91

nqaAdminParaNextHopAddress

InetAddress

Read-write

This object indicates the next-hop address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.100

nqaAdminParaSnmpCommunityRead

OCTET STRING(SIZE(0..32))

Read-write

This object indicates the community name for SNMP test.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.2.1.111

nqaAdminParaLspVpnFrrPathType

INTEGER

{
  • main(0)
  • backup(1)
}

read-write

The value of this object identifies which LSP is tested on a BGP-based L3VPN or static MPLS IP VPN network.
  • main(0): The primary LSP on a BGP-based L3VPN or static MPLS IP VPN network is tested.
  • backup(1): The backup LSP on a static MPLS IP VPN network is tested.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

  • This table is generated after test instances are created through nqaAdminCtrlTable. Therefore, to modify this table, you must specify nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName.

  • The test instance cannot be modified when it is running. To modify the test instance, you must stop the test instance first.

  • If the value of nqaGroupStatusType in nqaGroupTable for a test instance is member(2), that is, if the test instance is a group member, you can only set the values of the following objects:

    • nqaAdminParaTargetAddressType

    • nqaAdminParaTargetAddress

    • nqaAdminParaTargetPort

    • nqaAdminParaSourceAddressType

    • nqaAdminParaSourceAddress

    • nqaAdminParaSourcePort

    • nqaAdminParaDataSize

    • nqaAdminParaIfIndex

  • If the value of nqaGroupStatusType in nqaGroupTable for a test instance is leader(1). If the test instance is a group leader, you cannot set the values of the following objects:

    • nqaAdminParaTargetAddressType

    • nqaAdminParaTargetAddress

    • nqaAdminParaTargetPort

    • nqaAdminParaSourceAddressType

    • nqaAdminParaSourceAddress

    • nqaAdminParaSourcePort

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaScheduleTable

nqaScheduleTable is the task scheduling table of the test instance. It is used to reduce the burden on devices when tests are performed concurrently and schedule the test instances. Test instance scheduling covers the following aspect:

  • Setting the start time of a test instance

  • Setting the end time of a test instance

  • Auto-delivering the start time and test interval when several tasks are started concurrently

The indexes of this table are nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.2.3.1.1

nqaScheduleStartType

INTEGER{

default(0),

startNow(1),

startAt(2),

startAfter(3),

startDaily(4)

}

Read-write

The value of this object identifies the start mode of a test instance.

The value default(0) can only be read but cannot be configured.

1.3.6.1.4.1.2011.5.25.111.2.3.1.2

nqaScheduleStartTime

Unsigned32

Read-write

This object indicates the start time of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.3.1.3

nqaScheduleEndType

INTEGER

  • default(0)
  • endAt(1)
  • endAfter(2)
  • endLifetime(3)

Read-write

The value of this object identifies the end mode of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.3.1.4

nqaScheduleEndTime

Unsigned32

Read-write

This object indicates the end time of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.3.1.5

nqaScheduleAgeTime

Integer32

Read-write

The value of this object identifies the aging time. Setting the value to 0 indicates reserving the test instance eternally.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.3.1.7

nqaScheduleNumOfInitiations

Integer32

Read-only

The value of this object identifies the number of times to start a test instance. This object is used as the index of the result table, HTTP statistics table, jitter statistics table, FTP statistics table and history table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.3.1.8

nqaScheduleLastFinishIndex

Integer32

Read-only

The value of this object identifies the index of the lately finished tests in nqaResultsTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.3.1.9

nqaScheduleOperStatus

INTEGER

  • reset(1)
  • stop(2)
  • restart(3)
  • active(4)
  • inactive(5)

Read-write

The value of this object identifies the status of the scheduling operation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.3.1.10

nqaScheduleLastCollectIndex

INTEGER

Read-only

The value of this object identifies the index of the collection table that is lately finished by the instance tests.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

  • When a test instance is in the inactive status, only read-create single objects can be modified.

  • The setting of nqaScheduleAgeTime needs to be delivered separately. This object cannot be bound with other scheduling objects to be delivered together with them. When a test instance is running, you cannot set nqaScheduleAgeTime. To set this object, you must stop the test instance first.

  • The setting of nqaScheduleOperStatus needs to be deployed separately. This object cannot be bound with other scheduling objects to be delivered together with them. When the value of this object is active(4) or inactive(5), the value cannot be set. To reset this object, you must stop the running test instance first. You can set the object to the value stop(2) or restart(3) no matter whether the test is running or not.

  • Objects nqaScheduleStartType, nqaScheduleStartTime, nqaScheduleEndType, and nqaScheduleEndTime in the scheduling table can be delivered together (The end mode objects must be delivered together with the start mode objects). You cannot set the preceding objects when the test instance is running. To set these objects, you must stop the test instance first.

  • When the start mode is startNow(1), the value must be 0. The end mode has four values: When the end mode is endAt(1), the value must be longer than the time (the seconds from 1970 to now) plus five seconds; when the end mode is endAfter(2) or endLifetime(3), the value must be less than 86400 but five seconds longer than the start time; the fourth value is default(0).

  • When the start mode is startAt(2), the value must not be shorter than the time (the seconds from 1970 to now) plus five seconds. The end mode has four values: When the end mode is endAt(1), the value must be five seconds longer the start time; when the end mode is endAfter(2), the end time must be less than 86400 but longer than the offset between the value start time plus five seconds and the seconds from 1970 to now; when the end mode is endLifetime(3), the value must be less than 86400 but five seconds longer than the start time; the fourth value is default(0).

  • When the start mode is startAfter(3), the value must range from 0 (longer than 0) to 86400. The end mode has four values: When the end mode is endAt(1), the value must longer than the sum of start time plus five seconds and the seconds from 1970 to now; when the end mode is endAfter(2), the value must be shorter than 86400 but longer than the start time plus five seconds; when the end mode is endLifetime(3), the value must be less than 86400 but five minutes longer than the start time; the fourth value is default(0).

  • If the value of nqaGroupStatusType in nqaGroupTable for a test instance is member(2), that is, if the test instance is a group member, you cannot set the following objects:

    • nqaScheduleStartType

    • nqaScheduleStartTime

    • nqaScheduleEndType

    • nqaScheduleEndTime

  • That is, a group member cannot be scheduled. You cannot set the value of nqaScheduleOperStatus as restart(3) or set nqaScheduleAgeTime.

  • If the value of nqaGroupStatusType in nqaGroupTable for a test instance is leader(1), that is, if the test instance is a group leader, you cannot set the value of nqaScheduleOperStatus as restart(3) or set nqaScheduleAgeTime.

  • To start a test instance, you must configure all the mandatory parameters.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaAdminParaExtTable

The indexes of this table are nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName.

Objects in this table are used in pairs. In each pair, one object is a read-only string and will be filled up after the test instance type is specified. Its value identifies the meanings and value range of the other object. The other object in the pair indicates NQA parameters, whose meanings and value ranges vary with test instances. The type of a test instance is specified by the object in the string form. The first 15 paired objects are numerical parameters and the last 15 paired objects are character string parameters.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.2.5.1.1

nqaAdminExtPara1

OctetString

Read-only

This object indicates the description of nqaAdminExtPara2. After the test instance type is specified, the system automatically assigns the object value.

If NQA test type is lspping or lsptrace, then the string is: Specify the destination node id parameter between 0 and 127.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.5.1.2

nqaAdminExtPara2

Integer32

Read-write

This object indicates NQA parameters that can be configured. After the test instance type is specified, the value and meanings of this object are defined in nqaAdminExtPara1.

The object values have different meanings for different NQA test instance types.

  • For an NQA VPLS PW trace test instance, the object value indicates whether all devices along LSP, including Ps, are displayed.
    • 1: All devices along LSP, including Ps, are displayed.
    • 2: All devices along LSP, except Ps, are displayed.
  • For an NQA PWE3 ping or PWE3 trace test instance, the object value indicates whether the control word function is disabled.
    • 1: The control word function is disabled.
    • 2: The control word function is enabled.
    The default value is 2.
  • For an NQA ICMP test instance, the object value indicates whether the specified request packets are forwarded through an IP network.
    • 0: The specified request packets are not forwarded through an IP network.
    • 1: The specified request packets are forwarded through an IP network.
  • For an NQA jitter or ICMP jitter test instance, the object value indicates whether the packet-rewrite-check function is enabled.
    • 0: The packet-rewrite-check function is enabled.
    • 1: The alternant-binary is specified (bits 0101 and 1010 are alternatively padded into test packets).
    • 2: The same-binary is specified (full 0s and full 1s are alternatively padded into test packets).
  • For an NQA LSP ping or LSP trace test instance, the object value indicates the sink node ID, ranging from 0 to 127.

1.3.6.1.4.1.2011.5.25.111.2.5.1.3

nqaAdminExtPara3

OctetString

Read-only

This object indicates the description of nqaAdminExtPara4. After the test instance type is specified, the system automatically assigns the object value.

If NQA test type is lspping or lsptrace, then the string is: Specify the direction parameter, default is 0, means undo this parameter, 1 means east, 2 means west.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.5.1.4

nqaAdminExtPara4

Integer32

Read-write

This object indicates NQA parameters that can be configured. After the test instance type is specified, the value and meanings of this object are defined in nqaAdminExtPara3.

The object values have different meanings for different NQA test instance types.

  • For an NQA PWE3 ping or PWE3 trace test instance, the object value indicates the TTL copy mode.
    • 0: The TTL copy mode is unknown.
    • 1: The TTL copy mode is pipe.
    • 2: The TTL copy mode is uniform.
    The default TTL copy mode is unknown, indicating that the system determines the copy mode.
  • For an NQA LSP ping or LSP trace test instance, the object value indicates the test direction.
    • 0: No test direction is set.
    • 1; The test instance is performed in east direction.
    • 2: The test instance is performed in west direction.
    The default value is 0.

1.3.6.1.4.1.2011.5.25.111.2.5.1.5

nqaAdminExtPara5

OctetString

Read-only

This object indicates the description of nqaAdminExtPara6. After the test instance type is specified, the system automatically assigns the object value.

If NQA test type is lspping or lsptrace, then the string is: Specify the ring id parameter between 0 and 65535.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.5.1.6

nqaAdminExtPara6

Integer32

Read-write

This object indicates NQA parameters that can be configured.

After the test instance type is specified, the value and meanings of this object are defined in nqaAdminExtPara5.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.5.1.31

nqaAdminExtPara31

OctetString

read-only

This object indicates the description of the nqaAdminExtPara32 object.

The value is automatically assigned by the system after the type of the test case is ascertained.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.2.5.1.32

nqaAdminExtPara32

OctetString

read-write

This object is a configurable NQA parameter object.

Its value and meaning are assigned by the nqaAdminExtPara31 object after the test case is ascertained.

The supported NQA test type is pwe3ping.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaTcpServerTable

This table is used to configure the NQA TCP service of the servers, including protocols, IP addresses, port numbers, and VRF.

The indexes of this table are nqaTcpServerAddress, nqaTcpServerPort, and nqaTcpServerVrfName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.3.2.1.1

nqaTcpServerAddressType

InetAddressType

Read-create

This object indicates the address type of TCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.3.2.1.2

nqaTcpServerAddress

InetAddress

Not-accessible

This object indicates the IP address of TCPserver.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.3.2.1.3

nqaTcpServerPort

InetPortNumber

Not-accessible

This object indicates the port number of TCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.3.2.1.4

nqaTcpServerVrfName

DisplayString(SIZE(1..31))

Not-accessible

Specifies the VRF (VPN Routing & Forwarding) instances name of the TCP server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.3.2.1.5

nqaTcpServerStatus

RowStatus

Read-create

Specifies the operation of the TCP server, creating or deleting.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • To create entries in this table, you must designate the indexes: nqaTcpServerAddress, nqaTcpServerPort, and nqaTcpServerVrfName.

  • The value of nqaTcpServerAddressType must be IPv4(1), and the value of nqaTcpServerStatus must be CreateAndGo(4).

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

  • The indexes must be specified.

  • The value of nqaTcpServerStatus must be Destroy (6).

Access Restriction

  • You can query information about objects no matter whether the index of the object is specified.

  • nqaTcpServerStatus of the entry must be active(1) or notInService(2).

nqaUdpServerTable

This table is used to configure the NQA UDP service of the servers, including: protocols, IP addresses, port numbers, and VRF.

The indexes of this table are nqaUdpServerAddress, nqaUdpServerPort, and nqaUdpServerVrfName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.3.3.1.1

nqaUdpServerAddressType

InetAddressType

Read-create

This object indicates the address type of the server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.3.3.1.2

nqaUdpServerAddress

InetAddress

Not-accessible

This object indicates the IP address of the server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.3.3.1.3

nqaUdpServerPort

InetPortNumber

Not-accessible

This object indicates the port number of the server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.3.3.1.4

nqaUdpServerVrfName

DisplayString(SIZE(1..31))

Not-accessible

This object indicates the VRF name.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.3.3.1.5

nqaUdpServerStatus

RowStatus

Read-create

This object indicates the row status, creating or deleting.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • To create entries in this table, you must designate the indexes nqaUdpServerAddress, nqaUdpServerPort, and nqaUdpServerVrfName.

  • The value of nqaUdpServerAddressType must be ipv4(1).

  • The value of nqaUdpServerStatus must be CreateAndGo (4).

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

  • The indexes must be specified.

  • The value of nqaUdpServerStatus must be Destroy (6).

Access Restriction

  • You can query information about objects no matter whether the index of the object is specified.

  • nqaUdpServerStatus of the entry must be active(1) or notInService(2).

nqaResultsTable

This table is used to take statistics of the test result of a test instance. It describes the general test information of a certain test instance.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaResultsIndex, and nqaResultsHopIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.1.1.1

nqaResultsIndex

Integer32 (0..'7FFFFFFF'h)

Not-accessible

The value of this object specifies the result table index and times of dispatching dependency tests. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.2

nqaResultsHopIndex

Integer32 (0..255)

Not-accessible

The value of this object specifies the hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.3

nqaResultsCompletions

INTEGER

  • noResult(0)
  • success(1)
  • failure(2)

Read-only

The value of this object specifies the status of test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.4

nqaResultsTestAttempts

Counter32

Read-only

The value of this object specifies the times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The value of this object MUST be started at 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.5

nqaResultsCurHopCount

Gauge32

Read-only

It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.6

nqaResultsCurProbeCount

Gauge32

Read-only

The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.7

nqaResultsRTDOverThresholds

Counter32

Read-only

The value of this object specifies the times of successful statistics test RTD (Round Trip Delay) over the threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.8

nqaResultsSumCompletionTime

Counter32

Read-only

The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp ping and disman-ping tests and so on.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.9

nqaResultsSumCompletionTime2Low

Counter32

Read-only

The value of this object specifies the low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.10

nqaResultsSumCompletionTime2High

Counter32

Read-only

The value of this object specifies the high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.11

nqaResultsCompletionTimeMin

Gauge32

Read-only

The value of this object specifies the minimum RTT of all packets for executing a test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.12

nqaResultsCompletionTimeMax

Gauge32

Read-only

The value of this object specifies the maximum RTT of all packets in executing a test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.13

nqaResultsDisconnects

Counter32

Read-only

The times of consecutive failures. For connectionless protocol type of test, this number should be zero.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.14

nqaResultsTimeouts

Counter32

Read-only

The value of this object specifies the number of occasions when an NQA operation is not completed before a timeout occurs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.15

nqaResultsBusies

Counter32

Read-only

The value of this object specifies the times of failure to apply resource due to the busy system. such as apply memory or create socket failure.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.16

nqaResultsNoConnections

Counter32

Read-only

The value of this object specifies the number of occasions when an NQA operation could not be initiated because the connection to the target has not been established.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.17

nqaResultsSequenceErrors

Counter32

Read-only

The value of this object specifies the number of NQA operation completions received with an unexpected sequence identifier.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.18

nqaResultsDrops

Counter32

Read-only

The value of this object specifies the times probes of the test dropped due to sending or connecting failure.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.19

nqaResultsAddressType

InetAddress

Read-only

The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.20

nqaResultsAddress

InetAddress

Read-only

The value of this object specifies the destination address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.21

nqaResultsProbeResponses

Counter32

Read-only

The value of this object specifies the number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.22

nqaResultsSentProbes

Counter32

Read-only

This object indicates the number of probes currently sent. The value of this object MUST be reported as 0 when no probes have been sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.23

nqaResultsLastGoodProbe

DateAndTime

Read-only

This object indicates the time when the last successful probe response is received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.24

nqaResultsLastGoodPath

DateAndTime

Read-only

This object indicates the time when the last complete traceroute path is obtained.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.25

nqaResultsTestFinished

INTEGER

  • noFinish(0)
  • finish(1)

Read-only

The value of this object identifies the status of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.26

nqaResultsRttAvg

Gauge32

Read-Only

The value of this object identifies the average RTT

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.27

nqaResultsLostPacketRatio

Gauge32

Read-Only

The value of this object identifies the packet loss ratio.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.30

nqaResultsDetail

Unsigned32

read-only

This object indicates test instance details.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The latest test results can be displayed only when all the following conditions are met:
  • A get operation is performed.
  • The test instance type is ICMP, UDP, or TCP.
  • The values of nqaResultsIndex and nqaResultsHopIndex are 0.

nqaHTTPStatsTable

This table is used to collect the network status information probed through the HTTP protocol. It contains the average statistics about probes.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, and nqaHTTPStatsIndex. Among the three indexes, the former two indexes are external indexes.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.2.1.1

nqaHTTPStatsIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

The value of this object identifies the index of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.2

nqaHTTPStatsCompletions

INTEGER

  • noResult(0)
  • success(1)
  • failure(2)

Read-only

The status of HTTP test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.3

nqaHTTPStatsRTDOverThresholds

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed the test but exceeds the RTD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.4

nqaHTTPStatsRTTSum

Counter32

Read-only

The sum of delay time of successful HTTP probes, including the sum of time of DNS query, TCP establishment and packets transmission.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.5

nqaHTTPStatsRTTMin

Gauge32

Read-only

This object indicates the minimum RTT of an HTTP probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.6

nqaHTTPStatsRTTMax

Gauge32

Read-only

This object indicates the maximum RTT of an HTTP probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.7

nqaHTTPStatsDNSRTTSum

Counter32

Read-only

This object indicates the RTT sum of DNS resolution.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.8

nqaHTTPStatsDNSRTTMin

Gauge32

Read-only

This object indicates the minimum RTT of DNS resolution.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.9

nqaHTTPStatsDNSRTTMax

Gauge32

Read-only

This object indicates the maximum RTT of DNS resolution.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.10

nqaHTTPStatsTCPConnectRTTSum

Counter32

Read-only

This object indicates the total time to establish TCP connections.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.11

nqaHTTPStatsTCPConnectRTTMin

Gauge32

Read-only

This object indicates the minimum time to establish a TCP connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.12

nqaHTTPStatsTCPConnectRTTMax

Gauge32

Read-only

This object indicates the maximum time to establish a TCP connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.13

nqaHTTPStatsTransactionRTTSum

Counter32

Read-only

This object indicates the total HTTP transaction time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.14

nqaHTTPStatsTransactionRTTMin

Gauge32

Read-only

This object indicates the minimum HTTP transaction time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.15

nqaHTTPStatsTransactionRTTMax

Gauge32

Read-only

This object indicates the maximum HTTP transaction time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.16

nqaHTTPStatsMessageBodyOctetsSum

Counter32

Read-only

This object indicates the sum of transmitted data bytes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.17

nqaHTTPStatsDNSServerTimeouts

Counter32

Read-only

This object indicates the number of times when a DNS resolution times out.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.18

nqaHTTPStatsTCPConnectTimeouts

Counter32

Read-only

This object indicates the number of times when a TCP connection times out.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.19

nqaHTTPStatsTransactionTimeouts

Counter32

Read-only

This object indicates the number of times when HTTP data transmission times out.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.20

nqaHTTPStatsDNSQueryErrors

Counter32

Read-only

This object indicates the number of times when DNS resolution fails.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.21

nqaHTTPStatsErrors

Counter32

Read-only

This object indicates the number of errors occurring at the HTTP transaction stage.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.22

nqaHTTPStatsTcpConnErrors

Counter32

Read-only

This object indicates the number of TCP connection errors.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.23

nqaHTTPStatsProbeResponses

Counter32

Read-only

This object indicates the number of successful probes. The value of this object MUST be reported as 0 when no probe responses have been received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.24

nqaHTTPStatsSendProbes

Counter32

Read-only

This object indicates the number of originated probes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.25

nqaHTTPStatsBusies

Counter32

Read-only

This object indicates the number of initialization or resource application failures.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.26

nqaHTTPStatsTestFinished

INTEGER

  • noFinish(0)
  • finish(1)

Read-only

The value of this object identifies the status of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.27

nqaHTTPStatsRttAvg

Gauge32

Read-Only

The average of RTTs that were successfully measured by tests.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.2.1.28

nqaHTTPStatsLostPacketRatio

Gauge32

Read-only

The ratio of the packets lost to all packets sent in the test.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaJitterStatsTable

This table is used to test network status by sending packets. By taking multiple statistics, it calculates the jitter value of network time delay.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, and nqaJitterStatsIndex. Among the three indexes, the former two indexes are external indexes.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.3.1.1

nqaJitterStatsIndex

Integer32 (0..'7FFFFFFF'h)

Not-accessible

This object indicates the index of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.2

nqaJitterStatsCompletions

INTEGER

  • noResult(0)
  • success(1)
  • failure(2)
  • negotiateFailed(3)

Read-only

This object indicates the operating status of a test instance. If the test is still running, the value will be noResult (0).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.3

nqaJitterStatsRTDOverThresholds

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed but exceeds the RTD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.4

nqaJitterStatsNumOfRTT

Counter32

Read-only

This object indicates the number of times when a response is received and the RTT is successfully calculated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.5

nqaJitterStatsRTTSum

Counter32

Read-only

This object indicates the sum of RTT of all the received packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.6

nqaJitterStatsRTTSum2Low

Counter32

Read-only

This object indicates the low 32-bit of the RTT square sum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.7

nqaJitterStatsRTTSum2High

Counter32

Read-only

This object indicates the high 32-bit of the RTT square sum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.8

nqaJitterStatsRTTMin

Gauge32

Read-only

This object indicates the minimum RTT value of the packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.9

nqaJitterStatsRTTMax

Gauge32

Read-only

This object indicates the maximum RTT value of the packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.10

nqaJitterStatsMinOfPositivesSD

Gauge32

Read-only

This object indicates the minimum positive jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.11

nqaJitterStatsMaxOfPositivesSD

Gauge32

Read-only

This object indicates the maximum positive jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.12

nqaJitterStatsNumOfPositivesSD

Counter32

Read-only

This object indicates the number of positive jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.13

nqaJitterStatsSumOfPositivesSD

Counter32

Read-only

This object indicates the sum of positive jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.14

nqaJitterStatsSum2OfPositivesSDLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the positive jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.15

nqaJitterStatsSum2OfPositivesSDHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the positive jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.16

nqaJitterStatsMinOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.17

nqaJitterStatsMaxOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.18

nqaJitterStatsNumOfNegativesSD

Counter32

Read-only

This object indicates the number of negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.19

nqaJitterStatsSumOfNegativesSD

Counter32

Read-only

This object indicates the absolute value sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.20

nqaJitterStatsSum2OfNegativesSDLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.21

nqaJitterStatsSum2OfNegativesSDHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.22

nqaJitterStatsMinOfPositivesDS

Gauge32

Read-only

This object indicates the minimum positive jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.23

nqaJitterStatsMaxOfPositivesDS

Gauge32

Read-only

This object indicates the maximum positive jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.24

nqaJitterStatsNumOfPositivesDS

Counter32

Read-only

This object indicates the number of positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.25

nqaJitterStatsSumOfPositivesDS

Counter32

Read-only

This object indicates the sum of positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.26

nqaJitterStatsSum2OfPositivesDSLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.27

nqaJitterStatsSum2OfPositivesDSHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.28

nqaJitterStatsMinOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.29

nqaJitterStatsMaxOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.30

nqaJitterStatsNumOfNegativesDS

Counter32

Read-only

This object indicates the number of negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.31

nqaJitterStatsSumOfNegativesDS

Counter32

Read-only

This object indicates the absolute value sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.32

nqaJitterStatsSum2OfNegativesDSLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.33

nqaJitterStatsSum2OfNegativesDSHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.34

nqaJitterStatsPacketLossSD

Counter32

Read-only

This object indicates the number of lost packets among the packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.35

nqaJitterStatsPacketLossDS

Counter32

Read-only

This object indicates the number of lost packets among the packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.36

nqaJitterStatsPacketOutOfSequences

Counter32

Read-only

This object indicates the number of packets with error sequence numbers received in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.37

nqaJitterStatsErrors

Counter32

Read-only

This object indicates errors not represented by other objects in this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.38

nqaJitterStatsBusies

Counter32

Read-only

This object indicates the number of initialization or resource application failures.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.39

nqaJitterStatsTimeouts

Counter32

Read-only

This object indicates the number of time-out packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.40

nqaJitterStatsProbeResponses

Counter32

Read-only

This object indicates the number of data packets to which responses have been received in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.41

nqaJitterStatsSentProbes

Counter32

Read-only

This object indicates the number of data packets sent in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.42

nqaJitterStatsDrops

Counter32

Read-only

This object indicates the number of data packets discarded owing to sending failure in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.43

nqaJitterStatsTestFinished

INTEGER

  • noFinish(0)
  • finish(1)

Read-only

This object indicates the status of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.44

nqaJitterStatsMaxDelaySD

Gauge32

Read-only

This object indicates the maximum time delay from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.45

nqaJitterStatsMaxDelayDS

Gauge32

Read-only

This object indicates the maximum time delay from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.46

nqaJitterStatsRTTAvg

Gauge32

Read-only

This object indicates the average RTT.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.47

nqaJitterStatsPacketLossRatio

Gauge32

Read-only

This object indicates the packet loss rate in a jitter test.

For jitter and ICMP jitter test instances, when the value of nqaJitterStatsSentProbes is 0, the packet loss rate is 100%.

1.3.6.1.4.1.2011.5.25.111.4.3.1.48

nqaJitterStatsAvgJitter

Gauge32

Read-only

This object indicates the average jitter value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.49

nqaJitterStatsAvgJitterSD

Gauge32

read-only

This object indicates the average jitter value from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.50

nqaJitterStatsAvgJitterDS

Gauge32

read-only

This object indicates the average jitter value from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.51

nqaJitterStatsJitterOut

OCTET STRING

Read-only

This object indicates the jitter values in sending packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.52

nqaJitterStatsJitterIn

OCTET STRING

Read-only

This object indicates the jitter values in receiving packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.53

nqaJitterStatsOWDOverThresholdsSD

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed and the packet delay from the source to the destination exceeds the OWD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.54

nqaJitterStatsPktLossUnknown

Counter32

Read-only

This object indicates the number of packets lost at an unknown direction in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.55

nqaJitterStatsNumOfOWD

Counter32

Read-only

This object indicates the number of sent packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.56

nqaJitterStatsOWSumSD

Counter32

Read-only

This object indicates the total number of OWDs from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.57

nqaJitterStatsOWSumDS

Counter32

Read-only

This object indicates the total number of OWDs from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.58

nqaJitterStatsOWDOverThresholdsDS

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed but the packet delay from the source to the destination exceeds the OWD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.59

nqaJitterStatsOperOfIcpif

Gauge32

read-only

This object indicates the ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.59

nqaJitterStatsOperOfIcpif

Gauge32

read-only

This object indicates the ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.60

nqaJitterStatsOperOfMos

Gauge32

read-only

This object indicates the MOS (Mean Opinion Score) value for the latest jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.61

nqaJitterStatsMinDelaySD

Gauge32

Read-only

This object indicates the minimum delay from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.62

nqaJitterStatsSum2DelaySDLow

Gauge32

Read-only

This object indicates the low order 32 bits of the sum of squares of one way time from source to destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.63

nqaJitterStatsSum2DelaySDHigh

Counter32

Read-only

This object indicates the high order 32 bits of the sum of squares of one way time from source to destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.64

nqaJitterStatsMinDelayDS

Gauge32

Read-only

This object indicates the minimum OWD from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.65

nqaJitterStatsSum2DelayDSLow

Gauge32

Read-only

This object indicates the low order 32 bits of the sum of squares of one way time from destination to source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.66

nqaJitterStatsSum2DelayDSHigh

Counter32

Read-only

This object indicates the high order 32 bits of the sum of squares of one way time from destination to source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.67

nqaJitterStatsTimeUnit

INTEGER
  • us(1)
  • ms(2)

Read-only

This object indicates the unit of the timestamp, which can be us(1) or ms(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.68

nqaJitterStatsAvgDelaySD

Gauge32

Read-only

This object indicates the average OWD from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.69

nqaJitterStatsAvgDelayDS

Gauge32

Read-only

This object indicates the average OWD from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.79

nqaJitterStatsStartTime Unsigned32

read-only

This object indicates the time when the Jitter test started.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.80

nqaJitterStatsEndTime Unsigned32

read-only

This object indicates the time when the Jitter test ended.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.81

nqaJitterStatsResultDetail Unsigned32

read-only

This object indicates test instance details.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The latest test results can be displayed only when all the following conditions are met:
  • A get operation is performed.
  • The test instance type is jitter.
  • The value of nqaJitterStatsIndex is 0.
  • If the value of nqaJitterStatsCompletions is noResult(0) or negotiateFailed(3), the other statistics items are meaningless.
  • If the value of nqaJitterStatsSentProbes is 0, the other statistics items are meaningless.

nqaFTPStatsTable

This table is used to take statistics of network status through FTP. It records the time to establish FTP control connections and time to transmit data.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, and nqaFTPStatsIndex. Among the three indexes, the former two indexes are external indexes.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.4.1.1

nqaFTPStatsIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

The value of this object identifies the index of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.2

nqaFTPStatsCompletions

INTEGER

  • noResult(0)
  • success(1)
  • failure(2)

Read-only

The value of this object identifies the operating status of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.3

nqaFTPStatsRTDOverThresholds

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed the test but exceeds the RTD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.4

nqaFTPStatsCtrlConnMaxTime

Gauge32

Read-only

This object indicates the maximum time to establish an FTP control connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.5

nqaFTPStatsCtrlConnMinTime

Gauge32

Read-only

This object indicates the minimum time to establish an FTP control connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.6

nqaFTPStatsCtrlConnAveTime

Gauge32

Read-only

This object indicates the average time to establish an FTP control connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.7

nqaFTPStatsDataConnMaxTime

Gauge32

Read-only

This object indicates the maximum time spent on FTP data transmission.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.8

nqaFTPStatsDataConnMinTime

Gauge32

Read-only

This object indicates the minimum time spent on FTP data transmission.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.9

nqaFTPStatsDataConnAveTime

Gauge32

Read-only

This object indicates the average time spent on FTP data transmission.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.10

nqaFTPStatsConnectSumTimeMax

Gauge32

Read-only

This object indicates the maximum time spent on an FTP probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.11

nqaFTPStatsConnectSumTimeMin

Gauge32

Read-only

This object indicates the minimum time spent on an FTP probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.12

nqaFTPStatsConnectSumTimeAve

Gauge32

Read-only

This object indicates the average time spent on an FTP probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.13

nqaFTPStatsMessageBodyOctetsSum

Counter32

Read-only

This object indicates the total number of data bytes transmitted through FTP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.14

nqaFTPStatsErrors

Counter32

Read-only

This object indicates the other FTP transmission errors.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.15

nqaFTPStatsTimeouts

Counter32

Read-only

This object indicates the number of times when an FTP operation times out.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.16

nqaFTPStatsDiscontinued

Counter32

Read-only

This object indicates the number of times when FTP is forced to terminate.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.17

nqaFTPStatsProbeResponses

Counter32

Read-only

This object indicates the number of successful probe responses.The value of this object MUST be reported as 0 when no probe responses have been received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.18

nqaFTPStatsSendProbes

Counter32

Read-only

This object indicates the number of sent probes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.19

nqaFTPStatsTestFinished

INTEGER

  • noFinish(0)
  • finish(1)

Read-only

The status of test execution.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.20

nqaFTPStatsRttAvg

Gauge32

Read-only

The value of this object identifies the status of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.4.1.21

nqaFTPStatsLostPacketRatio

Gauge32

Read-only

The ratio of the packets lost to all packets sent in the test.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaMtracertStatsTable

This table is used to take statistics of the network status traced through the Mtracert test. By taking statistics, nqaMtracertStatsTable can calculate the traffic and rate of the multicast network.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMtracertStatsIndex, and nqaMtracertStatsHopIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.6.1.1

nqaMtracertStatsIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

The value of this object identifies the index of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.2

nqaMtracertStatsHopIndex

Integer32 (1..255)

Not-accessible

The value of this object identifies the hop index of the Mtracert test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.3

nqaMtracertStatsAddressType

InetAddressType

Read-only

This object indicates the type of the destination address,and the value range can be unknown(0), ipv4(1) and dns(16).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.4

nqaMtracertStatsAddress

InetAddress

Read-only

This object indicates the destination address of the test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.5

nqaMtracertStatsCompletions

INTEGER

  • noResult(1)
  • success(2)
  • failure(3)

Read-only

The value of this object identifies the operating status of an Mtracert test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.6

nqaMtracertStatsCurHopCount

Gauge32

Read-only

This object is equal to the final hop index of the Mtracert test.The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.7

nqaMtracertStatsCurProbeCount

Gauge32

Read-only

This object indicates the total number of query packets sent in the Mtracert test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.9

nqaMtracertStatsTimeouts

Counter32

Read-only

This object indicates the number of times that an Mtracert test times out.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.10

nqaMtracertStatsBusies

Counter32

Read-only

This object indicates the number of times that initialization or resource application failed.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.11

nqaMtracertStatsSequenceErrors

Counter32

Read-only

This object indicates the number of packet sequence number errors, which include the disorder of packet sequence number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.12

nqaMtracertStatsDrops

Counter32

Read-only

This object indicates the number of times that sending a packet failed.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.13

nqaMtracertStatsProbeResponses

Counter32

Read-only

This object indicates the number of probe responses received in the current Mtracert test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.14

nqaMtracertStatsSentProbes

Counter32

Read-only

This object indicates the total number of query packets sent in the current Mtracert test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.15

nqaMtracertStatsLastGoodProbe

DateAndTime

Read-only

This object indicates the time when the last successful probe response is received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.16

nqaMtracertStatsLastGoodPath

DateAndTime

Read-only

This object indicates the time when the last complete traceroute path is obtained.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.17

nqaMtracertStatsTestFinished

INTEGER

  • noFinish(1),
  • finish(2)

Read-only

The value of this object identifies the operating status of an Mtracert test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.18

nqaMtracertStatsCurPathTTL

Gauge32

Read-only

This object indicates the number of hops from the source address to the destination address in the current Mtracert test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.19

nqaMtracertStatsMaxPathTTL

Gauge32

Read-only

This object indicates the maximum number of hops from the source address to the destination address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.20

nqaMtracertStatsInPkgLossRate

Gauge32

Read-only

This object indicates the multicast packet loss ratio at the incoming interface of the current device calculated according to the recent two tracings.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.21

nqaMtracertStatsSGPkgLossRate

Gauge32

Read-only

This object indicates the multicast packet loss ratio of the current device (S, G) calculated according to the recent two tracings.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.22

nqaMtracertStatsInPkgRate

Gauge32

Read-only

This object indicates the packet rate at the incoming interface of the current device calculated according to the recent two tracings.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.23

nqaMtracertStatsOutPkgRate

Gauge32

Read-only

This object indicates the packet rate at the outgoing interface of the current device calculated according to the recent two tracings.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.6.1.24

nqaMtracertStatsTimeDelay

Gauge32

Read-only

This object indicates the time delay of packets from hop to hop.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaPathJitterStatsTable

The nqaPathJitterStatsTable contains the results of a path jitter test. Based on the statistics, the hop-by-hop (from the source to each hop along the tested path) delay, jitter, and packet loss can be calculated.

The indexes of this table nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPathJitterStatsIndex, and nqaPathJitterStatsHopIndex, with the first two being external indexes.

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.8.1.1

nqaPathJitterStatsIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

This object indicates the index of the statistics on the path jitter.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.2

nqaPathJitterStatsHopIndex

Integer32 (1..255)

Not-accessible

This object indicates the hop index of the path jitter.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.3

nqaPathJitterStatsCompletions

INTEGER

  • noResult(0)
  • success(1)
  • failure(2)

Read-only

This object indicates the execution result for the test case.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.4

nqaPathJitterStatsAddressType

InetAddressType

Read-only

This object indicates the type of the destination address of each hop, and the value range can be unknown(0), ipv4(1) and dns(16).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.5

nqaPathJitterStatsAddress

InetAddress

Read-only

This object indicates the destination address of each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.7

nqaPathJitterStatsNumOfRTT

Counter32

Read-only

This object indicates the number of times that a response is received and that the RTT is successfully calculated by each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.8

nqaPathJitterStatsRttSum

Counter32

Read-only

This object indicates the sum of RTTs of all the packets received by each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.9

nqaPathJitterStatsRttSum2Low

Counter32

Read-only

This object indicates the lower 32 bits of the sum of square of the RTT of every hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.10

nqaPathJitterStatsRttSum2High

Counter32

Read-only

This object indicates the higher 32 bits of the sum of square of the RTT of every hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.11

nqaPathJitterStatsRttMin

Gauge32

Read-only

This object indicates the minimum RTT of each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.12

nqaPathJitterStatsRttMax

Gauge32

Read-only

This object indicates the maximum RTT of each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.13

nqaPathJitterStatsMinOfPositivesSD

Gauge32

Read-only

This object indicates the minimum positive jitter value of all packets that sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.14

nqaPathJitterStatsMaxOfPositivesSD

Gauge32

Read-only

This object indicates the maximum positive jitter value of all packets that sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.15

nqaPathJitterStatsNumOfPositivesSD

Counter32

Read-only

This object indicates the number of packets that are sent from the source to the destination with positive jitter values in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.16

nqaPathJitterStatsSumOfPositivesSD

Counter32

Read-only

This object indicates the sum of the positive jitter values of all packets that are successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.17

nqaPathJitterStatsSum2OfPositivesSDLow

Counter32

Read-only

This object indicates the lower 32 bits of the sum of the square of the positive jitter value of every packet that is successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.18

nqaPathJitterStatsSum2OfPositivesSDHigh

Counter32

Read-only

This object indicates the higher 32 bits of the sum of the square of the positive jitter value of every packet that is successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.19

nqaPathJitterStatsMinOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of all packets that are sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.20

nqaPathJitterStatsMaxOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of all packets that are sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.21

nqaPathJitterStatsNumOfNegativesSD

Counter32

Read-only

This object indicates the number of packets with negative jitter values that are sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.22

nqaPathJitterStatsSumOfNegativesSD

Counter32

Read-only

This object indicates sum of the absolute value of the negative jitter value of every packet that is successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.23

nqaPathJitterStatsSum2OfNegativesSDLow

Counter32

Read-only

This object indicates the lower 32 bits of the sum of the square of the negative jitter value of every packet that is successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.24

nqaPathJitterStatsSum2OfNegativesSDHigh

Counter32

Read-only

This object indicates the higher 32 bits of the sum of the square of the negative jitter value of every packet that is successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.25

nqaPathJitterStatsMinOfPositivesDS

Gauge32

Read-only

This object indicates the minimum positive jitter value of all packets that sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.26

nqaPathJitterStatsMaxOfPositivesDS

Gauge32

Read-only

This object indicates the maximum positive jitter value of all packets that sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.27

nqaPathJitterStatsNumOfPositivesDS

Counter32

Read-only

This object indicates the number of packets that are sent from the destination to the source with positive jitter values in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.28

nqaPathJitterStatsSumOfPositivesDS

Counter32

Read-only

This object indicates the sum of the positive jitter value of every packet that is sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.29

nqaPathJitterStatsSum2OfPositivesDSLow

Counter32

Read-only

This object indicates the lower 32 bits of the sum of the square of the positive jitter value of every packet that is successfully sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.30

nqaPathJitterStatsSum2OfPositivesDSHigh

Counter32

Read-only

This object indicates the higher 32 bits of the sum of the square of the positive jitter value of every packet that is successfully sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.31

nqaPathJitterStatsMinOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of all packets that are sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.32

nqaPathJitterStatsMaxOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of all packets that are sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.33

nqaPathJitterStatsNumOfNegativesDS

Counter32

Read-only

This object indicates the number of packets that are sent from the destination to the source with negative jitter values in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.34

nqaPathJitterStatsSumOfNegativesDS

Counter32

Read-only

This object indicates the sum of the absolute value of the negative jitter value of every packet that is sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.35

nqaPathJitterStatsSum2OfNegativesDSLow

Counter32

Read-only

This object indicates the lower 32 bits of the sum of the square of the negative jitter value of every packet that is successfully sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.36

nqaPathJitterStatsSum2OfNegativesDSHigh

Counter32

Read-only

This object indicates the higher 32 bits of the sum of the square of the negative jitter value of every packet that is successfully sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.39

nqaPathJitterStatsPacketOutOfSequences

Counter32

Read-only

This object indicates the number of the packets with incorrect sequence numbers that are received in a path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.40

nqaPathJitterStatsErrors

Counter32

Read-only

This object indicates statistics on test errors that are not collected by the other objects in this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.41

nqaPathJitterStatsBusies

Counter32

Read-only

This object indicates the number of initialization failures or resource application failures.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.42

nqaPathJitterStatsTimeouts

Counter32

Read-only

This object indicates the number of timeout packets in a path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.43

nqaPathJitterStatsProbeResponses

Counter32

Read-only

This object indicates the number of response packets received in a Jitter test. The value of this object MUST be reported as 0 when no probe responses have been received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.44

nqaPathJitterStatsSentProbes

Counter32

Read-only

This object indicates the number of data packets sent in each hop in a jitter test. The value of this object MUST be reported as 0 when no probes have been sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.45

nqaPathJitterStatsDrops

Counter32

Read-only

This object indicates the number of data packets discarded because of sending failure in all hops in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.46

nqaPathJitterStatsTestFinished

INTEGER

  • nofinish(0)
  • finish(1)

Read-only

This object indicates the execution result for the test case.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.47

nqaPathJitterStatsMaxDelaySD

Gauge32

Read-only

This object indicates the maximum delay of all hops from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.48

nqaPathJitterStatsMaxDelayDS

Gauge32

Read-only

This object indicates the maximum delay of all hops from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.49

nqaPathJitterStatsRttAvg

Gauge32

Read-only

This object indicates the average value of RTTs of all hops.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.50

nqaPathJitterStatsPacketLossRatio

Gauge32

Read-only

This object indicates the packet loss ratio of every hop in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.51

nqaPathJitterStatsAvgJitter

Gauge32

Read-only

This object indicates the average jitter value of all hops.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.52

nqaPathJitterStatsAvgJitterSD

Gauge32

Read-only

This object indicates the average jitter value of all hops from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.53

nqaPathJitterStatsAvgJitterDS

Gauge32

Read-only

This object indicates the average jitter value of all hops from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.54

nqaPathJitterStatsJitterOut

OCTET STRING

Read-only

This object indicates the jitter (RFC1889) value of the outgoing packets of every hop in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.55

nqaPathJitterStatsJitterIn

OCTET STRING

Read-only

This object indicates the jitter (RFC1889) value of the incoming packets of every hop in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.56

nqaPathJitterStatsOwdOverThresholdsSD

Counter32

read-only

The number of tests that violate OWD (One Way Delay) threshold from source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.58

nqaPathJitterStatsNumOfOWD

Counter32

Read-only

This object indicates the number of successfully tested hops with uni-directional delay.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.59

nqaPathJitterStatsOwdSumSD

Counter32

Read-only

This object indicates the number of hops (from the source to the destination) with uni-directional delay.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.60

nqaPathJitterStatsOwdSumDS

Counter32

Read-only

This object indicates the number of hops (from the destination to the source) with uni-directional delay.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.61

nqaPathJitterStatsOwdOverThresholdsDS

Counter32

read-only

The number of tests that violate OWD (One Way Delay) threshold from destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaRtptestStatsTable

The nqaRtptestStatsTable table sets the configuration parameters for a test instance.

The table indexes are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, and nqaRtptestStatsIndex.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.10.1.1

nqaRtptestStatsIndex

Integer32

not-accessible

This object indicates the table index and number of test instance running times. Only one record is kept for each test. The nqaRtptestStatsTable table records only RTP test information.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.2

nqaRtptestStatsCompletions

INTEGER
  • unknown(0)
  • running(1)
  • finished(2)

read-only

This object indicates the running status of a test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.3

nqaRtptestStatsIpTargetAddressType

InetAddressType

read-only

This object indicates the destination address type of an RTP test instance. The value can be unknown(0) or ipv4(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.4

nqaRtptestStatsIpTargetAddress

InetAddress

read-only

This object indicates the destination address of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.5

nqaRtptestStatsIpTargetPort

InetPortNumber

read-only

This object indicates the destination port of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.6

nqaRtptestStatsSourceAddressType

InetAddressType

read-only

This object indicates the source address type of an RTP test instance. The value can be unknown(0) or ipv4(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.7

nqaRtptestStatsIpSourceAddress

InetAddress

read-only

This object indicates the source address of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.8

nqaRtptestStatsIpSourcePort

InetPortNumber

read-only

This object indicates the source port of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.9

nqaRtptestStatsMinRtt

Unsigned32

read-only

This object indicates the minimum two-way delay of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.10

nqaRtptestStatsMaxRtt

Unsigned32

read-only

This object indicates the maximum two-way delay of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.11

nqaRtptestStatsAverageRtt

Unsigned32

read-only

This object indicates the average two-way delay of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.12

nqaRtptestStatsProbeResponses

Counter32

read-only

This object indicates the number of response packets received by an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.13

nqaRtptestStatsSentProbes

Counter32

read-only

This object indicates the number of probe packets sent by an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.14

nqaRtptestStatsMaxJitter

Unsigned32

read-only

This object indicates the maximum jitter of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.15

nqaRtptestStatsMinJitter

Unsigned32

read-only

This object indicates the minimum jitter of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.16

nqaRtptestStatsAvgJitter

Unsigned32

read-only

This object indicates the average jitter of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.17

nqaRtptestStatsLostPacketRatio

Unsigned32

read-only

This object indicates the packet loss ratio of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.10.1.18

nqaRtptestStatsSumRtt

Unsigned32

read-only

This object indicates the sum two-way delay of an RTP test instance.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaRtplistenStatsTable

The table indexes are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, and nqaRtplistenStatsIndex.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.11.1.1

nqaRtplistenStatsIndex

Integer32

not-accessible

This object indicates the table index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.2

nqaRtplistenStatsCompletions

INTEGER

{

unknown(0),

running(1),

finished(2)

}

read-only

This object indicates the destination address type of an NQA RTP listening test instance. The value can be unknown(0) or ipv4(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.3

nqaRtplistenStatsIpTargetAddressType

INTEGER:
  • unknown(0)
  • running(1)
  • finished(2)

read-only

This object indicates the running status of a test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.4

nqaRtplistenStatsIpTargetAddress

InetAddress

read-only

This object indicates the destination address of an RTP snoop test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.5

nqaRtplistenStatsIpTargetPort

InetPortNumber

read-only

This object indicates the destination port of an RTP snoop test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.6

nqaRtplistenStatsSourceAddressType

InetAddressType

read-only

This object indicates the source address type of an NQA RTP listening test instance. The value can be unknown(0) or ipv4(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.7

nqaRtplistenStatsIpSourceAddress

InetAddress

read-only

This object indicates the source address of an RTP snoop test instance.

This object is implemented as defined in the corresponding MIB file.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.8

nqaRtplistenStatsIpSourcePort

InetPortNumber

read-only

This object indicates the source port of an RTP snoop test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.9

nqaRtplistenStatsDSField

Unsigned32

read-only

This object indicates the IP packet priority of an NQA RTP listening test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.10

nqaRtplistenStatsMaxJitter

Unsigned32

read-only

This object indicates the maximum jitter of an NQA RTP listening test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.11

nqaRtplistenStatsMinJitter

Unsigned32

read-only

This object indicates the minimum jitter of an NQA RTP listening test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.12

nqaRtplistenStatsAvgJitter

Unsigned32

read-only

This object indicates the average jitter of an NQA RTP listening test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.13

nqaRtplistenStatsLostPacketRatio

Unsigned32

read-only

This object indicates the packet loss ratio of an NQA RTP listening test instance.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.4.11.1.14

nqaRtplistenStatsMaxLostPacketNumber

Unsigned32

read-only

This object indicates the maximum number of lost packets of an NQA RTP listening test instance.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaHistoryTable

This table is used to take statistics of the history information about test instances. It describes the history information about the packets of the test instance.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaHistoryIndex, nqaHistoryHopIndex, and nqaHistoryProbeIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.5.1.1.1

nqaHistoryIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

The value of this object identifies this table. It depends on the scheduling times of the test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.2

nqaHistoryHopIndex

Integer32 (1..255)

Not-accessible

The value of this object identifies each hop. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.3

nqaHistoryProbeIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

The value of this object identifies test instance probes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.4

nqaHistoryTimeStamp

DateAndTime

Read-only

This object indicates the start time of a probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.5

nqaHistoryAddressType

InetAddressType

Read-only

This object indicates the address type of the history record.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.6

nqaHistoryAddress

InetAddress

Read-only

This object indicates the destination address of the test. For Traceroute, it is the destination address of each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.7

nqaHistoryCompletionTime

INTEGER

  • success(1)
  • timeout(2)
  • drop(3)
  • busy(4)
  • overThreshold(5)
  • disconnected(6)
  • noConnected(7)

Read-only

The value of this object identifies the time of a probe to finish the test. The value of this object is reported as 0 when it is not possible to transmit a probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.8

nqaHistoryFinishState

INTEGER

Read-only

The value of this object identifies the status of a probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.9

nqaHistoryLastRC Integer32 Read-only The value of this object indicates the received return value. This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaMtracertHistoryTable

This table is used to take statistics of the history information about Mtracert test instances. It describes the history information about a certain packet in the test instance.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMtracertHistoryIndex, and nqaMtracertHistoryHopIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.5.3.1.3

nqaMtracertHistoryAddressType

InetAddressType

Read-only

This object indicates the address type of the history record.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.4

nqaMtracertHistoryAddress

InetAddress

Read-only

This object indicates the destination address of each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.5

nqaMtracertHistoryTimeStamp

DateAndTime

Read-only

This object indicates the NTP timestamp when the query packet arrives at the current device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.6

nqaMtracertHistoryCompletionTime

Integer32

Read-only

The value of this object identifies how many milliseconds a probe test takes.The value of this object is reported as 0 when it is not possible to transmit a probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.8

nqaMtracertHistoryCurQueryMode

INTEGER

  • maxHops (1)
  • hopByHop (2)

Read-only

The value of this object identifies the query mode of the current Mtracert test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.9

nqaMtracertHistoryQueryArrivalTime

Unsigned32

Read-only

This object indicates the NTP timestamp, which records the time when a request packet arrives at the device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.10

nqaMtracertHistoryIncomingIfAddress

InetAddress

Read-only

This object indicates the address of the incoming interface of the multicast data flow.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.11

nqaMtracertHistoryOutgoingIfAddress

InetAddress

Read-only

This object indicates the address of the outgoing interface of the multicast data flow.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.12

nqaMtracertHistoryPreHopRouterAddress

InetAddress

Read-only

This object indicates the address of the incoming interface of the upstream device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.13

nqaMtracertHistoryInputPacketCount

Gauge32

Read-only

This object indicates the total number of multicast packets received by the incoming interface from all source groups.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.14

nqaMtracertHistoryOutputPacketCount

Gauge32

Read-only

This object indicates the total number of multicast packets forwarded by or will be forwarded by the outgoing interface from all source groups.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.15

nqaMtracertHistoryTotalSGPacketCount

Gauge32

Read-only

This object indicates the total number of multicast packets forwarded by the current device from the specified source group.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.16

nqaMtracertHistoryRtgProtocol

INTEGER

  • dvmrp(1)
  • mospf(2)
  • pim(3)
  • cbt(4)
  • pimUsingSpecRteTab(5)
  • pimUsingStaticRte(6)
  • dvmrpUsingStaticRte(7)
  • pimUsingMBGPRte(8)
  • cbtUsingSpecRteTab(9)
  • cbtUsingStaticRte(10)
  • pimUsingState(11)
  • unknownProtocol(255)

Read-only

The value of this object describes the multicast routing protocols running between the current device and upstream devices.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.17

nqaMtracertHistoryFwdTTL

Gauge32

Read-only

This object indicates the TTL value required before a packet is forwarded on the outgoing port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.18

nqaMtracertHistoryFwdCode

INTEGER

  • noError(1)
  • wrongIf(2)
  • pruneSent(3)
  • pruneRCVD(4)
  • scoped(5)
  • noRoute(6)
  • wrongLastHop(7)
  • notForwarding(8)
  • reachedRP(9)
  • noMulticast(11)
  • infoHidden(12)
  • noSpace(130)
  • oldRouter(131)
  • adminProhib(132)
  • unknownError(255)

Read-only

This object indicates the message error code.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.3.1.19

nqaMtracertHistroyFinishState

INTEGER

  • success(1)
  • timeout(2)
  • busy(3)
  • drop(4)
  • overThreshold(5)
  • disconnected(6)
  • noConnected(7)

Read-only

The value of this object identifies the status of a finished probe in an Mtracert test.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaJitterCollectStatsTable

This table is used to test network status by sending packets. By taking multiple statistics, it calculates the jitter value of network time delay.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, and nqaJitterCollectStatsIndex. Among the three indexes, the former two indexes are external indexes.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.8.1.1.1

nqaJitterCollectStatsIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

This object indicates the index of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.2

nqaJitterCollectStatsCompletions

Counter32

Read-only

This object indicates the number successful jitter tests.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.3

nqaJitterCollectStatsRTDOverThresholds

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed but exceeds the RTD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.4

nqaJitterCollectStatsOWDOverThresholdsSD

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed and the packet delay from the source to destination exceeds the OWD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.5

nqaJitterCollectStatsOWDOverThresholdsDS

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed and the packet delay from the destination to source exceeds the OWD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.6

nqaJitterCollectStatsNumOfRTT

Counter32

Read-only

This object indicates the number of successful jitter tests.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.7

nqaJitterCollectStatsRTTSum

Counter32

Read-only

This object indicates the total RTTs of packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.8

nqaJitterCollectStatsRTTSum2Low

Counter32

Read-only

This object indicates the low 32-bit of the RTT square sum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.9

nqaJitterCollectStatsRTTSum2High

Counter32

Read-only

This object indicates the high 32-bit of the RTT square sum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.10

nqaJitterCollectStatsRTTMin

Gauge32

Read-only

This object indicates the minimum RTT value of the packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.11

nqaJitterCollectStatsRTTMax

Gauge32

Read-only

This object indicates the maximum RTT value of the packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.12

nqaJitterCollectStatsMinOfPositivesSD

Gauge32

Read-only

This object indicates the minimum positive jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.13

nqaJitterCollectStatsMaxOfPositivesSD

Gauge32

Read-only

This object indicates the maximum positive jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.14

nqaJitterCollectStatsNumOfPositivesSD

Counter32

Read-only

This object indicates the sum of positive jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.15

nqaJitterCollectStatsSumOfPositivesSD

Counter32

Read-only

This object indicates the total RTTs of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.16

nqaJitterCollectStatsSum2OfPositivesSDLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the positive jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.17

nqaJitterCollectStatsSum2OfPositivesSDHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the positive jitter values of packets sent from the source to destination in a Jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.18

nqaJitterCollectStatsMinOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.19

nqaJitterCollectStatsMaxOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.20

nqaJitterCollectStatsNumOfNegativesSD

Counter32

Read-only

This object indicates the total negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.21

nqaJitterCollectStatsSumOfNegativesSD

Counter32

Read-only

This object indicates the absolute value sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.22

nqaJitterCollectStatsSum2OfNegativesSDLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.23

nqaJitterCollectStatsSum2OfNegativesSDHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.24

nqaJitterCollectStatsMinOfPositivesDS

Gauge32

Read-only

This object indicates the minimum positive jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.25

nqaJitterCollectStatsMaxOfPositivesDS

Gauge32

Read-only

This object indicates the maximum positive jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.26

nqaJitterCollectStatsNumOfPositivesDS

Counter32

Read-only

This object indicates the number of positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.27

nqaJitterCollectStatsSumOfPositivesDS

Counter32

Read-only

This object indicates the sum of positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.28

nqaJitterCollectStatsSum2OfPositivesDSLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.29

nqaJitterCollectStatsSum2OfPositivesDSHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.30

nqaJitterCollectStatsMinOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.31

nqaJitterCollectStatsMaxOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.32

nqaJitterCollectStatsNumOfNegativesDS

Counter32

Read-only

This object indicates the number of negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.33

nqaJitterCollectStatsSumOfNegativesDS

Counter32

Read-only

This object indicates the absolute value sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.34

nqaJitterCollectStatsSum2OfNegativesDSLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.35

nqaJitterCollectStatsSum2OfNegativesDSHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.36

nqaJitterCollectStatsMaxDelaySD

Gauge32

read-only

This object indicates the maximum of all OWD (One Way Delay) from source to destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.37

nqaJitterCollectStatsMaxDelayDS

Gauge32

read-only

This object indicates the maximum of all OWD (One Way Delay) from destination to source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.38

nqaJitterCollectStatsNumOfOWD

Counter32

Read-only

This object indicates the number of OWDs in successful tests.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.39

nqaJitterCollectStatsOWSumSD

Counter32

Read-only

This object indicates the total OWDs of the packets from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.40

nqaJitterCollectStatsOWSumDS

Counter32

Read-only

This object indicates the total OWDs of the packets from the destination to source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.41

nqaJitterCollectStatsPacketLossSD

Counter32

Read-only

This object indicates the number of the packets lost when being sent from the source to destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.42

nqaJitterCollectStatsPacketLossDS

Counter32

Read-only

This object indicates the number of the packets lost when being sent from the destination to source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.43

nqaJitterCollectStatsPacketLossUnknown

Counter32

Read-only

This object indicates the number of packets discarded at an unknown direction in a jitter test .

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.44

nqaJitterCollectStatsPacketOutOfSequences

Counter32

read-only

This object indicates the number of packets arrived out of sequence.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.45

nqaJitterCollectStatsPacketLossRatio

Gauge32

read-only

This object indicates the ratio of the packets lost to all packets sent in the test.

When the value of the nqaJitterCollectStatsSentProbes object is 0, the packet loss rate is 100%.

1.3.6.1.4.1.2011.5.25.111.8.1.1.46

nqaJitterCollectStatsErrors

Counter32

Read-only

This object indicates errors not represented by other objects in this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.47

nqaJitterCollectStatsBusies

Counter32

Read-only

This object indicates the number of initialization or resource application failures.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.48

nqaJitterCollectStatsTimeouts

Counter32

Read-only

This object indicates the number of time-out packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.49

nqaJitterCollectStatsProbeResponses

Counter32

Read-only

This object indicates the number of data packets to which responses have been received in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.50

nqaJitterCollectStatsSentProbes

Counter32

Read-only

This object indicates the number of data packets sent in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.51

nqaJitterCollectStatsDrops

Counter32

Read-only

This object indicates the number of data packets discarded because of sending failure in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.52

nqaJitterCollectStatsRTTAvg

Gauge32

Read-only

This object indicates the average RTT.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.53

nqaJitterCollectStatsAvgJitter

Gauge32

Read-only

This object indicates the average jitter value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.54

nqaJitterCollectStatsAvgJitterSD

Gauge32

Read-only

This object indicates the average jitter value from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.55

nqaJitterCollectStatsAvgJitterDS

Gauge32

Read-only

This object indicates the average jitter value from the destination to source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.56

nqaJitterCollectStatsJitterOut

OCTET STRING

Read-only

This object indicates the jitter (RFC1889) values in sending packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.57

nqaJitterCollectStatsJitterIn

OCTET STRING

Read-only

This object indicates the jitter (RFC1889) values in receiving packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.58

nqaJitterCollectStatsMinDelaySD

Gauge32

Read-only

The minimum OWD from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.59

nqaJitterCollectStatsMinDelayDS

Gauge32

Read-only

The minimum OWD from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.60

nqaJitterCollectStatsAvgDelaySD

Gauge32

Read-only

The average OWD from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.61

nqaJitterCollectStatsAvgDelayDS

Gauge32

Read-only

The average OWD from the destination to the source.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaAlarmTable

This table is an NQA alarm table, which is used to configure the object to be monitored (nqaAlarmVariable) and the index of the event that is triggered when the upper or lower threshold is exceeded. Each index is corresponding to one event in nqaEventTable.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, and nqaAlarmIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.9.3.1.1

nqaAlarmIndex

Integer32 (1..65535)

Not-accessible

This object indicates the index of nqaAlarmTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.3.1.11

nqaAlarmVariable

INTEGER

  • rttAvg(1)
  • lostPacketRatio(2)
  • packetLossSd(3)
  • packetLossDs(4)
  • jitterRavg(5)
  • jitterSdAvg(6)
  • jitterDsAvg(7)

Read-create

The value of this object identifies the type of the alarm variable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.3.1.12

nqaAlarmSampleType

INTEGER

  • delta(1)
  • absolute(2)

Read-create

This object indicates the absolute or relative value of the alarm threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.3.1.13

nqaAlarmValue

Integer32 (0..2147483647)

Read-only

This object indicates the sample value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.3.1.14

nqaAlarmStartUpNqaAlarm

INTEGER

  • risingAlarm(1)
  • fallingAlarm(2)
  • risingOrFallingAlarm(3)

Read-create

This object indicates the type of packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.3.1.15

nqaAlarmRisingThreshold

Integer32 (0..2147483647)

Read-create

This object indicates the upper threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.3.1.16

nqaAlarmFallingThreshold

Integer32 (0..2147483647)

Read-create

This object indicates the lower threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.3.1.17

nqaAlarmRisingEventIndex

Integer32 (1..65535)

Read-create

This object indicates the index of the event that is triggered when the upper threshold is exceeded.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.3.1.18

nqaAlarmFallingEventIndex

Integer32 (1..65535)

Read-create

This object indicates the index of the event that is triggered when the lower threshold is exceeded.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.3.1.19

nqaAlarmDescription

OCTET STRING (SIZE (0..127))

Read-create

This object indicates the alarm description.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.3.1.51

nqaAlarmStatus

RowStatus

Read-create

This object indicates the row status of hwOamMacOperTable.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

You can delete the entries in this table.

Access Restriction

The entries in this table can be read without restriction.

nqaEventTable

This table is an NQA event table, which is used to configure three modes of processing an alarm-triggered event: log, trap, and log-trap.

The index of this table is nqaEventIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.9.4.1.1

nqaEventIndex

Integer32 (1..65535)

Not-accessible

This object indicates the index of nqaEventTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.4.1.11

nqaEventType

INTEGER

  • none(1)
  • log(2)
  • trap(3)
  • logAndTrap(4)
  • linkage(5)

Read-create

This object indicates the type of an event.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.4.1.12

nqaEventDescription

OCTET STRING (SIZE (0..127))

Read-create

This object indicates the event description.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.4.1.13

nqaEventAdminName

OCTET STRING (SIZE (0..32))

Read-create

This object indicates the administrator of an associated test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.4.1.14

nqaEventOperationTag

OCTET STRING (SIZE (0..32))

Read-create

This object indicates the name of the linkage test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.9.4.1.51

nqaEventStatus

RowStatus

Read-create

This object indicates the row status of nqaEventTable.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

nqaRtpUdpServerTable

The table indexes are nqaRtpUdpServerAddress, nqaRtpUdpServerPort, and nqaRtpUdpServerVrfName.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.3.5.1.1

nqaRtpUdpServerAddressType

InetAddressType

read-create

This object indicates the address type of the RTP-UDP server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.3.5.1.2

nqaRtpUdpServerAddress

InetAddress

not-accessible

This object indicates the IP address of the RTP-UDP server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.3.5.1.3

nqaRtpUdpServerPort

InetPortNumber

not-accessible

This object indicates the port number of the RTP-UDP server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.3.5.1.4

nqaRtpUdpServerVrfName

DisplayString(SIZE(1..31))

not-accessible

This object indicates the VRF name of the RTP-UDP server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.3.5.1.5

nqaRtpUdpServerStatus

RowStatus

read-create

This object indicates the status of the RTP-UDP server.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table only if the index values of nqaRtpUdpServerAddress, nqaRtpUdpServerPort, and nqaRtpUdpServerVrfName are specified.

  • The value of the nqaRtpUdpServerAddressType object must be configured, and the value must be ipv4(1).
  • The value of the nqaRtpUdpServerStatus object must be CreateAndGo(4).

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The indexes must be specified.

The value of the nqaRtpUdpServerStatus object must be Destroy(6).

Access Restriction

You can read an entry in this table by either specifying or not specifying the index.

The value of the nqaRtpUdpServerStatus object can be active(1) or notInService(2).

nqaRtpTcpServerTable

The table indexes are nqaRtpTcpServerAddress, nqaRtpTcpServerPort, and nqaRtpTcpServerVrfName.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.3.6.1.1

nqaRtpTcpServerAddressType

InetAddressType

read-create

This object indicates the address type of the RTP-TCP server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.3.6.1.2

nqaRtpTcpServerAddress

InetAddress

not-accessible

This object indicates the IP address of the RTP-TCP server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.3.6.1.3

nqaRtpTcpServerPort

InetPortNumber

not-accessible

This object indicates the port number of the RTP-TCP server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.3.6.1.4

nqaRtpTcpServerVrfName

DisplayString(SIZE(1..31))

not-accessible

This object indicates the VRF name of the RTP-TCP server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.111.3.6.1.5

nqaRtpTcpServerStatus

RowStatus

read-create

This object indicates the status of the RTP-TCP server.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table only if the index values of nqaRtpTcpServerAddress, nqaRtpTcpServerPort, and nqaRtpTcpServerVrfName are specified.

  • The value of the nqaRtpTcpServerAddressType object must be configured, and the value must be ipv4(1).
  • The value of the nqaRtpTcpServerStatus object must be CreateAndGo(4).

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The indexes must be specified.

The value of the nqaRtpTcpServerStatus object must be Destroy(6).

Access Restriction

You can read an entry in this table by either specifying or not specifying the index.

The value of the nqaRtpTcpServerStatus object can be active(1) or notInService(2).

Description of Alarm Objects

nqaResultsProbeFailed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.1

nqaResultsProbeFailed

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaResultsAddressType

nqaResultsAddress

nqaResultsCompletionTimeMin

nqaResultsCompletionTimeMax

nqaResultsSumCompletionTime

nqaResultsProbeResponses

nqaResultsSentProbes

nqaResultsSumCompletionTime2Low

nqaResultsSumCompletionTime2High

nqaResultsLastGoodProbe

nqaResultsLastGoodPath

An alarm is generated when the number of continuous probe failures reaches the threshold.

This object is implemented as defined in the corresponding MIB files.

nqaResultsTestFailed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.2

nqaResultsTestFailed

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaResultsAddressType

nqaResultsAddress

nqaResultsCompletionTimeMin

nqaResultsCompletionTimeMax

nqaResultsSumCompletionTime

nqaResultsProbeResponses

nqaResultsSentProbes

nqaResultsSumCompletionTime2Low

nqaResultsSumCompletionTime2High

nqaResultsLastGoodProbe

nqaResultsLastGoodPath

An alarm is generated when the number of continuous test failures reaches the threshold.

This object is implemented as defined in the corresponding MIB files.

nqaResultsTestCompleted

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.3

nqaResultsTestCompleted

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaResultsAddressType

nqaResultsAddress

nqaResultsCompletionTimeMin

nqaResultsCompletionTimeMax

nqaResultsSumCompletionTime

nqaResultsProbeResponses

nqaResultsSentProbes

nqaResultsSumCompletionTime2Low

nqaResultsSumCompletionTime2High

nqaResultsLastGoodProbe

nqaResultsLastGoodPath

An alarm is generated when a test succeeds.

This object is implemented as defined in the corresponding MIB files.

nqaResultsThresholdNotification

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.4

nqaResultsThresholdNotification

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaResultsAddressType

nqaResultsAddress

nqaAdminCtrlThreshold1

nqaResultsCompletionTimeMax

nqaResultsRTDOverThresholds

An alarm is generated when the test time exceeds the threshold.

This object is implemented as defined in the corresponding MIB files.

nqaHTTPStatsProbeFailed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.5

nqaHTTPStatsProbeFailed

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaHTTPStatsDNSRTTSum

nqaHTTPStatsTCPConnectRTTSum

nqaHTTPStatsTransactionRTTSum

nqaHTTPStatsDNSServerTimeouts

nqaHTTPStatsTCPConnectTimeouts

nqaHTTPStatsTransactionTimeouts

nqaHTTPStatsDNSQueryErrors

nqaHTTPStatsTcpConnErrors

nqaHTTPStatsErrors

nqaHTTPStatsProbeResponses

nqaHTTPStatsSendProbes

An alarm is generated when the number of continuous probe failures reaches the threshold.

This object is implemented as defined in the corresponding MIB files.

nqaHTTPStatsTestFailed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.6

nqaHTTPStatsTestFailed

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaHTTPStatsDNSRTTSum

nqaHTTPStatsTCPConnectRTTSum

nqaHTTPStatsTransactionRTTSum

nqaHTTPStatsDNSServerTimeouts

nqaHTTPStatsTCPConnectTimeouts

nqaHTTPStatsTransactionTimeouts

nqaHTTPStatsDNSQueryErrors

nqaHTTPStatsTcpConnErrors

nqaHTTPStatsErrors

nqaHTTPStatsProbeResponses

nqaHTTPStatsSendProbes

An alarm is generated when the number of continuous test failures reaches the threshold.

This object is implemented as defined in the corresponding MIB files.

nqaHTTPStatsTestCompleted

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.7

nqaHTTPStatsTestCompleted

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaHTTPStatsDNSRTTSum

nqaHTTPStatsTCPConnectRTTSum

nqaHTTPStatsTransactionRTTSum

nqaHTTPStatsDNSServerTimeouts

nqaHTTPStatsTCPConnectTimeouts

nqaHTTPStatsTransactionTimeouts

nqaHTTPStatsDNSQueryErrors

nqaHTTPStatsTcpConnErrors

nqaHTTPStatsErrors

nqaHTTPStatsProbeResponses

nqaHTTPStatsSendProbes

An alarm is generated when a test succeeds.

This object is implemented as defined in the corresponding MIB files.

nqaHTTPStatsThresholdNotification

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.8

nqaHTTPStatsThresholdNotification

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaAdminCtrlThreshold1

nqaAdminCtrlThreshold2

nqaAdminCtrlThreshold3

nqaHTTPStatsDNSRTTMax

nqaHTTPStatsTCPConnectRTTMax

nqaHTTPStatsTransactionRTTMax

nqaHTTPStatsRTDOverThresholds

An alarm is generated when the test exceeds the threshold.

This object is implemented as defined in the corresponding MIB files.

nqaJitterStatsTestFailed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.10

nqaJitterStatsTestFailed

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaJitterStatsRTTSum

nqaJitterStatsRTTSum2Low

nqaJitterStatsRTTSum2High

nqaJitterStatsRTTMin

nqaJitterStatsRTTMax

nqaJitterStatsPacketOutOfSequences

nqaJitterStatsErrors

nqaJitterStatsBusies

nqaJitterStatsTimeouts

nqaJitterStatsDrops

nqaJitterStatsProbeResponses

nqaJitterStatsSentProbes

nqaJitterStatsMaxDelaySD

nqaJitterStatsMaxDelayDS

nqaJitterStatsJitterOut

nqaJitterStatsJitterIn

nqaJitterStatsOWSumSD

nqaJitterStatsOWSumDS

An alarm is generated when the number of continuous test failures reaches the threshold.

This object is implemented as defined in the corresponding MIB files.

nqaJitterStatsTestCompleted

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.11

nqaJitterStatsTestCompleted

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaJitterStatsRTTSum

nqaJitterStatsRTTSum2Low

nqaJitterStatsRTTSum2High

nqaJitterStatsRTTMin

nqaJitterStatsRTTMax

nqaJitterStatsPacketOutOfSequences

nqaJitterStatsErrors

nqaJitterStatsBusies

nqaJitterStatsTimeouts

nqaJitterStatsDrops

nqaJitterStatsProbeResponses

nqaJitterStatsSentProbes

nqaJitterStatsMaxDelaySD

nqaJitterStatsMaxDelayDS

nqaJitterStatsJitterOut

nqaJitterStatsJitterIn

nqaJitterStatsOWSumSD

nqaJitterStatsOWSumDS

An alarm is generated when a test succeeds.

This object is implemented as defined in the corresponding MIB files.

nqaFTPStatsProbeFailed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.12

nqaFTPStatsProbeFailed

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaFTPStatsCtrlConnMaxTime

nqaFTPStatsDataConnMaxTime

nqaFTPStatsConnectSumTimeMax

nqaFTPStatsErrors

nqaFTPStatsTimeouts

nqaFTPStatsProbeResponses

nqaFTPStatsSendProbes

An alarm is generated when the number of continuous probe failures reaches the threshold.

This object is implemented as defined in the corresponding MIB files.

nqaFTPStatsTestFailed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.13

nqaFTPStatsTestFailed

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaFTPStatsCtrlConnMaxTime

nqaFTPStatsDataConnMaxTime

nqaFTPStatsConnectSumTimeMax

nqaFTPStatsErrors

nqaFTPStatsTimeouts

nqaFTPStatsProbeResponses

nqaFTPStatsSendProbes

An alarm is generated when the number of continuous test failures reaches the threshold.

This object is implemented as defined in the corresponding MIB files.

nqaFTPStatsTestCompleted

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.14

nqaFTPStatsTestCompleted

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaScheduleOperStatus

nqaFTPStatsCtrlConnMaxTime

nqaFTPStatsDataConnMaxTime

nqaFTPStatsConnectSumTimeMax

nqaFTPStatsErrors

nqaFTPStatsTimeouts

nqaFTPStatsProbeResponses

nqaFTPStatsSendProbes

An alarm is generated when a test succeeds.

This object is implemented as defined in the corresponding MIB files.

nqaFTPStatsThresholdNotification

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.15

nqaFTPStatsThresholdNotification

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaAdminCtrlThreshold1

nqaAdminCtrlThreshold2

nqaFTPStatsCtrlConnMaxTime

nqaFTPStatsDataConnMaxTime

nqaFTPStatsRTDOverThresholds

An alarm is generated when the test time exceeds the set threshold.

This object is implemented as defined in the corresponding MIB files.

nqaJitterStatsRTDThresholdNotification

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.16

nqaJitterStatsRTDThresholdNotification

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaAdminCtrlThreshold1

nqaJitterStatsRTTMax

nqaJitterStatsMaxDelaySD

nqaJitterStatsMaxDelayDS

nqaJitterStatsRTDOverThresholds

An alarm is generated when the test time exceeds the set threshold.

This object is implemented as defined in the corresponding MIB files.

nqaJitterStatsOWDThresholdNotificationSD

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.17

nqaJitterStatsOWDThresholdNotificationSD

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaAdminCtrlThreshold2

nqaJitterStatsRTTMax

nqaJitterStatsMaxDelaySD

nqaJitterStatsMaxDelayDS

nqaJitterStatsOWDOverThresholdsSD

An alarm is generated when the packet delay exceeds the OWD-SD threshold.

This object is implemented as defined in the corresponding MIB files.

nqaJitterStatsOWDThresholdNotificationDS

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.18

nqaJitterStatsOWDThresholdNotificationDS

nqaAdminParaTargetAddressType

nqaAdminParaTargetAddress

nqaAdminCtrlThreshold3

nqaJitterStatsRTTMax

nqaJitterStatsMaxDelaySD

nqaJitterStatsMaxDelayDS

nqaJitterStatsOWDOverThresholdsDS

An alarm is generated when the packet delay exceeds the OWD-DS threshold.

This object is implemented as defined in the corresponding MIB files.

nqaRisingAlarmNotification

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.20

nqaRisingAlarmNotification

  • nqaAlarmVariable
  • nqaAlarmSampleType
  • nqaAlarmValue
  • nqaAlarmRisingThreshold
  • nqaAlarmDescription

This object indicates that an alarm is generated when the monitored object exceeds the higher threshold.

This object is implemented as defined in the corresponding MIB files.

nqaFallingAlarmNotification

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.21

nqaFallingAlarmNotification

nqaAlarmVariable

nqaAlarmSampleType

nqaAlarmValue

nqaAlarmFallingThreshold

nqaAlarmDescription

This object indicates that an alarm is generated when the monitored object falls below the lower threshold.

This object is implemented as defined in the corresponding MIB files.

nqaFtpSaveRecordNotification

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.22

nqaFtpSaveRecordNotification

nqaFtpSaveRecordLastFileName

The NQA test results are saved through FTP.

This object is implemented as defined in the corresponding MIB files.

nqaResultsTestResultChange

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.6.28

nqaResultsTestResultChange

nqaResultsCompletions

This object indicates that a trap message will be sent when test results change.

This object is implemented as defined in the corresponding MIB file.

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178122

Views: 769703

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next