No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwErpsRingConfigTable

hwErpsRingConfigTable

This table describes how to configure ERPS rings.

The index of this table is hwConfigRingId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.256.1.2.1.1

hwConfigRingId

Integer32 (1..255)

accessible-for-notify

The value of this object identifies the ID of an ERPS ring.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.2

hwConfigRingRowStatus

RowStatus

Read-create

The value of this object identifies the creation of an ERPS ring:
  • CreateAndGo: creates an ERPS ring.
  • Destroy: deletes the created ERPS rings.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.3

hwConfigDescription

OctetString(0..80)

Read-create

This object indicates the description of an ERPS ring.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.4

hwConfigControlVlanId

Integer32 (0 | 1..4094)

Read-create

The value of this object identifies the ID of a control VLAN configured for an ERPS ring.

If the value is 0, the configured control VLAN will be deleted.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.5

hwConfigProtectedInstanceList

OctetString(0..512)

Read-create

The value of this object identifies the list of protected instances of an ERPS ring.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.6

hwConfigWtrTimerSettingValue

Integer32(1..12)

Read-create

The value of this object identifies the configured time of the WTR timer, in minutes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.7

hwConfigGuardTimerSettingValue

Integer32(1..200)

Read-create

The value of this object identifies the running time of the guard timer, in centiseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.8

hwConfigHoldoffTimerSettingValue

Integer32(0..100)

Read-create

The value of this object identifies the running time of the hold-off timer, in hundred milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.9

hwConfigResetRapsPktCnt

INTEGER

{

clear(1),

unused(65535)

}

Read-create

The value of this object identifies whether the statistics about all the ports added to an ERPS ring are cleared:
  • When a Get operation is performed on this object, the value is unused(65535).
  • When a Set operation is performed on this object, the value is clear(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.10

hwConfigRapsMel

Integer32(0..7)

Read-create

The value of this object identifies the MEL value of an ERPS ring.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.11

hwConfigVersion

INTEGER

{

v1(1),

v2(2)

}

Read-create

The value of this object identifies the ERPS version number.

By default, ERPSv1 is used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.12

hwConfigRevertiveMode

INTEGER

{

revertive(1),

nonRevertive(2)

}

Read-create

The value of this object identifies the ERPS ring switching mode: revertive switching or non-revertive switching.

By default, ERPS rings use revertive switching.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.13

hwConfigRingRole

INTEGER

{

majorRing(1),

subRing(2)

}

Read-create

The value of this object identifies an ERPS major ring or sub-ring.

By default, all ERPS rings are major rings.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.14

hwConfigRapsChannelMode

INTEGER

{

virtualChannel(1),

nonVirtualChannel(2),

unused(65535)

}

Read-create

The value of this object identifies the R-APS PDU transmission mode on a sub-ring.

By default, NVC is used for R-APS PDU transmission on sub-rings.

The value can only be unused(65535) for ERPS major rings.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.15

hwConfigTcNotifyErpsRing

OCTET STRING (SIZE (0..32))

Read-create

This object indicates the topology change notification function for an ERPS ring.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.16

hwConfigTcProtectionInterval

Integer32 (1..600)

Read-create

The value of this object identifies the topology change protection interval at which topology change notification messages are sent, in seconds.

The default interval is 2s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.17

hwConfigTcProtectionThreshold

Integer32 (1..255)

Read-create

The value of this object identifies the maximum number of topology change notification messages that can be processed during the topology change protection interval.

The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.256.1.2.1.18

hwConfigProtectionSwitch

INTEGER

{

clear(1),

idle(65535)

}

Read-create

The value of this object indicates whether to clear ERPS configurations.

  • When the object is read, the value is idle(65535).

  • When ERPS configurations are cleared, the value is clear(1).

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The ID of the ERPS ring is valid, and the ERPS ring has not been created.

Modification Restriction

The new value is valid.

Deletion Restriction

No port is added to the ERPS ring.

Access Restriction

The ID of the ERPS ring is valid, and the ERPS ring has been created.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 681467

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next