No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mplsL3VpnVrfTable

mplsL3VpnVrfTable

This table specifies per-interface MPLS L3VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated with MPLS/VPN interfaces.

Note that multiple interfaces can belong to the same VRF instance. The collection of all VRF instances comprises an actual VPN.

The index of this table is mplsL3VpnVrfName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.10.166.11.1.2.2.1.1

mplsL3VpnVrfName

MplsL3VpnName

Not-accessible

The human-readable name of this VPN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.3

mplsL3VpnVrfDescription

SnmpAdminString

Read-create

The human-readable description of this VRF.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.4

mplsL3VpnVrfRD

MplsL3VpnRouteDistinguisher

Read-create

The route distinguisher for this VRF.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.5

mplsL3VpnVrfCreationTime

TimeStamp

Read-only

The time at which this VRF entry was created.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.6

mplsL3VpnVrfOperStatus

INTEGER{up (1)down (2)}

Read-only

Denotes whether or not a VRF is operational.

A VRF is up(1) when there is at least one interface associated with the VRF whose ifOperStatus is up(1).

A VRF is down(2) when:
  • There does not exist at least one interface whose ifOperStatus is up(1).
  • There are no interfaces associated with the VRF.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.7

mplsL3VpnVrfActiveInterfaces

Gauge32

Read-only

Total number of interfaces connected to this VRF with ifOperStatus = up(1).

This value should increase when an interface is associated with the corresponding VRF and its corresponding ifOperStatus is equal to up(1).

If an interface is associated whose ifOperStatus is not up(1), then the value is not incremented until it transitions to this state.

This value should be decremented when an interface is disassociated with a VRF or the corresponding ifOperStatus transitions out of the up(1) state to any other state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.8

mplsL3VpnVrfAssociatedInterfaces

Unsigned32

Read-only

Total number of interfaces connected to this VRF (independent of ifOperStatus type).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.10

mplsL3VpnVrfConfHighRteThresh

Unsigned32

Read-create

Denotes high-level water marker for the number of routes that this VRF may hold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.11

mplsL3VpnVrfConfMaxRoutes

Unsigned32

Read-create

Denotes maximum number of routes that this VRF is configured to hold.

This value MUST be less than or equal to mplsL3VpnVrfConfMaxPossRts unless it is set to 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.12

mplsL3VpnVrfConfLastChanged

TimeStamp

Read-only

The value of sysUpTime at the time of the last change of this table entry, which includes changes of VRF parameters defined in this table or addition or deletion of interfaces associated with this VRF.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.13

mplsL3VpnVrfConfRowStatus

RowStatus

Read-create

This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except mplsL3VpnVrfConfAdminStatus, mplsL3VpnVrfConfRowStatus, and mplsL3VpnVrfConfStorageType.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.2.2.1.14

mplsL3VpnVrfConfAdminStatus

INTEGER{up(1), read-createready to pass packetsdown(2), can't pass packetstesting(3) in some test mode}

Read-create

Indicates the desired operating status of this VRF.

Currently, the maximum access is read-only.

Currently, only the returned value up is supported.

1.3.6.1.2.1.10.166.11.1.2.2.1.15

mplsL3VpnVrfConfStorageType

StorageType

Read-create

The storage type for this VPN VRF entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.

Currently, the maximum access is read-only.

Currently, only the returned value volatile is supported.

Create Restriction

Allowed

Modify Restriction

Only for VRF description, Max Route Limit.

Delete Restriction

Not Allowed

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 759400

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next