No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mplsL3VpnScalars

mplsL3VpnScalars

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.10.166.11.1.1.1

mplsL3VpnConfiguredVrfs

Unsigned32

Read-only

The number of VRFs that are configured on this node.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.1.2

mplsL3VpnActiveVrfs

Gauge32

Read-only

The number of VRFs that are active on this node.

That is, those VRFs whose corresponding mplsL3VpnVrfOperStatus object value is equal to operational (1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.1.3

mplsL3VpnConnectedInterfaces

Gauge32

Read-only

Total number of interfaces connected to a VRF.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.1.4

mplsL3VpnNotificationEnable

TruthValue

Read-write

If this object is true, then it enables the generation of all notifications defined in this MIB.

This object's value should be preserved across agent reboots.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.1.5

mplsL3VpnVrfConfMaxPossRts

Unsigned32

Read-only

Denotes maximum number of routes that the device will allow all VRFs jointly to hold.

If this value is set to 0, this indicates that the device is unable to determine the absolute maximum.

In this case, the configured maximum MAY not actually be allowed by the device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.1.6

mplsL3VpnVrfConfRteMxThrshTime

Unsigned32

Read-only

Denotes the interval in seconds, at which the route max threshold notification may be reissued after the maximum value has been exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued.

This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value.

If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value.

This is the recommended default behavior.

Currently, only the value 0 is supported.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 672493

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next