No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwQinQSubIfTermTable

hwQinQSubIfTermTable

This table is used to create or delete a QinQ termination setting.

The index of this table is hwQinQSubIfTermIfIndex.hwQinQSubIfTermPEVlan.hwQinQSubIfTermCEVlanStart.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.4.1.1

hwQinQSubIfTermIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of the Sub-interface for QinQ VLAN Tag Termination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.4.1.2

hwQinQSubIfTermPEVlan

VlanId

Not-accessible

This object indicates the PE VLAN ID permitted by the Sub-interface for QinQ VLAN Tag Termination.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.4.1.3

hwQinQSubIfTermCEVlanStart

VlanId

Not-accessible

This object indicates the start VID of the CE VLANs permitted by the Sub-interface for QinQ VLAN Tag Termination.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.4.1.4

hwQinQSubIfTermCEVlanEnd

VlanId

Read-create

This object indicates the end VID of CE VLANs permitted by the Sub-interface for QinQ VLAN Tag Termination.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.4.1.6

hwQinQSubIfTermRowStatus

RowStatus

Read-create

This object indicates the row status.

  • 1: active
  • 2: notInService
  • 3: notReady
  • 4: createAndGo
  • 5: createAndWait
  • 6: destroy

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • The control VLAN on the sub-interface must be specified, and the control VLAN mode must be QinQ.

  • The number of CE VLAN IDs set for the termination of a sub-interface cannot be greater than 64. In the packets received by multiple termination sub-interfaces, CE VLAN IDs cannot overlap when PE VLAN IDs are identical.

For example, if the value of hwQinQSubIfTermPEVlan is set to 100, the value of hwQinQSubIfTermCEVlanStart is set to 500, and the value of hwQinQSubIfTermCEVlanEnd is set to 600, the value of hwQinQSubIfTermPEVlan cannot be set to 100, the value of hwQinQSubIfTermCEVlanStart cannot be set to 300, and the value of hwQinQSubIfTermCEVlanEnd cannot be set to 600. This is because overlapping exists between 300 to 500.

  • A sub-interface can be enabled with one of the three functions, that is, dotq1, QinQ, and VLAN stacking.

For example, if hwQinQSubIfTermTable is created, hwQinQSubIfVlanStackingTable VLAN dot1q cannot be created.

  • The setting of hwQinQSubIfTermPEVlan cannot overlap the setting of hwQinQSubIfVlanStackingCE in hwQinQSubIfVlanStackingTable.

  • Similarly, the setting of hwQinQSubIfTermPEVlan cannot overlap the setting of VLAN ID in the VLAN Type field.

  • If the termination sub-interface supports unicast routes, only one VLAN can be configured.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 734042

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next