No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwKompellaVcTable

hwKompellaVcTable

This table is a VC configuration table. You can create and delete a VC in a VPN by using the table. Currently, this table supports the GET operation, rather than the SET operation.

The indexes of this table are hwKompellaVpnName, hwKompellaCEID, hwKompellaVcRmtCEID, and hwKompellaVcIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.1

hwKompellaVcIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of AC interface.

The value 0 indicates that the index of the interface is invalid.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.2

hwKompellaVcRmtCeID

Unsigned32(size(0..249))

Not-accessible

This object indicates the remote CE ID.

It is a decimal integer that ranges from 0 to 249.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.3

hwKompellaVcInboundLabel

Unsigned32

Read-only

This object indicates the value of the incoming label.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.4

hwKompellaVcOutboundLabel

Unsigned32

Read-only

This object indicates the value of the outgoing label.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.5

hwKompellaVcCtrlWord

HWEnableValue

Read-create

The value of this object identifies whether the control word is enabled. The object has the following values:

  • 1: enable
  • 2: disable

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.6

hwKompellaVcTnlPolicyName

Octet String(size(0..39))

Read-create

This object indicates the name of the tunnel policy used by the Kompella VC.

The name is a string of 1 to 20 characters.

The default value is zero-length.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.7

hwKompellaVcVlanTagMode

Integer{Raw(1),Tagged(2), rawTagNotConfiged(255)}

Read-create

The value of this object identifies the VLAN tag mode. The object has the following values:

  • 1: raw mode
  • 2: tagged mode
  • 255: invalid mode (internetworking)

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.8

hwKompellaVcSecondary

TruthValue

Read-create

The value of this object identifies whether the Kompella VC is backup VC or not. The object has the following values:

  • 1: backup VC
  • 2: non-backup VC

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.10

hwKompellaVCForBFDIndex

Unsigned32

Read-only

This object indicates the index of BFD for PW.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.11

hwKompellaVcOperStatus

Integer{UP(1),DOWN(2)}

Read-only

The value of the object identifies the operating status of the Kompella VC. The object has the following values:

  • 1:up
  • 2:down

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.12

hwKompellaVcRerouteDelayTime

Unsigned32

Read-create

This object indicates the delay time of VC switching.

It is a decimal integer, expressed in milliseconds.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.13

hwKompellaVcRerouteResumeTime

Unsigned32

Read-create

This object indicates the duration of the backup PW being Down after the primary PW goes Up.

The object is a decimal integer, expressed in milliseconds.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.14

hwKompellaVcReroutePolicy

Integer{delay(1), immediately(2), never(3), none(4), err(5), invalid(6), immediatelySwitch(7)}

Read-only

The value of this object indicates the switching policy of VC. The object has the following values:

  • 1: indicates that the switching is Down after a certain period of delay.
  • 2: indicates the immediate switching.
  • 3: indicates that the recovered master VC does not switch to be the master until the backup VC fails.
  • 4: none.
  • 5: indicates that the switching policy is incorrect.
  • 6: indicates that the switching policy is unavailable.
  • 7: indicates that in the PW redundancy scenario, the traffic immediately switches to the master VC after the master VC recovers.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.15

hwKompellaVcRerouteReason

HWL2VpnStateChangeReason

Read-only

This object indicates the reason of VC switching.

For details, see hwKompellaVcStateChangeReason.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.16

hwKompellaVcLastRerouteTime

Unsigned32

Read-only

This object indicates the interval between the switchback time and the current time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.17

hwKompellaVcManualSetFault

TruthValue

Read-only

The value of this object identifies whether the fault flag is manually set. The object has the following values:

  • 1: true
  • 2: false

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.18

hwKompellaVcIsActive

TruthValue

Read-only

The value of this object identifies whether the current VC is in the active state. The object has the following values:

  • 1: true
  • 2: false

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.19

hwKompellaACStatus

INTEGER { up(1), down(2), notify(4), notifyDown(5), downNotify(6) }

Read-only

The value of this object identifies the physical status of the AC interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.21

hwKompellaVcBfdDetectMultiplier

Unsigned32

Read-only

This object indicates the local detection multiple.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.22

hwKompellaVcBfdMinReceiveInterval

Unsigned32

Read-only

This object indicates the interval to receive BFD packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.23

hwKompellaVcBfdMinTransmitInterval

Unsigned32

Read-only

This object indicates the interval to send BFD packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.24

hwKompellaVcDynamicBfdDetect

TruthValue

Read-only

The value of this object identifies whether dynamic BFD for PW is supported.

The object has the following values:

  • 1: true
  • 2: false

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.27

hwKompellaVcPeerAddr

IpAddress

Read-create

Peer PW address of the BGP VLL

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.2.1.4.1.51

hwKompellaVcRowStatus

RowStatus

Read-create

This object indicates the row status of this table.

Restriction:

  • Before creating this table, you must create the VPN that is specified in hwKompellaVpnName.

    Before creating this table, you must create the CE that is specified in hwKompellaVpnName and hwKompellaCeID.

  • After creating this table, you are unable to modify the configuration.

Currently, the maximum access is read-only.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 675201

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next