No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwRsvpTeResvTable

hwRsvpTeResvTable

Information describing the state information displayed by receivers in RESV messages.

The indexes of the table are hwRsvpTeSessionNumber and hwRsvpTeResvNumber.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.3.1.1

hwRsvpTeResvNumber

Gauge32

Not-accessible

The number of this reservation request. This is for SNMP Indexing purposes only and has no relation to any protocol value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.2

hwRsvpTeResvType

SessionType

Read-only

The type of session (IPv4, IPv6, IPv6 with flow information, etc)

Only IPv4 is supported.

1.3.6.1.4.1.2011.5.25.148.1.3.1.3

hwRsvpTeResvDestAddr

OCTET STRING

Read-only

The destination address used by all senders in this session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.4

hwRsvpTeResvSenderAddr

OCTET STRING

Read-only

The source address of the sender selected by this reservation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.5

hwRsvpTeResvDestAddrLength

Integer32

Read-only

The length of the destination address in bits. This is the CIDR Prefix Length, which is 32 bits for IPv4 hosts and multicast addresses.

The value is always set as 32.

1.3.6.1.4.1.2011.5.25.148.1.3.1.6

hwRsvpTeResvSenderAddrLength

Integer32

Read-only

The length of the sender's address in bits. This is the CIDR Prefix Length, which is 32 bits for IPv4 hostsand multicast addresses.

The value is always set as 32.

1.3.6.1.4.1.2011.5.25.148.1.3.1.7

hwRsvpTeResvHopAddr

OCTET STRING

Read-only

The address used by the next RSVP hop (which may be the ultimate receiver)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.8

hwRsvpTeResvHopLih

Integer32

Read-only

The Logical Interface Handle received from the previous RSVP hop (which may be the ultimate receiver).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.9

hwRsvpTeResvInterface

Integer32

Read-only

The ifIndex value of the interface on which this RESV message was most recently received

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.10

hwRsvpTeResvService

QosService

Read-only

The QoS Service classification requested by the receiver.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.11

hwRsvpTeResvTSpecRate

BitRate

Read-only

The Average Bit Rate of the sender's data stream. Within a transmission burst, the arrival rate may be as fast as hwRsvpTeResvTSpecPeakRate (if supported by the service model); however, averaged across two or more burst intervals, the rate should not exceed hwRsvpTeResvTSpecRate.

Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.12

hwRsvpTeResvTSpecPeakRate

BitRate

Read-only

The Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.13

hwRsvpTeResvTSpecBurst

BurstSize

Read-only

The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pacing is at the network's option.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.3.1.14

hwRsvpTeResvTSpecMinTu

MessageSize

Read-only

The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.3.1.15

hwRsvpTeResvTSpecMaxTu

MessageSize

Read-only

The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.16

hwRsvpTeResvRSpecRate

BitRate

Read-only

If the requested service is Guaranteed, as specified by hwRsvpTeResvService, This is the clearing rate that is being requested. Otherwise, it is zero, or the agent may return noSuchValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.17

hwRsvpTeResvRSpecSlack

Integer32

Read-only

If the requested service is Guaranteed, as specified by hwRsvpTeResvService, this is the delay slack. Otherwise, it is zero, or the agent may return noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.3.1.18

hwRsvpTeResvInterval

Integer32

Read-only

The interval between refresh messages as advertised by the Next Hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.20

hwRsvpTeResvShared

TruthValue

Read-only

If TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.21

hwRsvpTeResvExplicit

TruthValue

Read-only

If TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scope Object will contain a list of senders that need to receive this reservation request for the purpose of routing the RESV message.

The value is always set as false.

1.3.6.1.4.1.2011.5.25.148.1.3.1.22

hwRsvpTeResvRsvpHop

TruthValue

Read-only

If TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node believes that the previous IP hop may not be an RSVP hop.

The value is always set as true.

1.3.6.1.4.1.2011.5.25.148.1.3.1.24

hwRsvpTeResvTtl

Integer32

Read-only

The TTL value in the RSVP header that was last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.25

hwRsvpTeResvConfirm

OCTET STRING

Read-only

Receiver's address.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, session must exist.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 734053

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next