No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-L2MULTICAST-MIB

HUAWEI-L2MULTICAST-MIB

Function Overview

The HUAWEI-L2MULTICAST-MIB allows you to query and configure Layer 2 multicast information, including:
  • Basic configuration of IGMP snooping
  • Querier
  • Proxy
  • Static interface configuration
  • IGMP snooping call admission control (CAC)

Root object: 1.3.6.1.4.1.2011.5.25.181 iso(1).org(3).dod(6).internet(1).private (4).enterprises (1).huawei (2011).huaweiMgmt(5).hwDatacomm(25).hwL2MultiCastMIB(181)

Relationships Between Tables

None.

Description of Single Objects

hwIgmpSnoopingEnabled

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.1.1

hwIgmpSnoopingEnabled

EnabledStatus

Read-write

This object indicates that IGMP snooping is enabled or disabled globally. By default, IGMP snooping is disabled globally.

This object is implemented as defined in the corresponding MIB file.

hwSendQueryEnabled

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.1.2

hwSendQueryEnabled

EnabledStatus

Read-write

This object indicates that the Query message sending function is enabled or disabled. By default, this function is disabled.

This object is implemented as defined in the corresponding MIB file.

NOTE:
This object can be set only after IGMP snooping is enabled using hwIgmpSnoopingEnabled.

hwSendQuerySourceIpAddr

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.1.3

hwSendQuerySourceIpAddr

IpAddress

Read-write

This object indicates the source IP address of the General Query messages sent by a device. The value ranges from 0.0.0.1 to 223.255.255.255. The default value is 192.168.0.1.

This object is implemented as defined in the corresponding MIB file.

hwL2mcCacTrapInterval

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.1.4

hwL2mcCacTrapInterval

Integer32

Read-write

This object indicates the interval at which CAC traps are sent. The default value is 0, indicating that traps of the same event are not suppressed and sent continuously.

This object is implemented as defined in the corresponding MIB file.

Description of MIB Tables

hwL2mcCfgTable

This table describes the IGMP snooping configurations in a VLAN or a VSI.

The indexes of this table are hwL2mcVlanIndex and hwL2mcVsiName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.1

hwL2mcVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.2

hwL2mcVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.3

hwL2mcEnabled

EnableStatus

Read-create

This object indicates whether IGMP snooping is enabled in a VLAN or a VSI. By default, IGMP snooping is disabled in a VLAN or VSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.4

hwL2mcRouterAgingTime

Integer32

Read-create

This object indicates the aging time of a router interface. The value ranges from 1 to 1000, in seconds. By default, the aging time of router interfaces that a device learns from IGMP Query messages is 180 seconds, and the aging time of router interfaces that the switch learns from PIM Hello messages is the Holdtime value in PIM Hello packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.5

hwL2mcMaxQueryRespTime

Integer32

Read-create

This object indicates the maximum response time for Query messages. The value ranges from 1 to 25, in seconds. The default value is 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.6

hwL2mcLastMemQueryInterval

Integer32

Read-create

This object indicates the last member query interval. The value ranges from 1 to 5, in seconds. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.7

hwL2mcQueryInterval

Integer32

Read-create

This object indicates the general query interval. The value ranges from 1 to 65535, in seconds. The default value is 60.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.8

hwL2mcRobustCount

Integer32

Read-create

This object indicates the robustness variable. The value ranges from 2 to 5. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.9

hwL2mcCheckRouterAlert

TruthValue

Read-create

This object indicates whether to check the router-alert option in packets. The default value is False, indicating that the switch does not check the router-alert option.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.10

hwL2mcSendRouterAlert

TruthValue

Read-create

This object indicates whether to send packets with the router-alert option. The default value is True, indicating that the switch sends packets with the router-alert option.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.11

hwL2mcIgmpVersion

Integer32

Read-create

This object indicates the version of the IGMP packets. The value ranges from 1 to 3. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.12

hwL2mcFwdMode

Integer32

Read-create

This object indicates the forwarding mode for multicast packets. The value can be:
  • 1: IP address-based forwarding
  • 2: MAC address-based forwarding
The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.13

hwL2mcPromptLeaveEnable

EnableStatus

Read-create

This object indicates whether prompt leave is enabled in a VLAN. By default, prompt leave is disabled in a VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.14

hwL2mcPromptLeaveAclNum

Integer32

Read-create

This object indicates the number of the ACL that specifies the prompt leave conditions. The value ranges from 2000 to 3999. The default value is 0, indicating that no ACL is configured for prompt leave.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.15

hwL2mcRouterPortLearningEnable

EnableStatus

Read-create

This object indicates whether router interface learning is enabled in a VLAN. By default, router interface learning is enabled in a VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.16

hwL2mcReportSuppressEnable

EnableStatus

Read-create

This object indicates whether IGMP Report message suppression is enabled in a VLAN. By default, this function is enabled in a VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.17

hwL2mcIgmpQuerierEnable

EnableStatus

Read-create

This object indicates whether the querier function is enabled in a VLAN. By default, this function is disabled in a VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.18

hwL2mcIgmpSsmMappingEnable

EnableStatus

Read-create

This object indicates whether SSM mapping is enabled in a VLAN. By default, SSM mapping is disabled in a VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.19

hwL2mcSsmAclNum

Integer32

Read-create

This object indicates the number of the ACL that specifies the SSM mapping policy. The value ranges from 2000 to 2999. The default value is 0, indicating that no ACL is configured for SSM mapping.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.100

hwL2mcRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table.

Modification Restriction

The specified VLAN must exist.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The specified VLAN must exist.

hwL2mcStatisticsTable

This table provides statistics about IGMP snooping, including the number of IGMP messages received or sent in a VLAN or a VSI.

The indexes of this table are hwL2mcStatsVlanIndex and hwL2mcStatsVsiName.

OID

Object Name

Syntax

Description

Max Access

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.1

hwL2mcStatsVlanIndex

VlanIdOrAny

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.

Not-accessible

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.2

hwL2mcStatsVsiName

DisplayString

This object indicates a VSI name. If a VLAN is specified, the value is 32.

Not-accessible

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.3

hwL2mcRecvIgmpV1ReportNum

Counter32

This object indicates the number of IGMPv1 Report messages received in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.4

hwL2mcRecvIgmpV2ReportNum

Counter32

This object indicates the number of IGMPv2 Report messages received in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.5

hwL2mcRecvIgmpV3ReportNum

Counter32

This object indicates the number of IGMPv3 Report messages received in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.6

hwL2mcRecvIgmpLeaveNum

Counter32

This object indicates the number of IGMP Leave messages received in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.7

hwL2mcRecvIgmpV1QueryNum

Counter32

This object indicates the number of IGMPv1 Query messages received in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.8

hwL2mcRecvIgmpV2QueryNum

Counter32

This object indicates the number of IGMPv2 Query messages received in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.9

hwL2mcRecvIgmpV3QueryNum

Counter32

This object indicates the number of IGMPv3 Query messages received in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.10

hwL2mcRecvPimHelloNum

Counter32

This object indicates the number of PIM Hello messages received in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.11

hwL2mcSendQueryNum

Counter32

This object indicates the number of IGMP Query messages with the source address 0 sent in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.12

hwL2mcSendQuerySourceNum

Counter32

Indicates the number of IGMP Query messages (the source address is not 0) in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.13

hwL2mcProxyGenQueryNum

Counter32

Indicates the number of Query messages sent by the proxy in a VLAN or a VSI.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.14

hwL2mcProxyGroupQueryNum

Counter32

Indicates the number of Query messages sent by the proxy in a VLAN or a VSI to a specified group.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.15

hwL2mcProxyGroupSourceQueryNum

Counter32

Indicates the number of Query messages sent by the proxy in a VLAN or a VSI to a specified source group.

Read-only

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.3.1.1.30

hwL2mcIgmpPacketClearStats

TruthValue

This object indicates whether to clear the statistics about IGMP snooping.

The value can be:

  • 1: True
  • 2: False

The default value is 2, indicating not to clear statistics about IGMP snooping.

Read-write

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

IGMP snooping must be enabled globally.

hwL2mcFwdTable

This table shows multicast forwarding entries in a VLAN or a VSI.

The indexes of this table are hwL2mcFwdVlanIndex, hwL2mcFwdVsiName, hwL2mcFwdGroupAddress, hwL2mcFwdSourceAddress, hwL2mcFwdPortType, hwL2mcFwdPortIfIndex, hwL2mcFwdPortPeId, hwL2mcFwdPortCeId, hwL2mcFwdPeerAddress, and hwL2mcFwdVcOrSiteId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.1

hwL2mcFwdVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.2

hwL2mcFwdVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.3

hwL2mcFwdGroupAddress

IpAddress

Not-accessible

This object indicates the IP address of a multicast group. In MAC address-based forwarding mode, the group address is the smallest among the 32 IP addresses mapped to a multicast MAC address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.4

hwL2mcFwdSourceAddress

IpAddress

Not-accessible

This object indicates the source IP address of a multicast group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.5

hwL2mcFwdPortType

HWPortType

Not-accessible

This object indicates the type of a member interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.6

hwL2mcFwdPortIfIndex

InterfaceIndexOrZero

Not-accessible

This object indicates an interface index. The value 0 indicates an invalid interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.7

hwL2mcFwdPortPeId

VlanIdOrAny

Not-accessible

This object indicates the PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates an invalid PE VID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.8

hwL2mcFwdPortCeId

VlanIdOrAny

Not-accessible

This object indicates the CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates an invalid CE VID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.9

hwL2mcFwdPeerAddress

IpAddress

Not-accessible

This object indicates the peer IP address of a PW interface. The value 0.0.0.0 indicates an invalid peer IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.10

hwL2mcFwdVcOrSiteId

Integer32

Not-accessible

This object indicates the VC ID or site ID of a PW interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.11

hwL2mcFwdAddressType

Integer32

Read-only

This object indicates whether multicast forwarding is based on IP addresses or MAC addresses. By default, multicast forwarding is based on IP addresses.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.18

hwL2mcFwdHostFlag1

Integer32

Read-only

This object indicates the mode in which multicast member interfaces are created. The value can be:
  • 1: Multicast member interfaces in the VLAN are statically configured.
  • 2: Multicast member interfaces in the VLAN are dynamically learned.
  • 3: The VLAN contains both static and dynamic multicast member interfaces.
  • 4: invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.19

hwL2mcFwdHostFlag2

Integer32

Read-only

This object indicates whether a member interface is created using SSM mapping. The value can be:
  • 1: non-mapping
  • 2: mapping

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.20

hwL2mcFwdHostFlag3

Integer32

Read-only

This object indicates whether a member interface is a router interface. The value can be:
  • 1: interface connected to a host
  • 2: router interface

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.4.1.1.21

hwL2mcFwdHostFlag4

Integer32

Read-only

This object indicates the mode in which (S, G) entries are created. The value can be:
  • 1: (S, G) entries are automatically created on the interface.
  • 2: (S, G) entries are statically configured.
  • 3: The interface has both automatically-created and statically-configured (S, G) entries.

Currently, the value can only be 1, indicating that (S, G) entries are automatically created on the interface.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Entries in this table can be read without restriction.

hwL2mcGroupInfoTable

This table shows information about interfaces in a VLAN or VSI.

The indexes of this table are hwL2mcGroupVlanIndex, hwL2mcGroupVsiName, hwL2mcGroupGroupAddress, hwL2mcGroupSourceAddress, hwL2mcPortType, hwL2mcGroupPortIfIndex, hwL2mcGroupPortPeId, hwL2mcGroupPortCeId, hwL2mcGroupPeerAddress, and hwL2mcGroupVcOrSiteId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.1

hwL2mcGroupVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.2

hwL2mcGroupVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.3

hwL2mcGroupGroupAddress

IpAddress

Not-accessible

This object indicates a multicast group address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.4

hwL2mcGroupSourceAddress

IpAddress

Not-accessible

This object indicates a multicast source address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.5

hwL2mcPortType

HWPortType

Not-accessible

This object indicates the type of a member interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.6

hwL2mcGroupPortIfIndex

InterfaceIndexOrZero

Not-accessible

This object indicates an interface index. The value 0 indicates an invalid interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.7

hwL2mcGroupPortPeId

VlanIdOrAny

Not-accessible

This object indicates the PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates an invalid PE VID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.8

hwL2mcGroupPortCeId

VlanIdOrAny

Not-accessible

This object indicates the CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates an invalid CE VID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.9

hwL2mcGroupPeerAddress

IpAddress

Not-accessible

This object indicates the peer IP address of a PW interface. The value 0.0.0.0 indicates an invalid peer IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.10

hwL2mcGroupVcOrSiteId

Integer32

Not-accessible

This object indicates the VC ID or site ID of a PW interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.14

hwL2mcSourceUpTime

Counter32

Read-only

This object indicates how long an (S, G) entry has exists in the Layer 2 multicast forwarding table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.15

hwL2mcSourceExpires

Counter32

Read-only

This object indicates the aging time of an (S, G) entry in the Layer 2 multicast forwarding table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.16

hwL2mcGroupUpTime

Counter32

Read-only

This object indicates how long a multicast group has exists in the Layer 2 multicast forwarding table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.17

hwL2mcGroupExpires

Counter32

Read-only

This object indicates the aging time of a multicast group in the Layer 2 multicast forwarding table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.18

hwL2mcGroupFilterFlag

INTEGER

Read-only

This object indicates the interface filter mode. The value can be:
  • 1: include
  • 2: exclude
  • 3: invalid

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.19

hwL2mcGroupHostFlag1

INTEGER

Read-only

This object indicates the mode in which multicast member interfaces are created. The value can be:
  • 1: Multicast member interfaces in the VLAN are statically configured.
  • 2: Multicast member interfaces in the VLAN are dynamically learned.
  • 3: The VLAN contains both static and dynamic multicast member interfaces.
  • 4: invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.20

hwL2mcGroupHostFlag2

INTEGER

Read-only

This object indicates whether a member interface is created using SSM mapping. The value can be:
  • 1: non-mapping
  • 2: mapping

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.5.1.1.100

hwL2mcGroupRowStatus

RowStatus

Read-only

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Entries in this table can be read without restriction.

hwL2mcGroupCfgTable

This table allows you to view or configure forwarding entries in a VLAN.

The indexes of this table are hwGroupCfgPortType, hwGroupCfgPortIfIndex, hwGroupCfgPortPeId, hwGroupCfgPortCeId, hwGroupCfgPeerAddress, hwGroupCfgVcOrSiteId, hwGroupCfgVlanIndex, hwGroupCfgVsiName, hwGroupCfgGroupAddress, and hwGroupCfgSourceAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1

hwGroupCfgPortType

HWPortType

Not-accessible

This object indicates the type of a member interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.2

hwGroupCfgPortIfIndex

InterfaceIndexOrZero

Not-accessible

This object indicates an interface index. The value 0 indicates an invalid interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1.3

hwGroupCfgPortPeId

VlanIdOrAny

Not-accessible

This object indicates the PE VID of an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1.4

hwGroupCfgPortCeId

VlanIdOrAny

Not-accessible

This object indicates the CE VID of an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1.5

hwGroupCfgPeerAddress

IpAddress

Not-accessible

This object indicates the peer IP address of a PW interface. The value 0.0.0.0 indicates an invalid peer IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1.6

hwGroupCfgVcOrSiteId

Integer32

Not-accessible

This object indicates the VC ID or site ID of a PW interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1.7

hwGroupCfgVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1.8

DisplayString

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1.9

hwGroupCfgGroupAddress

IpAddress

Not-accessible

This object indicates the IP address of a multicast group. In MAC address-based forwarding mode, the group address is the smallest among the 32 IP addresses mapped to a multicast MAC address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1.10

hwGroupCfgSourceAddress

IpAddress

Not-accessible

This object indicates the source IP address of a multicast group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1.100

hwGroupCfgRowStatus

RowStatus

Read-only

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The specified member interface must be a Layer 2 interface.This table cannot be used to create forwarding entries in a VSI.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entry to be deleted must exist.

Access Restriction

This table cannot be used to view forwarding entries in a VSI.

hwL2mcSsmSourceTable

This table allows you to view or configure source address lists for SSM-Mapping.

The indexes of this table are hwL2mcSsmSourceVlanIndex, hwL2mcSsmSourceVsiName, hwL2mcSsmGroupAddress, hwL2mcSsmGroupLen, and hwL2mcSsmSourceAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.7.1.1.1

hwL2mcSsmSourceVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.7.1.1.2

hwL2mcSsmSourceVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.7.1.1.3

hwL2mcSsmGroupAddress

Integer32

Not-accessible

This object indicates the IP address of a multicast group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.7.1.1.4

hwL2mcSsmGroupLen

Integer32

Not-accessible

This object indicates the mask length of a multicast group address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.7.1.1.5

hwL2mcSsmSourceAddress

IpAddress

Not-accessible

This object indicates the source address of SSM mapping, which is used as an index of this table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.7.1.1.100

hwL2mcSsmSourceRowStatus

Integer32

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

IGMP snooping must be enabled globally.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entry to be deleted must exist.

Access Restriction

Entries in this table can be read without restriction.

hwL2mcChnlCfgTable

This table describes the IGMP snooping configuration on a device.

The indexes of this table are hwChnlCfgVlanIndex, hwChnlCfgVsiName, and hwChnlCfgChnlName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.9.1.1.1

hwChnlCfgVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. If values of hwChnlCfgVlanIndex and hwChnlCfgVsiName are both invalid, the global configuration is displayed. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.9.1.1.2

hwChnlCfgVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32. If values of hwChnlCfgVlanIndex and hwChnlCfgVsiName are both invalid, the global configuration is displayed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.9.1.1.3

hwChnlCfgChnlName

DisplayString

Not-accessible

This object indicates a channel name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.9.1.1.9

hwChnlCfgChnlType

Integer32

Read-create

This object indicates the channel type. The value can be:
  • 1: SSM
  • 2: ASM

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.9.1.1.100

hwChnlCfgRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The VLANIF interface corresponding to the VLAN is not bound to any VSI.

The VLAN is not a super VLAN, user VLAN, or protected VLAN.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

Entries in this table can be read without restriction.

hwL2mcLimitTable

This table describes the IGMP snooping CAC configuration on a switch.

The indexes of this table are hwL2mcLimitVlanIndex, hwL2mcLimitVsiName, and hwL2mcLimitChnlName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.10.1.1.1

hwL2mcLimitVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. If values of hwL2mcLimitVlanIndex and hwL2mcLimitVsiName are both invalid, the global configuration is displayed. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.10.1.1.2

hwL2mcLimitVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32. If values of hwL2mcLimitVlanIndex and hwL2mcLimitVsiName are both invalid, the global configuration is displayed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.10.1.1.3

hwL2mcLimitChnlName

DisplayString

Not-accessible

This object indicates a channel name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.10.1.1.4

hwL2mcLimitMaxEntry

Integer32

Read-create

This object indicates the maximum number of forwarding entries. The value 0 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.10.1.1.5

hwL2mcLimitEntryCnt

Counter32

Read-only

This object indicates the number of current forwarding entries.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.10.1.1.8

hwL2mcLimitAcl

Integer32

Read-create

This object indicates the number of the ACL that specifies the bandwidth limiting conditions. The value ranges from 2000 to 3999. The default value is 0, which is an invalid value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.10.1.1.100

hwL2mcLimitCfgRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The VLANIF interface corresponding to the VLAN is not bound to any VSI.

The VLAN is not a super VLAN, user VLAN, or protected VLAN.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

Entries in this table can be read without restriction.

hwL2mcPortLimitTable

This table describes the IGMP snooping CAC configuration on an interface.

The indexes of this table are hwPortLimitVlanIndex, hwPortLimitVsiName, hwPortLimitPortType, hwPortLimitIfIndex, hwPortLimitPeId, hwPortLimitCeId, hwPortLimitPeerAddress, hwPortLimitVcOrSiteId, and hwPortLimitChnlName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.1

hwPortLimitVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. If values of hwL2mcLimitVlanIndex and hwL2mcLimitVsiName are both invalid, the global configuration is displayed. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.2

hwPortLimitVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32. If values of hwL2mcLimitVlanIndex and hwL2mcLimitVsiName are both invalid, the global configuration is displayed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.3

hwPortLimitPortType

HWPortType

Not-accessible

This object indicates the interface type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.4

hwPortLimitIfIndex

InterfaceIndexOrZero

Not-accessible

This object indicates an interface index. The value 0 indicates an invalid interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.5

hwPortLimitPeId

VlanIdOrAny

Not-accessible

This object indicates the PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates an invalid PE VID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.6

hwPortLimitCeId

VlanIdOrAny

Not-accessible

This object indicates the CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates an invalid CE VID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.7

hwPortLimitPeerAddress

IpAddress

Not-accessible

This object indicates the peer IP address of a PW interface. The value 0.0.0.0 indicates an invalid peer IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.8

hwPortLimitVcOrSiteId

Integer32

Not-accessible

This object indicates the VC ID or site ID of a PW interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.9

hwPortLimitChnlName

DisplayString

Not-accessible

This object indicates a channel name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.10

hwPortLimitAcl

Integer32

Read-create

This object indicates the number of the ACL that specifies the bandwidth limiting conditions. The value ranges from 2000 to 3999. The default value is 0, which is an invalid value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.11

hwPortLimitMaxEntry

Integer32

Read-create

This object indicates the maximum number of forwarding entries on an interface. The value 0 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.12

hwPortLimitEntryCnt

Counter32

Read-only

This object indicates the number of current forwarding entries on an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.13

hwPortLimitMaxBandWidth

Counter32

Read-only

This object indicates the maximum bandwidth on an interface. The value 0 is invalid. The value of this object cannot be set.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.14

hwPortLimitBandWidth

Counter32

Read-only

This object indicates the current bandwidth on an interface. The value of this object cannot be set.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.11.1.1.100

hwPortLimitCfgRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

None.

Modification Restriction

None.

Deletion Restriction

None.

Access Restriction

None.

hwL2mcRouterPortInfoTable

This table shows information about router interfaces in a VLAN or VSI.

The indexes of this table are hwL2mcRouterPortVlanIndex, hwL2mcRouterPortVsiName, hwL2mcRouterPortType, hwL2mcRouterPortIfIndex, hwL2mcRouterPortPeId, hwL2mcRouterPortCeId, hwL2mcRouterPortPeerAddress, and hwL2mcRouterPortVcOrSiteId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.1

hwL2mcRouterPortVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.2

hwL2mcRouterPortVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.3

hwL2mcRouterPortType

HWPortType

Not-accessible

This object indicates the interface type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.4

hwL2mcRouterPortIfIndex

InterfaceIndexOrZero

Not-accessible

This object indicates an interface index. The value 0 indicates an invalid interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.5

hwL2mcRouterPortPeId

VlanIdOrAny

Not-accessible

This object indicates the PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates an invalid PE VID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.6

hwL2mcRouterPortCeId

VlanIdOrAny

Not-accessible

This object indicates the CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates an invalid CE VID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.7

hwL2mcRouterPortPeerAddress

IpAddress

Not-accessible

This object indicates the peer IP address of a PW interface. The value 0.0.0.0 indicates an invalid peer IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.8

hwL2mcRouterPortVcOrSiteId

Integer32

Not-accessible

This object indicates the VC ID or site ID of a PW interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.16

hwL2mcRouterPortGroupUpTime

Counter32

Read-only

This object indicates how long a multicast group has exists in the forwarding entry.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.17

hwL2mcRouterPortGroupExpires

Counter32

Read-only

This object indicates the aging time of a multicast group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.13.1.1.19

hwL2mcRouterPortGroupHostFlag1

Integer32

Read-only

This object indicates the mode in which router interfaces in the VLAN are created. The value can be:
  • 1: Router interfaces in the VLAN are statically configured.
  • 2: Router interfaces in the VLAN are dynamically learned.
  • 3: The VLAN contains both static and dynamic multicast router interfaces.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Entries in this table can be read without restriction.

hwL2mcRouterPortCfgTable

This table allows you to view or configure router interfaces in a VLAN.

The indexes of this table are hwL2mcRouterPortCfgPortType, hwL2mcRouterPortCfgPortIfIndex, hwL2mcRouterPortCfgPortPeId, hwL2mcRouterPortCfgPortCeId, hwL2mcRouterPortCfgPeerAddress, hwL2mcRouterPortCfgVcOrSiteId, hwL2mcRouterPortCfgVlanIndex, and hwL2mcRouterPortCfgVsiName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.14.1.1.1

hwL2mcRouterPortCfgPortType

HWPortType

Not-accessible

This object indicates the interface type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.14.1.1.2

hwL2mcRouterPortCfgPortIfIndex

InterfaceIndexOrZero

Not-accessible

This object indicates an interface index. The value 0 indicates an invalid interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.14.1.1.3

hwL2mcRouterPortCfgPortPeId

VlanIdOrAny

Not-accessible

This object indicates the PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates an invalid PE VID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.14.1.1.4

hwL2mcRouterPortCfgPortCeId

VlanIdOrAny

Not-accessible

This object indicates the CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates an invalid CE VID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.14.1.1.5

hwL2mcRouterPortCfgPeerAddress

IpAddress

Not-accessible

This object indicates the peer IP address of a PW interface. The value 0.0.0.0 indicates an invalid peer IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.14.1.1.6

hwL2mcRouterPortCfgVcOrSiteId

Integer32

Not-accessible

This object indicates the VC ID or site ID of a PW interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.14.1.1.7

hwL2mcRouterPortCfgVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.14.1.1.8

hwL2mcRouterPortCfgVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.14.1.1.100

hwL2mcRouterPortCfgRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

If a main interface is specified, the interface must be a Layer 2 interface.

If a sub-interface is specified, the interface must be bound to a VSI.

If a QinQ interface is specified, the interface must exist.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entry to be deleted must exist.

Access Restriction

Entries in this table can be read without restriction.

hwL2mcChnlGroupCfgTable

This table describes the multicast group configuration of a CAC channel in a VLAN or VSI.

The indexes of this table are hwChnlGroupCfgVlanIndex, hwChnlGroupCfgVsiName, hwChnlCfgGroupChnlName, hwChnlGroupCfgGroupAddress, hwChnlGroupCfgGroupLen, hwChnlGroupCfgSourceAddress, and hwChnlGroupCfgSourceLen.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.15.1.1.1

hwChnlGroupCfgVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. If values of hwChnlCfgVlanIndex and hwChnlCfgVsiName are both invalid, the global configuration is displayed. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.15.1.1.2

hwChnlGroupCfgVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32. If values of hwChnlCfgVlanIndex and hwChnlCfgVsiName are both invalid, the global configuration is displayed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.15.1.1.3

hwChnlCfgGroupChnlName

DisplayString

Not-accessible

This object indicates a channel name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.15.1.1.4

hwChnlGroupCfgGroupAddress

IpAddress

Not-accessible

This object indicates a multicast group address. If multicast packets are forwarded based on MAC addresses, 32 multicast IP addresses are mapped to one multicast MAC address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.15.1.1.5

hwChnlGroupCfgGroupLen

Integer32

Not-accessible

This object indicates the mask length of a multicast group address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.15.1.1.6

hwChnlGroupCfgSourceAddress

IpAddress

Not-accessible

This object indicates a multicast source address. The value 0.0.0.0 indicates an invalid multicast source address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.15.1.1.7

hwChnlGroupCfgSourceLen

Integer32

Not-accessible

This object indicates the mask length of a multicast source address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.15.1.1.9

hwChnlGroupCfgPerBand

Integer32

Read-create

This object indicates the bandwidth of the channel. The value of this object cannot be set.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.15.1.1.100

hwChnlGroupCfgRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The specified VSI must exist.

The VLANIF interface corresponding to the specified VLAN is not bound to any VSI.

The VLAN is not a super VLAN, user VLAN, or protected VLAN.

The specified channel must exist.

Modification Restriction

The entry to be deleted must exist.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

Entries in this table can be read without restriction.

hwL2mcGroupPolicyCfgTable

This table allows you to view or configure group policies in a VLAN or VSI.

The indexes of this table are hwGroupPolicyVlanIndex and hwGroupPolicyVsiName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.16.1.1.1

hwGroupPolicyVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.16.1.1.2

hwGroupPolicyVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.16.1.1.3

hwGroupPolicyAclNum

Integer32

Read-create

This object indicates the number of the ACL referenced by a group policy. The value ranges from 2000 to 3999. The default value is 0, which is an invalid value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.16.1.1.4

hwGroupPolicyIgmpVersion

INTEGER

Read-create

This object indicates the IGMP version. The value ranges from 1 to 4. The default value is 4, indicating that no IGMP version is specified.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.16.1.1.100

hwGroupPolicyRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The specified VLAN or VSI must exist.

Modification Restriction

The entry to be deleted must exist.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The specified VLAN or VSI must exist.

hwL2mcChnlDenyCfgTable

This table describes the IGMP snooping configuration in a VLAN.

The indexes of this table are hwChnlDenyCfgVlanIndex and hwChnlDenyCfgVsiName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.17.1.1.1

hwChnlDenyCfgVlanIndex

VlanIdOrAny

Not-accessible

This object indicates the VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If hwChnlDenyCfgVlanIndex and hwChnlDenyCfgVsiName are of invalid values, it indicates the global configuration. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.17.1.1.2

hwChnlDenyCfgVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the name character defaults to be 32. If hwChnlDenyCfgVlanIndex and hwChnlDenyCfgVsiName are of invalid values, it indicates the global configuration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.17.1.1.3

hwChnlDenyCfg

Integer32

Read-create

This object indicates whether the switch discards packets of unknown channels. The value can be:
  • 1: The switch does not discard packets of unknown channels.
  • 2: The switch discards packets of unknown channels.
By default, the switch discards packets of unknown channels.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.17.1.1.100

hwChnlDenyCfgRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The VLANIF interface corresponding to the specified VLAN is not bound to any VSI.

The VLAN is not a super VLAN, user VLAN, or protected VLAN.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

Entries in this table can be read without restriction.

Unsupported Objects

The device does not support the functions mapping the objects listed in following table. Do not use these objects to maintain the device.

Table 69-1  List of unsupported objects

Object OID

Object Name

Table Containing the Object

1.3.6.1.4.1.2011.5.25.181.1.8.1

hwL2mcPortGroupPolicyCfgTable

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.1

hwPortGroupPolicyPortType

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.2

hwPortGroupPolicyPortIfIndex

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.3

hwPortGroupPolicyPortPeId

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.4

hwPortGroupPolicyPortCeId

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.5

hwPortGroupPolicyPeerAddress

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.6

hwPortGroupPolicyVcOrSiteId

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.7

hwPortGroupPolicyVlanIndex

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.8

hwPortGroupPolicyVsiName

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.9

hwPortGroupPolicyAclNum

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.10

hwPortGroupPolicyIgmpVersion

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.8.1.1.100

hwPortGroupPolicyRowStatus

hwL2mcPortGroupPolicyCfgTable

1.3.6.1.4.1.2011.5.25.181.1.10.1.1.6

hwL2mcLimitMaxBandWidth

hwL2mcLimitTable

1.3.6.1.4.1.2011.5.25.181.1.10.1.1.7

hwL2mcLimitBandWidth

hwL2mcLimitTable

1.3.6.1.4.1.2011.5.25.181.1.12.1

hwL2mcFastChnlCfgTable

hwL2mcFastChnlCfgTable

1.3.6.1.4.1.2011.5.25.181.1.12.1.1.1

hwL2mcFastChnlCfgVlanIndex

hwL2mcFastChnlCfgTable

1.3.6.1.4.1.2011.5.25.181.1.12.1.1.2

hwL2mcFastChnlCfgVsiName

hwL2mcFastChnlCfgTable

1.3.6.1.4.1.2011.5.25.181.1.12.1.1.3

hwL2mcFastChnlCfgGroupAddress

hwL2mcFastChnlCfgTable

1.3.6.1.4.1.2011.5.25.181.1.12.1.1.4

hwL2mcFastChnlCfgGroupLen

hwL2mcFastChnlCfgTable

1.3.6.1.4.1.2011.5.25.181.1.12.1.1.5

hwL2mcFastChnlCfgSourceAddress

hwL2mcFastChnlCfgTable

1.3.6.1.4.1.2011.5.25.181.1.12.1.1.6

hwL2mcFastChnlCfgSourceLen

hwL2mcFastChnlCfgTable

1.3.6.1.4.1.2011.5.25.181.1.12.1.1.100

hwL2mcFastChnlCfgRowStatus

hwL2mcFastChnlCfgTable

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178122

Views: 785683

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next