No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hw2gRadioProfileTable

hw2gRadioProfileTable

This table is used to configure 2.4 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan and RRM profiles.

The index of this table is hw2gRadioProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.16.1.1

hw2gRadioProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a 2G radio profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.6

hw2gRadioBeaconInterval

Unsigned32(60–1000)

read-write

This object indicates a Beacon interval. The default value is 100, in TUs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.10

hw2gRadioGuardIntervalMode

INTEGER{short(1),normal(2)}

read-write

This object indicates the GI mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.11

hw2gRadioShortPreamble

INTEGER{disable(1),enable(2)}

read-write

This object indicates the preamble mode. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.12

hw2gRadioFragmentationThreshold

Integer32(256–2346)

read-write

This object indicates the packet fragmentation threshold, in bytes. The default value is 2346.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.13

hw2gRadioHtAmpduSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the aggregation function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.14

hw2gRadioHtAmpduMaxLengthExponent

Integer32(0–3)

read-write

This object indicates the maximum length of frames converged by an MPDU. The default value is 3.

  • 0: 8191 bytes
  • 1: 16383 bytes
  • 2: 32767 bytes
  • 3: 65535 bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.15

hw2gRadioDot11bgBasicRate

Unsigned32(1–4095)

read-write

This object indicates the basic rate set of the 802.11bg protocol. The default value is 3.

This object is in bitmap format. The bit value 1 indicates a corresponding rate:

  • bit0 (1): 1 Mbit/s
  • bit1 (1): 2 Mbit/s
  • bit2 (1): 5.5 Mbit/s
  • bit3 (1): 6 Mbit/s
  • bit4 (1): 9 Mbit/s
  • bit5 (1): 11 Mbit/s
  • bit6 (1): 12 Mbit/s
  • bit7 (1): 18 Mbit/s
  • bit8 (1): 24 Mbit/s
  • bit9 (1): 36 Mbit/s
  • bit10 (1): 48 Mbit/s
  • bit11 (1): 54 Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.16

hw2gRadioDot11bgSupportRate

Unsigned32(1–4095)

read-write

This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFFF.

This object is in bitmap format. The bit value 1 indicates a corresponding rate:

  • bit0 (1): 1 Mbit/s
  • bit1 (1): 2 Mbit/s
  • bit2 (1): 5.5 Mbit/s
  • bit3 (1): 6 Mbit/s
  • bit4 (1): 9 Mbit/s
  • bit5 (1): 11 Mbit/s
  • bit6 (1): 12 Mbit/s
  • bit7 (1): 18 Mbit/s
  • bit8 (1): 24 Mbit/s
  • bit9 (1): 36 Mbit/s
  • bit10 (1): 48 Mbit/s
  • bit11 (1): 54 Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.17

hw2gRadioMulticastRate

Unsigned32

read-write

This object indicates the multicast rate.The default value is 65535, indicating auto-sensing.

  • 0: 1 Mbit/s
  • 1: 2 Mbit/s
  • 2: 5.5 Mbit/s
  • 3: 6 Mbit/s
  • 4: 9 Mbit/s
  • 5: 11 Mbit/s
  • 6: 12 Mbit/s
  • 7: 18 Mbit/s
  • 9: 24 Mbit/s
  • 11: 36 Mbit/s
  • 12: 48 Mbit/s
  • 13: 54 Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.18

hw2gRadioWmmMandatorySwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the mandatory WMM matching function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.19

hw2gRadioApEDCAVoiceECWmax

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.20

hw2gRadioApEDCAVoiceECWmin

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.21

hw2gRadioApEDCAVoiceAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.22

hw2gRadioApEDCAVoiceTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.23

hw2gRadioApEDCAVoiceAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.24

hw2gRadioApEDCAVideoECWmax

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.25

hw2gRadioApEDCAVideoECWmin

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.26

hw2gRadioApEDCAVideoAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.27

hw2gRadioApEDCAVideoTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.28

hw2gRadioApEDCAVideoAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.29

hw2gRadioApEDCABEECWmax

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.30

hw2gRadioApEDCABEECWmin

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.31

hw2gRadioApEDCABEAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.32

hw2gRadioApEDCABETXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit for BE services on APs. It indicates the transmission opportunity limit. The default value is 0. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.33

hw2gRadioApEDCABEAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.34

hw2gRadioApEDCABKECWmax

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.35

hw2gRadioApEDCABKECWmin

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.36

hw2gRadioApEDCABKAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.37

hw2gRadioApEDCABKTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.38

hw2gRadioApEDCABKAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.39

hw2gRadioWmmSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the WMM function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.40

hw2gRadioRtsCtsThreshold

Unsigned32(64–2347)

read-write

This object indicates the request To Send/Clear To Send (RTS/CTS) threshold, in bytes. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 1400.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.41

hw2gRadioRtsCtsMode

INTEGER{disable(1),ctsToSelf(2),rtsCts(3)}

read-write

This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.42

hw2gRadioPowerAutoAdjustSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the user-by-user power control function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.43

hw2gRadioBeamformingSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the beamforming function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.44

hw2gRadioWifiLight

INTEGER{signalStrength(1),traffic(2)}

read-write

This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1.

NOTE:
  • If Mesh is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the AP with the weakest signal among received signals from all neighboring APs.
  • If WDS is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the connected WDS AP.
  • For a Leaf AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP.
  • For a Middle AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Root AP.
  • For a root AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP with the weakest signal.
  • If WDS or Mesh is not enabled on an AP, the Wireless indicator blinking frequency reflects the service traffic volume on the radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.45

hw2gRadioChannelSwitchAnnouncementSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the channel switchover announcement function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.46

hw2gRadioChannelSwitchMode

INTEGER{continueTransmitting(1),stopTransmitting(2)}

read-write

This object indicates the channel switch announcement mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.47

hw2gRadioAutoOffServiceSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the scheduled radio disabling function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.48

hw2gRadioAutoOffServiceStartTime

OCTET STRING

read-write

This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss.

NOTE:
  • hh specifies the hour. The value is an integer that ranges from 0 to 23.
  • mm specifies the minute. The value is an integer that ranges from 0 to 59.
  • ss specifies the second. The value is an integer that ranges from 0 to 59.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.49

hw2gRadioAutoOffServiceEndTime

OCTET STRING

read-write

This object indicates the end time for disabling the radio. The value is in the format of hh:mm:ss.

NOTE:
  • hh specifies the hour. The value is an integer that ranges from 0 to 23.
  • mm specifies the minute. The value is an integer that ranges from 0 to 59.
  • ss specifies the second. The value is an integer that ranges from 0 to 59.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.50

hw2gRadioInterferenceDetectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the user-by-user power control function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.51

hw2gRadioInterferenceIntraFrequencyThreshold

Unsigned32(1–100)

read-write

This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.52

hw2gRadioInterferenceAdjacentFrequencyThreshold

Unsigned32(1–100)

read-write

This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.53

hw2gRadioInterferenceStationThreshold

Unsigned32(1–256)

read-write

This object indicates the alarm threshold for adjacent-channel interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC.

The default value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.54

hw2gRadioRrmProfile

OCTET STRING(1–35)

read-write

This object indicates the bound RRM profile. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.55

hw2gRadioAirScanProfile

OCTET STRING(1–35)

read-write

This object indicates the bound air scan profile. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.56

hw2gRadioProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.57

hw2gRadioProfileUtmostPowerSwitch

{disable(1),enable(2)}

read-write

This object indicates whether the function of sending packets at the maximum power is enabled on a radio under the country code of China. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.58

hw2gRadioProfileConfigEIRP

Unsigned32(1–127)

read-write

This object indicates the transmit power of a radio configured in the radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.59

hw2gRadioProfileRadioType

INTEGER{dot11b(1),dot11g(5),dot11n(9)}

read-write

This object indicates the radio type in a 2G radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.64

hw2gRadioAgileAntennaPolarSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether self-adaptive polarization for an agile antenna is enabled in the 2G profile. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.65

hw2gRadioProfileCCAThreshold

Integer32(-85..-40,0)

read-write

This object indicates the CCA threshold. The default value is 0, indicating that no CCA threshold is configured.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.66

hw2gRadioProfileSmartAntennaLowPerThreshold

Unsigned32(10–30)

read-write

This object indicates the lower valid PER threshold in the smart antenna algorithm. The default value is 20, in percentage. In addition, the value must be a multiple of 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.67

hw2gRadioProfileSmartAntennaHighPerThreshold

Unsigned32(50–90)

read-write

This object indicates the upper valid PER threshold in the smart antenna algorithm. The default value is 80, in percentage. In addition, the value must be a multiple of 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.68

hw2gRadioProfileSmartAntennaTrainingInterval

Unsigned32(10–600,0)

read-write

This object indicates the smart antenna training interval. The default value is 0, indicating that the antenna works in self-adaptation mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.69

hw2gRadioProfileSmartAntennaTrainingMPDUNum

Unsigned32(10–1000)

read-write

This object indicates the number of MPDUs sent by an AP to a STA during smart antenna training. The default value is 640.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.70

hw2gRadioProfileSmartAntThruputTrainThreshold

Unsigned32(10–50)

read-write

This object indicates the sudden performance change threshold that triggers antenna training. The default value is 10, in percentage. In addition, the value must be a multiple of 10.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table without restriction.

Modification Restriction

  • The air scan and RRM profiles to be bound must already exist.
  • hw2gRadioApEDCAVoiceECWmax and hw2gRadioApEDCAVoiceECWmin must be configured at the same time.
  • hw2gRadioApEDCABEECWmax and hw2gRadioApEDCABEECWmin must be configured at the same time.
  • hw2gRadioAutoOffServiceStartTime and hw2gRadioAutoOffServiceEndTime must be configured at the same time.

Deletion Restriction

The default profile cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 732021

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next