No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwApSystemProfileTable

hwApSystemProfileTable

This table is used to create or delete an AP system profile and configure AP attributes.

The index of this table is hwApSystemProfName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.12.1.1

hwApSystemProfName

OCTET STRING(1–35)

not-accessible

This object indicates the name of an AP system profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.4

hwApProfSampleTime

Unsigned32(2–300)

read-write

This object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.5

hwApProfLedSwitch

INTEGER{off(1),on(2)}

read-write

This object indicates whether to enable the AP's LED indicator. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.7

hwApProfMtu

Unsigned32(1500–1700)

read-write

This object indicates the MTU of the management VLANIF on an AP. The default value is 1500.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.8

hwApProfMeshRole

INTEGER{mp(1),mpp(2)}

read-write

This object indicates a Mesh role. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.9

hwApProfTemporaryManagement

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the AP-based offline VAP switch. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.10

hwApProfManagementVlan

Unsigned32(1–4094|0xFFFFFFFF)

read-write

This object indicates the management VLAN for APs. The default value is 0xFFFFFFFF.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.11

hwApProfHighTempThreshold

Unsigned32(20–110|0xFFFFFFFF)

read-write

This object indicates the high temperature alarm threshold of an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP.

NOTE:
System thresholds vary with different AP types. For details, see AP device information.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.12

hwApProfLowTempThreshold

Integer32(-70–10|0xFFFF)

read-write

This object indicates the low temperature alarm threshold of an AP. The default value 0xFFFF indicates the system threshold of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.17

hwApProfMemoryUsageThreshold

Unsigned32(30–100)

read-write

This object indicates the memory usage alarm threshold of an AP. The default value is 80, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.18

hwApProfCpuUsageThreshold

Unsigned32(50–100)

read-write

This object indicates the CPU usage alarm threshold of an AP. The default value is 90, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.19

hwApProfTelnetSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable Telnet. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.20

hwApProfSTelnetSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable SSH. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.21

hwApProfConsoleSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable the console. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.22

hwApProfLogRecordLevel

INTEGER{emergency(1),alert(2),critical(3),error(4),warning(5),notice(6),info(7),debug(8)}

read-write

This object indicates the log backup level. The default value is 7.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.23

hwApProfLogServerIp

IpAddress

read-write

This object indicates the IP address of the log server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.25

hwApProfAlarmRestrictionSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the alarm suppression switch. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.26

hwApProfAlarmRestrictionPeriod

Unsigned32(10–300)

read-write

This object indicates the alarm suppression period. The default value is 60, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.27

hwApProfKeepServiceSwitch

INTEGER{enable(1),disable(2),allowaccess(3),allowAccessAlsoNoauth(4)}

read-write

This object indicates whether to enable the offline service retaining function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.28

hwApProfProtectPriority

Unsigned32(0–7|0xFFFFFFFF)

read-write

This object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.29

hwApProfProtectACIp

IpAddress

read-write

This object indicates the IP address of the standby AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.31

hwApProfEapStartMode

INTEGER{broadcast(1),multicast(2),unicast(3)}

read-write

This object indicates the EAP Start packet conversion mode. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.32

hwApProfEapStartTransform

INTEGER{equalBssid(1),always(2)}

read-write

This object indicates the EAP Start packet conversion mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.33

hwApProfEapStartUnicastMac

MacAddress

read-write

This object indicates that EAP Start packets are converted to those with specific MAC addresses.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.34

hwApProfEapResponseMode

INTEGER{broadcast(1),multicast(2),specific(3),learning(4)}

read-write

This object indicates the EAP Response packet conversion mode. The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.35

hwApProfEapResponseTransform

INTEGER{equalBssid(1),always(2)}

read-write

This object indicates the EAP Response packet conversion mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.36

hwApProfEapResponseUnicastMac

MacAddress

read-write

This object indicates that EAP Response packets are converted to those with specific MAC addresses.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.37

hwApProfLldpRestartDelay

Unsigned32(1–10)

read-write

This object indicates the delay for re-enabling LLDP. The default value is 2, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.38

hwApProfLldpAdminStatus

INTEGER{txrx(1),rx(2),tx(3)}

read-write

This object indicates the operation mode of LLDP. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.39

hwApProfLldpRetransDelay

Unsigned32(1–8192)

read-write

This object indicates the message retransmitting delay. The default value is 2, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.40

hwApProfLldpRetransHoldMultiplier

Unsigned32(2–10)

read-write

This object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.41

hwApProfLldpInterval

Unsigned32(5–32768)

read-write

This object indicates the interval at which LLDP packets are sent. The default value is 30, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.42

hwApProfLldpReportInterval

Unsigned32(5–3600)

read-write

This object indicates the interval at which LLDP packets are reported. The default value is 30, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.43

hwApProfStaAccessMode

INTEGER{unknown(-1),disable(1),blacklist(2),whitelist(3)}

read-write

This object indicates the access mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.44

hwApProfStaAccessModeProfile

OCTET STRING(0–35)

read-write

This object indicates blacklist and whitelist profiles.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.45

hwApProfRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.46

hwApProfSFTPSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable the SFTP. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.47

hwApProfDynamicBlackListAgingTime

Unsigned32(180–3600)

read-write

This object indicates the aging time of the dynamic blacklist entries. The default value is 600, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.48

hwApProfAntennaOutputMode

INTEGER{combine(1), split(2)}

read-write

This object indicates the output mode of a 2.4 GHz or 5 GHz antenna. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.49

hwApProfMppActiveReselectionSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether active MPP reselection is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.50

hwApProfSpectrumServerIPAddress IpAddress read-write

This object indicates the IPv4 address of the spectrum analysis server. By default, the IPv4 address 255.255.255.255 is used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.52

hwApProfSpectrumServerPort Unsigned32 (0,5000–65535) read-write

This object indicates the port of the spectrum analysis server. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.53

hwApProfSpectrumViaACSwitch INTEGER{disable(1),enable(2)} read-write

This object indicates the status of the spectrum analysis function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.54

hwApProfSpectrumViaACPort Unsigned32 (0,5000–65535) read-write

This object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.55

hwApProfSpectrumNonWifiDeviceAgingTime Unsigned32 (1–30) read-write

This object indicates the aging time of non-WLAN devices on the AC. The default value is 3, in minutes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.56

hwApProfPoeMaxPower

Unsigned32(15400–380000)

read-write

This object indicates the maximum output power of the central AP.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.57

hwApProfPoePowerReserved

Unsigned32(0–100|255)

read-write

This object indicates the percentage of the reserved PoE power against the total PoE power on the central AP. The default value is 255.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.58

hwApProfPoePowerThreshold

Unsigned32(0–100|255)

read-write

This object indicates the alarm threshold of PoE power consumption percentage on the central AP. The default value is 255.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.59

hwApProfPoeAfInrushSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the IEEE 802.3at-compliant central AP is enabled to provide power in accordance with IEEE 802.3af. The default value is 1.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.60

hwApProfPoeHighInrushSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the central AP is enabled to allow high inrush current during power-on. The default value is 1.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.61

hwApProfPrimaryLinkIPv4

IpAddress

read-write

This object indicates the IPv4 address of the primary AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.63

hwApProfBackupLinkIPv4

IpAddress

read-write

This object indicates the IPv4 address of the standby AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.65

hwApProfLedOffTimeRange

OCTET STRING

read-write

This object indicates that the RU indicators are turned off in a specified period.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.66

hwApProfUsbSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable USB. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.77

hwApProfTemporaryManagementPsk

OCTET STRING(6|8–108)

read-write

This object indicates the password for logging in to the offline management VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.78

hwApProfProtectLinkSwitchMode Unsigned32{priority(1)|network-stabilization(2)}

read-write

This object indicates the active/standby link switchover mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.79

hwApProfProtectLinkSwitchEchoProbeTime Unsigned32

read-write

This object indicates the number of Echo probe packets sent within a statistics collection interval.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.80

hwApProfProtectLinkSwitchStartThreshold Unsigned32

read-write

This object indicates the packet loss rate start threshold for an active/standby link switchover.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.81

hwApProfProtectLinkSwitchGapThreshold Unsigned32

read-write

This object indicates the packet loss rate difference threshold for an active/standby link switchover.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.82 hwApProfCardConnectType INTEGER{serial(1),ethernet(2)}

read-write

This object indicates the connection type between an IoT card and an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.83 hwApProfLldpReportEnable

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether an AP is enabled to report information about its LLDP neighbors.

The default value is 1.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

When creating an entry in this table, specify hwApSystemProfName and hwApProfRowStatus. You can create entries in this table when the hwApProfRowStatus value is createAndGo(4).

Modification Restriction

hwApProfEapStartMode and hwApProfEapStartUnicastMac must be configured at the same time. hwApProfEapResponseMode and hwApProfEapResponseUnicastMac must be configured at the same time. When the hwApProfStaAccessMode value is enable, the hwApProfStaAccessModeProfile value must be configured at the same time. hwApProfSpectrumViaACPort and hwApProfSpectrumViaACSwitch must be configured at the same time. hwApProfSpectrumServerIPAddress (or hwApProfSpectrumServerIPv6Address) and hwApProfSpectrumServerPort must be configured at the same time.

Deletion Restriction

The default profile cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 733780

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next