No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This is a table of sessions between the LDP entities and LDP peers. Each row in this table represents a single session.

The index of this table is that of mplsLdpPeerTable.


Object Name


Max Access


Implemented Specifications




The value of sysUpTime at the time this Session entered its current state as denoted by the mplsLdpSessionState object.

This object is implemented as defined in the corresponding MIB files.


INTEGER {nonexistent(1),initialized(2),openrec(3),opensent(4),operational(5)}


The current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior.

This object is implemented as defined in the corresponding MIB files.


INTEGER {unknown(1),active(2),passive(3)}


During session establishment the LSR/LER takes either the active role or the passive role based on address comparisons. This object indicates whether this LSR/LER was behaving in an active role or passive role during this session's establishment.

The value of unknown(1), indicates that the role cannot be determined at the present time.

This object is implemented as defined in the corresponding MIB files.




The version of the LDP Protocol which this session is using. This is the version of the LDP protocol which has been negotiated during session initialization.

This object is implemented as defined in the corresponding MIB files.




The keep alive hold time remaining for this session.

This object is implemented as defined in the corresponding MIB files.


Unsigned32 (1..65535)


The negotiated KeepAlive Time which represents the number of seconds between keep alive messages. The mplsLdpEntityKeepAliveHoldTimer related to this Session is the value that was proposed as the KeepAlive Time for this session.

This value is negotiated during session initialization between the entity's proposed value (that is, the value configured in mplsLdpEntityKeepAliveHoldTimer) and the peer's proposed KeepAlive Hold Timer value. This value is the smaller of the two proposed values.

Currently, the value range of 1 to 21845 is supported.


Unsigned32 (1..65535)


The value of maximum allowable length for LDP PDUs for this session. This value may have been negotiated during the Session Initialization. This object is related to the mplsLdpEntityMaxPduLength object.

The mplsLdpEntityMaxPduLength object specifies the requested LDP PDU length, and this object reflects the negotiated LDP PDU length between the Entity and the Peer.

Currently, the value range of 256 to 4096 is supported.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The session relationship must be set up between this device and neighbor device.

Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 751215

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next