No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

S1720, S2700, S5700, and S6720 V200R011C10

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controllable Multicast Configuration Commands

Controllable Multicast Configuration Commands

Command Support

Commands provided in this section and all the parameters in the commands are supported by all switch models by default, unless otherwise specified. For details, see specific commands.

add multicast-group

Function

The add multicast-group command adds multicast groups to a multicast group list.

The undo add multicast-group command removes multicast groups from a multicast group list.

By default, no multicast group is contained in a multicast group list.

Format

add multicast-group { name group-name | index start-index to end-index }

undo add multicast-group { name group-name | index start-index to end-index }

Parameters

Parameter

Description

Value

name group-name

Specifies the name of a multicast group.

The value is a string of 1 to 31 case-insensitive characters without spaces.

index start-index to end-index

Specifies the index of a multicast group. start-index specifies the start index of a multicast group, and end-index specifies the end index of a multicast group.

It is an integer that ranges from 1 to 1024.

Views

Multicast group list view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

A multicast group is at the lowest level of the three-level control mechanism for controllable multicast. A multicast group corresponds to a multicast address such as 224.1.1.1. A multicast group can be regarded as a channel or program of IPTV. When configuring controllable multicast, you must create a multicast group and add the group to a multicast group list.

Prerequisites

The specified multicast group has been created.

Example

# Add the multicast group named huawei to the multicast group list list1.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-group huawei ip-address 225.1.1.1
[HUAWEI-btv] multicast-list list1
[HUAWEI-btv-list-list1] add multicast-group name huawei

# Add the multicast groups whose indexes range from 2 to 4 to the multicast group list list1.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-list list1
[HUAWEI-btv-list-list1] add multicast-group index 2 to 4

add multicast-list

Function

The add multicast-list command adds multicast group lists in a multicast profile.

The undo add multicast-list command removes multicast group lists from a multicast profile.

By default, no multicast group list is referenced in a multicast profile.

Format

add multicast-list { name list-name | index start-index to end-index } { preview | watch }

undo add multicast-list { name list-name | index start-index to end-index }

Parameters

Parameter

Description

Value

name list-name

Indicates the name of a multicast group list.

The value is a string of 1 to 31 case-insensitive characters without spaces.

index start-index to end-index

Specifies the index of a multicast group list. start-index specifies the start index of a multicast group list, and end-index specifies the end index of a multicast group list.

It is an integer that ranges from 1 to 128.

preview

Indicates that multicast group lists are added to a multicast profile in preview mode. Users applying this profile can preview all programs in the multicast group lists.

-

watch

Indicates that multicast group lists are added to a multicast profile in watch mode. Users applying this profile can watch all programs in the multicast group lists.

-

Views

Multicast profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

A multicast group list is in the middle of the three-level control mechanism for controllable multicast, and is a set of multicast groups. A multicast group list can contain multiple multicast groups. For example, multicast group list l1 contains g1, g2, g3, and g4. A multicast group can be contained in multiple multicast group lists. For example, g3 is contained in l1 and l2. When you configure controllable multicast, you must add the multicast group list to a multicast profile.

Prerequisites

The specified multicast group list has been created.

Example

# Reference the multicast group list named list1 in the multicast profile profile1.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-list list1
[HUAWEI-btv-list-list1] quit
[HUAWEI-btv] multicast-profile profile1
[HUAWEI-btv-profile-profile1] add multicast-list name list1 watch

# Reference the multicast group lists with indexes 1 to 10 in the multicast profile profile1.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-profile profile1
[HUAWEI-btv-profile-profile1] add multicast-list index 1 to 10 watch

attach multicast-profile

Function

The attach multicast-profile command binds a multicast profile to a user.

The undo attach multicast-profile command cancels the binding between a multicast profile and a user.

By default, no multicast profile is bound to a user.

Format

attach multicast-profile profile-name [ interface interface-type interface-number | mac-address mac-address ] *

undo attach multicast-profile [ profile-name [ interface interface-type interface-number | mac-address mac-address ] * ]

Parameters

Parameter

Description

Value

profile-name

Specifies the name of a multicast profile.

The value is a string of 1 to 31 case-insensitive characters without spaces.

interface interface-type interface-number

Specifies a user interface. interface-type specifies the type of the user interface. interface-number specifies the number of the user interface.

-

mac-address mac-address

Specifies the MAC address of a user host.

The MAC address is in the format of H-H-H. Each H stands for four hexadecimal numbers.

Views

VLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Traditional multicast services are uncontrollable. User hosts send IGMP/MLD Report packets to join a specified multicast group. Then they can receive multicast packets of the group. With the development of IPTV services, uncontrollable multicast services cannot meet carriers' requirements. You can configure controllable multicast to authenticate user rights in the VLAN that join a multicast group. The controllable multicast function authenticates users in a VLAN that need to join a multicast group using the multicast group, multicast group list, and multicast profile. After a multicast profile is configured, bind this profile to a VLAN. When a user host sends a request to join a channel, the request is snooped if the channel requested by the user host is not in the multicast profile.

Prerequisites

The specified multicast profile has been created.

Precautions

The switch supports the port+VLAN multicast control mode. To configure the multicast service for multiple user interfaces in the same VLAN, you need to specify a multicast profile for each interface individually by specifying the interface interface-type interface-number parameter.

Example

# Bind profile1 to the user with the MAC address being 1-2-3 on GE0/0/1 in VLAN 4.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-profile profile1
[HUAWEI-btv-profile-profile1] quit
[HUAWEI-btv] quit
[HUAWEI] vlan 4
[HUAWEI-vlan4] attach multicast-profile profile1 interface gigabitethernet 0/0/1 mac-address 1-2-3

btv

Function

The btv command enables controllable multicast and displays the BTV view.

The undo btv command disables controllable multicast and deletes all configurations in the BTV view.

By default, controllable multicast is disabled.

Format

btv

undo btv

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

The btv command allows you to configure controllable multicast in the BTV view.

The undo btv deletes all the controllable multicast configurations. Exercise caution when you run this command.

Example

# Enter the BTV view.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv]

display multicast-group

Function

The display multicast-group command displays the configuration of a multicast group.

Format

display multicast-group [ group-name ]

Parameters

Parameter

Description

Value

group-name

Specifies the name of a multicast group.

The value is a string of 1 to 31 case-insensitive characters without spaces.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Using the display multicast-group command, you can view details about a specified multicast group, if group-name is specified. Otherwise, you can view brief information about all multicast groups.

Example

# Display brief information about all multicast groups.

<HUAWEI> display multicast-group 
-------------------------------------------------------------------------      
 Index        Multicast-group-name              Address                         
 -------------------------------------------------------------------------      
  1           g1                               232.0.0.1[10.1.1.1]              
  2           g2                               232.0.0.2[10.2.1.1]              
                                                                                
 Total: 2                                              

# Display details about the multicast group named g1.

<HUAWEI> display multicast-group g1
 Multicast-group-name        : g1
 Address                     : 232.0.0.1[10.1.1.1]
 Referenced list :
        l1

 Total: 1
Table 8-144  Description of the display multicast-group command output

Item

Description

Index

Index of a multicast group

Multicast-group-name

Name of a multicast group

Address

Multicast group and source address

Referenced list

Multicast group list that a multicast group is added to

Total

Total number of multicast groups

Related Topics

display multicast-list

Function

The display multicast-list command displays the configuration of a multicast group list.

Format

display multicast-list [ list-name ]

Parameters

Parameter

Description

Value

list-name

Specifies the name of a multicast group list.

The value is a string of 1 to 31 case-insensitive characters without spaces.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If you specify the name of a multicast group list in the display multicast-list command, detailed information about the specified multicast group list is displayed. If you do not specify a multicast group list in the command, the summary information about all multicast group lists is displayed.

Example

# Display brief information about all multicast group lists.

<HUAWEI> display multicast-list
 -------------------------------------------------------------------------      
 Index        Multicast-list-name             Multicast-group                   
 -------------------------------------------------------------------------      
  1             l1                                     2                        
                                                                                
 Total: 1    

# Display details about the multicast group list named l1.

<HUAWEI> display multicast-list l1
 Multicast-list-name : l1                                                       
                                                                                
 Referenced multicast-group (Total: 2)                                          
        g1                               232.0.0.1[10.1.1.1]                    
        g2                               232.0.0.2[10.2.1.1]                    
                                                                                
 Referenced multicast-profile (Total: 2)                                        
        p1                               [w]                                    
        p2                               [w]   
Table 8-145  Description of the display multicast-list command output

Item

Description

Index

Index of a multicast group list.

Multicast-list-name

Name of a multicast group list.

Multicast-group

Number of multicast groups contained in a multicast group list.

Referenced multicast-group

Multicast groups contained in a multicast group list. For example, g1 and 232.0.0.1 are the name and address of the multicast group, while 10.1.1.1 is a multicast source address.

Referenced multicast-profile

Profile that a multicast group list is added to. p1 is the name of the multicast profile. [w] means that the profile is in watching state, and [p] indicates that the profile is in preview state.

Total

  • The first Total field indicates the total number of multicast group lists.
  • The second Total field indicates the number of multicast groups in the specified multicast group list.
  • The third Total field indicates the number of multicast profiles that references the multicast group list.
Related Topics

display multicast-profile

Function

The display multicast-profile command displays information about multicast profile.

Format

display multicast-profile [ profile-name [ verbose ] ]

Parameters

Parameter

Description

Value

profile-name

Specifies the name of a multicast profile.

The value is a string of 1 to 31 case-insensitive characters without spaces.

verbose

Indicates detailed information.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If you specify profile-name, this command displays information about a specified multicast profile. If you do not specify profile-name, this command displays brief information about all multicast profiles.

Example

# Display brief information about all multicast profiles.

<HUAWEI> display multicast-profile
 -----------------------------------------------------------------------------
 Index        Profile-Name                    Multicast-list  Attach-User
 -----------------------------------------------------------------------------
  1             p1                                   1              2
  2             p2                                   2              2

 Total: 2

# Display detailed information about the multicast profile p1.

<HUAWEI> display multicast-profile p1 verbose
 Profile-name : p1
 Referenced multicast-group  (Total: 2)
        g1                               225.0.0.1        [w]
        g2                               225.0.0.2        [w]
Table 8-146  Description of the display multicast-profile command output

Item

Description

Index

Index of a multicast profile.

Profile-Name

Name of the multicast profile.

Multicast-list

Number of multicast group lists contained in the multicast profile.

Attach-User

Number of user VLANs that the multicast profile is bound to.

Referenced multicast-group

Number of multicast groups in the multicast profile. In this example, g1 is the multicast group name, 225.0.0.1 is the group address. [w] means that the profile is in watching state, and [p] indicates that the profile is in preview state.

Total

  • The first Total field indicates the total number of multicast profiles.
  • The second Total field indicates the number of multicast groups in the specified multicast profile.
Related Topics

display multicast-profile-apply

Function

The display multicast-profile-apply command displays bindings between multicast profiles and VLANs.

Format

display multicast-profile-apply

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can use this command to check the multicast profiles applied to different VLANs.

Example

# Display bindings between multicast profiles and VLANs on the switch.

<HUAWEI> display multicast-profile-apply
------------------------------------------------------------------------------ 
  Vlan-id  Port                      SMAC                            Max-Users
                       Index               Profile-name
 ------------------------------------------------------------------------------ 
  Vlan1    --                        --                                 8       
                         1                   p1
  Vlan2    --                        --                                 8       
                         1                   p1
  Vlan3    --                        --                                 8       
                         2                   p2
  Vlan4    --                        --                                 8       
                         2                   p2
                                                                                
 Total: 4                                  
Table 8-147  Description of the display multicast-profile-apply command output

Item

Description

Vlan-id

ID of a VLAN bound to a multicast profile.

Port

Interface in the VLAN. -- indicates that no interfaces are bound to the multicast profile in this VLAN.

Index

Index of a multicast profile.

SMAC

MAC address of a user. -- indicates that no user hosts are bound to the multicast profile in this VLAN.

Profile-name

Name of a multicast profile.

Max-Users

Maximum number of programs that users can watch and preview at the same time. If the value is set in a VLAN and the multicast profile bound to the VLAN, only the configuration in the VLAN takes effect. If the value is not set in a VLAN:
  • The configuration in the multicast profile takes effect if the VLAN is bound to only one multicast profile.
  • The default value 8 is used if the VLAN is bound to multiple multicast profiles.

Total

Total number of binding entries between VLANs and multicast profiles.

max-program-num (multicast profile view)

Function

The max-program-num command sets the maximum number of programs that users can receive simultaneously.

The undo max-program-num command restores the maximum number of programs for a user to the default value.

By default, users can receive a maximum of 8 programs simultaneously.

Format

max-program-num max-value

undo max-program-num [ max-value ]

Parameters

Item

Description

Value

max-value

Indicates the maximum number of programs that users can receive simultaneously.

The value ranges from 1 to 8.

Views

Multicast profile view

Default Level

2: Configuration level

Usage Guidelines

Run the max-program-num (VLAN view) command in the VLAN view to set the maximum number of multicast groups that users can simultaneously join. If the value is set in a VLAN and the multicast profile bound to the VLAN, only the configuration in the VLAN takes effect. If the value is not set in a VLAN:
  • The configuration in the multicast profile takes effect if the VLAN is bound to only one multicast profile.
  • The default value 8 is used if the VLAN is bound to multiple multicast profiles.

Example

# Set the maximum number of programs that multicast profile p1 allows users to receive simultaneously to 4.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-profile p1
[HUAWEI-btv-profile-p1] max-program-num 4

max-program-num (VLAN view)

Function

The max-program-num command sets the maximum number of programs that users can receive simultaneously.

The undo max-program-num command restores the maximum number of programs for a user to the default value.

By default, users can receive a maximum of 8 programs simultaneously.

Format

max-program-num max-value [ interface interface-type interface-number | mac-address mac-address ] *

undo max-program-num [ interface interface-type interface-number | mac-address mac-address ] *

Parameters

Item

Description

Value

max-value

Indicates the maximum number of programs that users can receive simultaneously.

The value ranges from 1 to 8.

interface interface-type interface-number

Indicates the maximum number of programs that users on a specified interface can watch simultaneously.

-

mac-address mac-address

Indicates the maximum number of programs that users with specified MAC addresses can watch simultaneously.

The value is in H-H-H format, in which H is a 4-digit hexadecimal number.

Views

VLAN view

Default Level

2: Configuration level

Usage Guidelines

Run the max-program-num (multicast profile view) command in the multicast profile view to set the maximum number of multicast groups that users can simultaneously join. If the value is set in a VLAN and the multicast profile bound to the VLAN, only the configuration in the VLAN takes effect. If the value is not set in a VLAN:
  • The configuration in the multicast profile takes effect if the VLAN is bound to only one multicast profile.
  • The default value 8 is used if the VLAN is bound to multiple multicast profiles.

The interface interface-type interface-number and mac-address mac-address parameters specified in the command must be the same as those specified in the attach multicast-profile command.

Example

# Allow users in VLAN 10 to watch four programs simultaneously.

<HUAWEI> system-view
[HUAWEI] vlan 10
[HUAWEI-vlan10] max-program-num 4

multicast-group

Function

The multicast-group command creates a controllable multicast group.

The undo multicast-group command deletes a controllable multicast group.

By default, no multicast group is created.

Format

multicast-group group-name { ip-address ipv4-group-address [ source ipv4-source-address ] | ipv6-address ipv6-group-address [ source ipv6-source-address ] }

undo multicast-group { all | group-name | index start-index to end-index }

Parameters

Parameter

Description

Value

group-name

Specifies the name of a multicast group.

The value is a string of 1 to 31 case-insensitive characters without spaces.

ip-address ipv4-group-address

Specifies the address of a multicast group.

The value ranges from 224.0.1.0 to 239.255.255.255 in dotted decimal notation.

source ipv4-source-address

Specifies an IPv4 source address.

It is in dotted decimal notation.

ipv6-address ipv6-group-address

Specifies an IPv6 multicast group address.

The address is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X. The value ranges from FF00:: to FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF, excluding the multicast addresses reserved for protocols.

source ipv6-source-address

Specifies an IPv6 source address.

The address is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X.

all

Deletes all multicast groups.

-

index start-index to end-index

Specifies the index of a multicast group. start-index specifies the start index of a multicast group, and end-index specifies the end index of a multicast group.

The value is an integer that ranges from 1 to 1024.

Views

Broadband TV (BTV) view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

A multicast group is at the lowest level of the three-level control mechanism for controllable multicast. A multicast group corresponds to a multicast address such as 224.1.1.1. A multicast group can be regarded as a channel or program of IPTV.

Precautions

If two programs have the same multicast IP address but different source addresses, the two programs are considered different.

Example

# Configure the IP address of a multicast group to 225.0.0.1 and name the multicast program tv-1.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-group tv-1 ip-address 225.0.0.1

# Configure the IP address of a multicast group to ff1e::1234 and name the multicast program tv-2.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-group tv-2 ipv6-address ff1e::1234

# Configure the IP address of a multicast group to 232.0.0.1, specify the source IP address to 192.168.1.1, and name the multicast program tv-3.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-group tv-3 ip-address 232.0.0.1 source 192.168.1.1

multicast-list

Function

The multicast-list command creates a multicast group list.

The undo multicast-list command deletes a multicast group list.

By default, no multicast group list is configured.

Format

multicast-list list-name

undo multicast-list { list-name | index start-index to end-index | all }

Parameters

Parameter

Description

Value

list-name

Specifies the name of a multicast group list.

The value is a string of 1 to 31 case-insensitive characters without spaces.

index start-index to end-index

Specifies the index of a multicast group list. start-index specifies the start index of a multicast group, and end-index specifies the end index of a multicast group.

It is an integer that ranges from 1 to 128.

all

Deletes all multicast group lists.

-

Views

BTV view

Default Level

2: Configuration level

Usage Guidelines

A multicast group list is in the middle of the three-level control mechanism for controllable multicast, and is a set of multicast groups. A multicast group list can contain multiple multicast groups. For example, multicast group list L1 contains G1, G2, G3, and G4. A multicast group can be contained in multiple multicast group lists. For example, G3 is contained in L1 and L2. When you configure controllable multicast, you must add the multicast group list to a multicast profile.

Using the multicast-list command, you can create a multicast group list and enter the multicast group list view. If a multicast group list is already created, you can directly enter the multicast group list view.

Example

# Create the multicast group list named list1.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-list list1
[HUAWEI-btv-list-list1]

multicast-preview interval

Function

The multicast-preview interval command sets the interval between the first and second previews on a multicast group.

The undo multicast-preview interval command restores the default interval between the first and second previews on a multicast group.

By default, the interval between the first and second previews on a multicast group is 5 minutes.

Format

multicast-preview interval interval

undo multicast-preview interval [ interval ]

Parameters

Parameter

Description

Value

interval

Specifies the interval between the first and second previews on a multicast group.

It is an integer that ranges from 1 to 30, in minutes.

Views

Multicast profile view

Default Level

2: Configuration level

Usage Guidelines

Controllable multicast allows users to preview programs. The multicast-preview interval command sets the interval between the first and second previews. Users can preview the same program after this interval.

Example

# Set the interval between the first and second previews on a multicast profile named profile1 to 15 minutes.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-profile profile1
[HUAWEI-btv-profile-profile1] multicast-preview interval 15

multicast-preview minutes

Function

The multicast-preview minutes command sets the period for a user to preview a multicast group each time.

The undo multicast-preview minutes command restores the default preview period.

By default, the period for a user to preview a multicast group each time is 5 minutes.

Format

multicast-preview minutes minutes

undo multicast-preview minutes [ minutes ]

Parameters

Parameter

Description

Value

minutes

Specifies the period for a user to preview a multicast group each time.

It is an integer that ranges from 1 to 10, in minutes.

Views

Multicast profile view

Default Level

2: Configuration level

Usage Guidelines

Controllable multicast allows users to preview programs. The multicast-preview minutes command sets the period for a user to preview a multicast group. Users are not allowed to preview the program after the configured period is reached.

Example

# Set the period for previewing the multicast profile named profile1 each day to 9 minutes.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-profile profile1
[HUAWEI-btv-profile-profile1] multicast-preview minutes 9

multicast-preview times

Function

The multicast-preview times command sets the number of times for a user to preview a multicast group each day.

The undo multicast-preview times command restores the default number of previews each day.

By default, the number of times a user can preview a multicast group each day is 10.

Format

multicast-preview times times

undo multicast-preview times [ times ]

Parameters

Parameter

Description

Value

times

Specifies the number of times for a user to preview a multicast group each day.

It is an integer that ranges from 1 to 10.

Views

Multicast profile view

Default Level

2: Configuration level

Usage Guidelines

Controllable multicast allows users to preview programs. The multicast-preview times command sets the number of times for a user to preview a multicast group each day.

Example

# Set the number of times for a user to preview the multicast profile named profile1 each day to 8.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-profile profile1
[HUAWEI-btv-profile-profile1] multicast-preview times 8

multicast-profile

Function

The multicast-profile command creates a multicast profile and enters the multicast profile view. If a multicast profile is already created, you can directly enter the multicast profile view.

The undo multicast-profile command deletes a multicast profile.

By default, no multicast profile is configured.

Format

multicast-profile profile-name

undo multicast-profile { profile-name | index start-index to end-index | all }

Parameters

Parameter

Description

Value

profile-name

Specifies the name of a multicast profile.

The value is a string of 1 to 31 case-insensitive characters without spaces.

index start-index to end-index

Specifies the index of a multicast profile. start-index specifies the start index of a multicast profile, and end-index specifies the end index of a multicast profile.

It is an integer that ranges from 1 to 64.

all

Deletes all multicast profiles.

-

Views

BTV view

Default Level

2: Configuration level

Usage Guidelines

A multicast profile is a set of multicast group lists, and it defines user rights to join related multicast groups. A multicast profile can contain multiple multicast group lists. For example, multicast profile P1 contains L1, L2, and L3. A multicast group list can be contained in several multicast profiles. For example, L2 is contained in P1 and P2. Multicast group lists that are added to a profile have their attributes, that is, preview or watch. If a multicast group list is added to a multicast profile in watch mode, users bound to the multicast profile can watch all multicast groups in the list. If a multicast group list is added to a multicast profile in preview mode, users bound to the multicast profile can only preview all multicast groups in the list.

Example

# Create the multicast profile named profile1 and enter the multicast profile view.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-profile profile1
[HUAWEI-btv-profile-profile1]
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000178165

Views: 41841

Downloads: 1101

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next