No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S1720, S2700, S5700, and S6720 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Startup Configuration Submenu

Startup Configuration Submenu

In the BootLoad main menu, select 3 to access the startup configuration submenu.
          BootLoad Menu

    1. Boot with default mode
    2. Enter serial submenu
    3. Enter startup submenu
    4. Enter ethernet submenu
    5. Enter filesystem submenu
    6. Enter password submenu
    7. Clear password for console user
    8. Reboot
    (Press Ctrl+E to enter diag menu) 

Enter your choice(1-8): 3

        Startup Configuration Submenu

     1. Display startup configuration
     2. Modify startup configuration
     3. Return to main menu

Enter your choice(1-3):
Table 11-2  Startup configuration submenu



1. Display startup configuration

Displays the current system software, configuration file, and patch file, and those used in the last startup.

Before upgrading or rolling back the system, you can check whether the correct startup files are specified.

2. Modify startup configuration

Allows you to modify startup configuration information.

Before upgrading or rolling back the system, you can specify the system software, configuration file, and patch file.


Some S5720HI switches running V200R008 and later versions cannot be downgraded to V200R007C00SPC500.

3. Return to main menu


Updated: 2019-10-21

Document ID: EDOC1000178166

Views: 269741

Downloads: 1988

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next