No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S1720, S2700, S5700, and S6720 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Startup Configuration

Verifying the Startup Configuration

Before upgrading or rolling back the system, select 1 in the startup configuration submenu to check whether the correct startup files are specified.

       Startup Configuration Submenu                                            
    1. Display startup configuration                                            
    2. Modify startup configuration                                             
    3. Return to main menu                                                      
Enter your choice(1-3): 1                                                       
Current startup configuration                                                   
  startup type      : Flash                                                     
  startup file      :                                    
  configuration file:                                                   
  patch package     :                               
Last time startup state : Success                                               
Latest successful startup configuration                                         
  startup file      :                                    
  configuration file:                                                   
  patch package     : 
Table 11-3  Output information description



Current startup configuration

The following shows current startup configuration information.

startup type

Startup storage device where the system software, configuration file, and patch file are stored. The device supports only the flash memory. The parameter value is Flash.

startup file

System software, in the format of .cc.

configuration file

Configuration file, in the format of .zip or .cfg.

patch package

Patch file, in the format of .pat.

Last time startup state

Last startup status. The value can be:
  • Success
  • Failed

Latest successful startup configuration

Configuration used in the last successful startup.

Updated: 2019-10-21

Document ID: EDOC1000178166

Views: 309185

Downloads: 2088

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next