No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S1720, S2700, S5700, and S6720 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
File System Submenu

File System Submenu

In the BootROM main menu, select 5 to access the file system submenu.

          BootROM  MENU

    1. Boot with default mode
    2. Enter serial submenu
    3. Enter startup submenu
    4. Enter ethernet submenu
    5. Enter filesystem submenu
    6. Enter password submenu
    7. Clear password for console user
    8. Reboot
    (Press Ctrl+E to enter diag menu) 

Enter your choice(1-8): 5
         FILESYSTEM SUBMENU

    1. Erase Flash
    2. Format flash
    3. Delete file from Flash
    4. Rename file from Flash
    5. Display Flash files
    6. Update EPLD file
    7. Return to main menu

Enter your choice(1-7): 
Table 10-9  File system submenu

Item

Description

1. Erase Flash

Erases the flash memory. All information including the system software and configuration file are deleted from the flash memory.

After the device is deployed in a new environment, you can erase the flash memory and reload the system software and configuration file.

NOTICE:

After the flash memory is erased, the device cannot start. You need to reload the system software. Therefore, exercise caution before erasing the flash memory.

2. Format flash

Formats the flash memory.

If the flash memory fails, format the flash memory to rectify the fault. If the fault persists, contact technical support personnel.

NOTICE:

After the flash memory is formatted, the device cannot start. You need to reload the system software. Therefore, exercise caution before formatting the flash memory.

3. Delete file from Flash

Deletes files in the flash memory.

NOTE:

After you select 3 in the file system submenu, all files in the flash memory are displayed. You can delete files as required.

4. Rename file from Flash

Renames files.

NOTE:

After you select 4 in the file system submenu, all files in the flash memory are displayed. You can rename files as required.

5. Display Flash files

Displays all files in the flash memory. At the same time, the total size and remaining size of the flash memory are displayed.

6. Update EPLD file

Upgrades the EPLD. Before upgrading the EPLD, select the EPLD file for the upgrade, in the format of .bin.

8. Return to main menu

-

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178166

Views: 259019

Downloads: 1953

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next