No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S1720, S2700, S5700, and S6720 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Parameters on the Ethernet Port

Modifying Parameters on the Ethernet Port

Context

The BootROM allows you to connect a device to another device or a PC using FTP or TFTP to implement fast transfer of the system software, configuration file, and patch file. To ensure consistent parameters on both ends of an FTP or TFTP connection, set parameters on the Ethernet port (management interface) before setting up a connection.

Pre-configuration Tasks

In the BootROM menu, a device can function only as an FTP or TFTP client. Before transferring files using this menu, deploy an FTP or TFTP server as the file server and connect the server to the management interface on the device to ensure connectivity.

Procedure

  1. In the Ethernet submenu, select 4 to modify parameters on the Ethernet port.

              ETHERNET  SUBMENU                                                     
                                                                                    
        1. Update BootROM system                                                    
        2. Download file to Flash through ethernet interface                        
        3. Upload Configuration file to Ftp through ethernet interface              
        4. Modify ethernet interface boot parameter                                 
        5. Return to main menu                                                      
                                                                                    
    Be sure to select 4 to modify boot parameter before downloading!
    Enter your choice(1-5): 4                                                       
                                                                                    
              BOOTLINE  SUBMENU                                                     
                                                                                    
        1. Set TFTP protocol parameters                                             
        2. Set FTP protocol parameters                                              
        3. Return to ethernet menu                                                  
                                                                                    
    Enter your choice(1-3): 

  2. Configure TFTP or FTP parameters based on the selected server type.

    Table 10-6  Modifying parameters on the Ethernet port

    Operation

    Description

    Entering characters

    NOTE:

    The characters is case-insensitive. Spaces and the following characters cannot be used in the characters: ~ * / \ : ' "

    Indicates that the existing values need to be changed. Press Enter to confirm the operation.

    Entering a dot (.)

    Deletes existing information in the current view.

    Pressing a hyphen (-)

    Returns to the previous option.

    Pressing Ctrl+D

    Exists from the view for modifying parameters on the Ethernet port and returns to the Ethernet submenu.

    Pressing Enter

    Skips to the next option without any change.

    • If a TFTP server is configured as the file server, select 1 to access the submenu for modifying TFTP parameters.

                BOOTLINE  SUBMENU                                                     
                                                                                      
          1. Set TFTP protocol parameters                                             
          2. Set FTP protocol parameters                                              
          3. Return to ethernet menu                                                  
                                                                                      
      Enter your choice(1-3): 1                                                       
                                                                                      
      '.' = clear field;  '-' = go to previous field;  'Ctrl+D' = quit                      
      Load File name      : s5700li-V200R011C10.cc                              
      Switch IP address   : 192.168.1.15:ffffff00                                     
      Server IP address   : 192.168.1.40
      Table 10-7  Submenu for modifying TFTP parameters

      Item

      Description

      Load File name

      File to be uploaded.

      Switch IP address

      IP address of the management interface on the device. By default, the IP address of the management interface is 192.168.1.15:ffffff00.

      NOTE:

      The IP addresses of the device and the TFTP server must be on the same network segment.

      A subnet mask is an 8-digit hexadecimal number and does not support the format of dotted decimal notation or mask length. The subnet mask is automatically identified by the device and does not need to be set manually.

      Server IP address

      IP address of the TFTP server.

    • If an FTP server is configured as the file server, select 2 to access the submenu for modifying FTP parameters.
                BOOTLINE  SUBMENU                                                     
                                                                                      
          1. Set TFTP protocol parameters                                             
          2. Set FTP protocol parameters                                              
          3. Return to ethernet menu                                                  
                                                                                      
      Enter your choice(1-3): 2                                                       
                                                                                      
      '.' = clear field;  '-' = go to previous field;  'Ctrl+D' = quit                      
      Load File name      : s5700li-V200R011C10.cc                              
      Switch IP address   : 192.168.1.15:ffffff00                                     
      Server IP address   : 192.168.1.40                                              
      FTP User Name       : huawei                                                        
      FTP User Password   : 
      Table 10-8  Submenu for modifying FTP parameters

      Item

      Description

      Load File name

      File to be uploaded.

      Switch IP address

      IP address of the management interface on the device. By default, the IP address of the management interface is 192.168.1.15:ffffff00.

      NOTE:

      The IP addresses of the device and the FTP server must be on the same network segment.

      A subnet mask is an 8-digit hexadecimal number and does not support the format of dotted decimal notation or mask length. The subnet mask is automatically identified by the device and does not need to be set manually.

      Server IP address

      IP address of the FTP server.

      FTP User Name User name for logging in to the FTP server.
      FTP User Password Password for logging in to the FTP server, in cipher text.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178166

Views: 276882

Downloads: 2006

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next