No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S1720, S2700, S5700, and S6720 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Only a Few Options Are Available on the Web System?

Why Only a Few Options Are Available on the Web System?

The user level of the login web user is low.

Web users of level 2 or lower are monitoring users and can use only the ping and tracert functions. Web users of level 3 or higher are administrators and have all operation rights of a web page.

You can run the local-user user-name privilege level level command in AAA view to set the user level of the login user to level 3 or higher. The login user then has all operation rights of a web page.

Updated: 2019-10-21

Document ID: EDOC1000178166

Views: 271562

Downloads: 1995

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next