No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S1720, S2700, S5700, and S6720 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of the First Login

Overview of the First Login

This section describes first login modes supported by a device and the corresponding basic configuration.

Before configuring a new device, you must log in to the device locally. The device supports first login through the console port, mini USB port, or web system.

After login, configure the system time, device name, management IP address, and user level and authentication mode for Telnet users to facilitate subsequent configuration.

  • Before logging in to the device using the mini USB port, install the mini USB port driver on the user terminal.
  • When both the mini USB port and console port are connected to the user terminal, only the mini USB port can be used for login.
  • Before you log in to the device for the first time through the web system, the device must be in factory settings.
Updated: 2019-10-21

Document ID: EDOC1000178166

Views: 252192

Downloads: 1930

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next