No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S1720, S2700, S5700, and S6720 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Ethernet Submenu

Ethernet Submenu

Before transferring files using the Ethernet submenu, deploy an FTP or TFTP server as the file server and connect the device to the FTP or TFTP server using the management interface.

NOTE:

If no management interface is provided on a device, use the first port on the device to connect to the FTP or TFTP server. If the first port on a device is the combo port, use the electrical mode.

Compared with the rate for transferring files using the serial port, the file transfer using the Ethernet port is faster but requires the deployment of the FTP or TFTP server and an additional cable.

In the BootROM main menu, select 4 to access the Ethernet submenu.
          BootROM  MENU

    1. Boot with default mode
    2. Enter serial submenu
    3. Enter startup submenu
    4. Enter ethernet submenu
    5. Enter filesystem submenu
    6. Enter password submenu
    7. Clear password for console user
    8. Reboot
    (Press Ctrl+E to enter diag menu) 

Enter your choice(1-8): 4
                                                                                
          ETHERNET  SUBMENU                                                     
                                                                                
    1. Update BootROM system                                                    
    2. Download file to Flash through ethernet interface                        
    3. Upload Configuration file to Ftp through ethernet interface              
    4. Modify ethernet interface boot parameter                                 
    5. Return to main menu                                                      
                                                                                
Be sure to select 4 to modify boot parameter before downloading!                
Enter your choice(1-5):
Table 10-5  Ethernet submenu

Item

Description

1. Update BootROM system

Loads the BootROM program file using the Ethernet port and upgrades the BootROM.

NOTE:

If the BootROM is in V200R005 or earlier versions (excluding V200R005C02), restore the default BootROM password and then upgrade the BootROM.

The BootROM of the S5700LI cannot be updated to V200R001 or earlier versions using this submenu.

If you need to upgrade the BootROM using the Ethernet port, perform the following operations first:
  1. Prepare the BootROM program file to be updated, for example, the bootrom.bin file on the local device.
  2. Select 4. Modify ethernet interface boot parameter from the Ethernet submenu to modify network port parameters.
  3. After network port parameters are modified, select 3. Return to ethernet menu to return to the Ethernet submenu.
  4. Select 1. Update BootROM system to upgrade the BootROM system.

2. Download file to Flash through ethernet interface

Loads files to the flash memory using the Ethernet port.

3. Upload Configuration file to Ftp through ethernet interface

Uploads the configuration file to the FTP server for backup.

4. Modify ethernet interface boot parameter

Allows you to modify parameters on the Ethernet port. Properly set the parameters on the Ethernet port before uploading files using the Ethernet port.

The Ethernet port here refers to the management interface on the device. Configure the IP address of the Ethernet port, files to be uploaded, and FTP user name and password, to connect the device to the FTP or TFTP server.

5. Return to main menu

-

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178166

Views: 271204

Downloads: 1994

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next