No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S1720, S2700, S5700, and S6720 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Password Submenu

Password Submenu

In the BootLoad main menu, select 6 to enter the password submenu.
          BootLoad Menu

    1. Boot with default mode
    2. Enter serial submenu
    3. Enter startup submenu
    4. Enter ethernet submenu
    5. Enter filesystem submenu
    6. Enter password submenu
    7. Clear password for console user
    8. Reboot
    (Press Ctrl+E to enter diag menu) 

Enter your choice(1-8): 6


     1. Modify bootload password
     2. Reset bootload password
     3. Return to main menu

Enter your choice(1-3):
Table 11-10  Password submenu description



1. Modify bootload password

Changes the BootLoad password. You can change the BootLoad password to prevent unauthorized users from entering the BootLoad menu.

2. Reset bootload password

Restores the default BootLoad password. The default BootLoad password is

3. Return to main menu


Updated: 2019-10-21

Document ID: EDOC1000178166

Views: 276820

Downloads: 2006

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next