No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S1720, S2700, S5700, and S6720 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a Device Through the Mini USB Port

Logging In to a Device Through the Mini USB Port

Context

After completing the console user interface configuration on a device, you can log in to the device through the mini USB port. If the console user interface uses the default attribute settings and the default AAA authentication mode, the login process is as follows:

Procedure

  1. Install the mini USB driver on the PC.

    For details on how to install a mini USB driver, see Installation and Uninstallation Guide in the driver file package.

    The driver file Switch-MiniUSB-driver.00X.zip contains two drivers: 3410-VersX.X.X.X.zip and 1410-VersX.X.X.X.zip, applicable to different devices. (X represents the version number, and a larger value indicates a later version.) Select a proper driver based on the device model before installation.

  2. Use a mini USB cable to connect the USB port on the PC to the mini USB port on the device, as shown in Figure 6-4.

    Figure 6-4  Connecting to the device through the mini USB port

  3. Start the terminal emulation software on the PC. Create a connection, select the port for connection, and set communication parameters. (This section uses the third-party software SecureCRT as an example.)
    1. Click to establish a connection, as shown in Figure 6-5.

      Figure 6-5  Establishing a connection

    2. Set the port for connection and communication parameters, as shown in Figure 6-6.

      Select the port for connection. For example, you can view port information in Device Manager in the Windows operating system, and select the port for connection.

      Communication parameters of the terminal emulation software must be consistent with the default attribute settings of the console user interface on the device, which are 9600 bit/s baud rate, 8 data bits, 1 stop bit, no parity check, and no flow control.

      NOTE:

      By default, no flow control mode is configured on the device. Because RTS/CTS is selected in the software by default, you need to deselect RTS/CTS; otherwise, you cannot enter commands.

      Figure 6-6  Setting the port for connection and communication parameters

  4. Click Connect. The following information will be displayed, prompting you to enter the user name and password. (In password authentication, the system prompts you to enter the password. The following output is only for reference.)

    Login authentication
    
    
    Username:admin 
    Password: 
    <HUAWEI>         

    You can run commands to configure the device. Enter a question mark (?) whenever you need help.

Verifying the Configuration

  • Run the display users [ all ] command to check user login information on the user interface.
  • Run the display user-interface console 0 command to check user interface information.
  • Run the display local-user command to check the local user attributes.
  • Run the display access-user command to check information about online users.
Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178166

Views: 257054

Downloads: 1948

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next