No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Establishing a Stack Through Service Port Connections Using Ordinary Stack Cables

Establishing a Stack Through Service Port Connections Using Ordinary Stack Cables

Carefully review the role and functions of member switches before you use service port connections to establish a stack. You are advised to follow the process in Figure 9-34 to establish a stack.

In Figure 9-34, the three steps in the dashed box are included in Performing Software Configurations. Configuring a stack ID and stack priority are optional but are recommended to facilitate management.

Figure 9-34  Process of using service port connections to establish a stack
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 208205

Downloads: 996

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next