No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Splitting an SVF System

Splitting an SVF System


If an SVF system does not need to transmit services and needs to be split, perform the following operations to split the SVF system:
  1. Back up the SVF configuration file on the parent in case the SVF system needs to be set up again.
  2. Remove the cables between ASs and the parent. Log in to ASs and run the undo uni-mng enable command in the user view to restore the ASs to the standalone mode. After this command is executed, the AS restarts.
  3. Delete the SVF configuration on the parent.
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 206915

Downloads: 989

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next