No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preventing Cleared Alarms from Being Reported Repeatedly

Preventing Cleared Alarms from Being Reported Repeatedly

Context

After the clear alarm active command or MIB table hwAlarmActiveTable is used to manually clear active alarms, these active alarms are reported repeatedly when being generated again. To prevent the number of repeatedly reported active alarms, prevent manually cleared active alarms from being reported repeatedly before their clear alarms are reported.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run alarm

    The alarm management view is displayed.

  3. Run mask manual-clear alarm

    Manually cleared active alarms are not reported repeatedly.

    By default, active alarms are reported repeatedly after being manually cleared.

Follow-up Procedure

  1. Run clear alarm active { all | sequence-number sequence-number }

    Active alarms are cleared.

    After active alarms are cleared, these active alarms are not reported repeatedly before their clear alarms are reported.

  2. Run display alarm manual-clear

    Active alarms that are not reported repeatedly are displayed.

  3. (Optional) Run clear alarm manual-clear { all | sequence-number sequence-number }

    Active alarms that are not reported repeatedly are cleared so that corresponding active alarms can be reported again.

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 207431

Downloads: 993

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next