No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for PoE

Default Settings for PoE

Table 8-5  Default settings for PoE


Default Setting

Power management mode


Power supply priority of an interface


Maximum output power of an interface

30000 mW

  • The maximum output power of a MultiGE interface is 90000 mW on the S5720-14X-PWH-SI-AC.
  • The maximum output power of a MultiGE interface is 60000 mW on the S5720-28X-PWH-LI-AC.
  • The maximum output power of each interface from GE0/0/1 to GE0/0/12 on the S5720-16X-PWH-LI-AC is 60000 mW.
  • The maximum output power of a interface is 60000 mW on the S6720SI.

Reserved PoE power percentage


PoE power alarm threshold


Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 206707

Downloads: 989

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next