No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Reserved VLAN of the Stack

Configuring the Reserved VLAN of the Stack


By default, a stack uses VLAN 4093 as the reserved VLAN. A reserved VLAN is used to exchange stack protocol packets only. If you need to use VLAN 4093 to deploy services, you can change the reserved VLAN with the commands used in the following procedure.

The reserved VLAN of a stack cannot be used to deploy other services. If the reserved VLAN is occupied, a stack cannot be established successfully. You can run the undo vlan vlan-id command to delete the occupied VLAN or run the following commands to configure another VLAN as the stack's reserved VLAN.


  1. Run the system-view command to enter the system view.
  2. Run the stack reserved-vlan vlan-id command to configure a reserved VLAN for a stack.

    By default, a stack uses VLAN 4093 as the reserved VLAN.

Verifying the Configuration

  • Run the display stack configuration command to check the configured reserved VLAN for a stack.

Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 206872

Downloads: 989

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next