No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Debugging Message Output

Configuring Debugging Message Output

Pre-configuration Tasks

Before enabling debugging message output, start the Switch.

Debugging occupies CPU resources on the device, affecting system running. After debugging, run the undo debugging all command to disable it immediately.

Configuration Procedure

Table 4-11 lists the configuration process for enabling debugging message output.
Table 4-11  Configuration process for enabling debugging message output
No. Configuration Task Description Remarks
1 Enabling the Information Center

You can configure the information center only after the information center is enabled.

By default, the information center is enabled.

Steps 2 and 3 are optional and can be performed in any sequence.

2 (Optional) Renaming Information Channels

You can easy-to-remember names for channels to facilitate information center usage.

3 (Optional) Setting the Timestamp Format of Debugging Messages

To adjust the time format and time precision for information output, configure the timestamp.

4 Configuring the Device to Output Debugging Messages to the Log File

After debugging messages are output to a log file, you can download the log file anytime to monitor device running based on debugging messages.

Steps 4 to 7 can be performed in any sequence. You can view debugging messages in the console or terminal.

5 Configuring the Device to Output Debugging Messages to the Console

After debugging messages are output to the console, you can view debugging messages on the console (host from which you can log in to the through the console interface) to monitor device running.

6 Configuring the Device to Output Debugging Messages to the Terminal

After debugging messages are output to a user terminal, you can view debugging messages on the user terminal (host from which you log in to the Switch through STelnet) to monitor device running.

7 Configuring the Device to Output Debugging Messages to the Log Host

After configuring the Switch to output debugging messages to a log host, you can view debugging messages saved on the log host to monitor device running.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178167

Views: 223304

Downloads: 1043

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next