No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Up an SVF System (The Parent Is Directly Connected to ASs)

Setting Up an SVF System (The Parent Is Directly Connected to ASs)

Context

As shown in Figure 10-5, ASs in an SVF system are classified into level-1 and level-2 ASs. You can connect a level-1 AS to the parent and then a level-2 AS to the level-1 AS.

By default, you do not need to configure the ports that connect a level-1 AS to the parent and connect a level-2 AS to the level-1 AS because ASs are plug-and-play. You only need to configure fabric ports that connect the parent to a level-1 AS and connect a level-1 AS to a level-2 AS.

Figure 10-5  Parent is directly connected to ASs

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178167

Views: 209626

Downloads: 1004

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next