No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Applying a Time Range to the Device in Dormancy State

(Optional) Applying a Time Range to the Device in Dormancy State


On an enterprise network, a device does not work at certain time. You can apply a time range to the device in dormancy state. When dormancy conditions are met, the device automatically enters the dormancy state during the time range. This saves power.

If no time range is applied to the device, the device detects the status of all awakening ports all round the clock. The device enters the dormancy state when the device does not detect any awakening port in Up state within the default 20 minutes.

When the device is in dormancy mode, if a user logs in to the computer from an awakening port, the device immediately detects the awakening port in Up state. Then the device is awakened and starts to work.


  1. Run system-view

    The system view is displayed.

  2. Run time-range time-name { start-time to end-time days | from time1 date1 [ to time2 date2 ] }

    A time range is specified.

  3. Run sleep time-range timerange-name

    A time range is applied to the device in dormancy state.

    By default, no time range is applied to the device.

Updated: 2019-10-21

Document ID: EDOC1000178167

Views: 209953

Downloads: 1005

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next