No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the PoE Function
Enabling the PoE Function
Context
Ensure that the PoE function is enabled on an interface
before powering on a PD connected to the interface.
Procedure
Run system-view
The system view is displayed.
Run interfaceinterface-typeinterface-number
The interface view is displayed.
Run poe enable
The PoE function is enabled on the interface.
By default, the PoE function is enabled on interfaces.
If you run the shutdown command to shut down a PoE-enabled interface, the power supply for the interface is not affected. To stop power supply for the interface, run the undo poe enable command in the interface view.