No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Identify the Stack IDs of Member Switches Through Indicators Without Logging In to the Stack?

How Do I Identify the Stack IDs of Member Switches Through Indicators Without Logging In to the Stack?

After a stack is established successfully, press the mode switching button to set the mode status indicator to work in STACK mode. You can determine the stack IDs of the master switch and member switches by viewing the mode status indicator and service port indicators. Among the switch models that support stacking:
  • The S5700-SI, S5700-EI, S5700-HI, S5710-C-LI, and S6700-EI use the same mode status indicator to show the STACK and SPEED modes. After you press the mode switching button, the indicator turns steady red for 45 seconds and then turns off, indicating the switch has entered the STACK mode.
  • The S2720EI, S2750EI, S5700-LI, S5720-LI, S5720S-LI, S5710-EI, S5720-EI, S5720-SI, S5720S-SI, S5710-X-LI, S5700S-X-LI, S5700S-28P-PWR-LI-AC, S5730SI, S5730S-EI, S6720LI, S6720S-LI, S6720SI, S6720S-SI, S6720-EI and S6720S-EI have an independent STACK indicator. After you press the mode switching button, the indicator turns steady green or is blinking for 45 seconds and then turns off, indicating the switch has entered the STACK mode.
You can determine the stack IDs of the master switch and member switches through the status of service port indicators. Table 9-32 explains how to interpret service port indicators in STACK mode.
Table 9-32  Service port indicators in STACK mode
Color Status and Meaning

Off

Port indicators do not indicate the stack ID of the switch.

Green

If the indicator is steady on, the switch is not the master switch in the stack. If the indicator is blinking, the switch is the master switch in the stack.
  • If the indicator of a port is steady on, the switch where this port is located is not the master switch, and the number of this port is the stack ID of this switch.
  • If the indicator of a port is blinking, the switch where this port is located is the master switch, and the number of this port is the stack ID of this switch.
  • If the first nine port indicators of the switch are steady on, this switch is not the master switch, and its stack ID is 0.
  • If the first nine port indicators of the switch are blinking, this switch is the master switch, and its stack ID is 0.
Translation
Download
Updated: 2019-03-28

Document ID: EDOC1000178167

Views: 194272

Downloads: 938

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next