No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Log Output

Configuring Log Output

Pre-configuration Tasks

Before enabling log output, start the Switch.

Configuration Procedure

Table 4-7 lists the configuration process for enabling log output.
Table 4-7  Configuration procedure for enabling log output
No. Configuration Task Description Remarks
1 Enabling the Information Center

You can configure the information center only after the information center is enabled.

By default, the information center is enabled.

Steps 2 to 7 are optional and can be performed in any sequence.

2 (Optional) Renaming Information Channels

You can rename channels, which facilitates memorization and usage.

3 (Optional) Configuring Log Filtering

If some logs are unnecessary, configure the Switch not to output these logs.

4 (Optional) Setting the Timestamp Format of Logs

To adjust the time format and time precision for information output, configure the timestamp.

5 (Optional) Disabling the Log Counter Function

To enable the Switch not to encapsulate sequence numbers in logs sent to the log buffer, console, or terminal, disable the log counter function.

6 (Optional) Configuring the Suppression of the Log Processing Rate

You can configure suppression of massive logs to protect the information center against the impact of a large number of logs.

7 (Optional) Enabling Suppression of Statistics About Consecutive Repeated Logs

You can configure suppression of consecutive repeated logs to protect the information center against the impact of duplicate logs.

8 Configuring the Device to Output Logs to the Log Buffer

To view logs in the log buffer, configure the Switch to output logs to the log buffer.

Steps 8 to 12 can be configured in any sequence. You can configure the device to output logs to one or more destinations according to your needs.

9 Configuring the Device to Output Logs to Log Files

After logs are output to a log file, you can download the log file anytime to monitor device running based on the logs.

10 Configuring the Device to Output Logs to the Console

After logs are output to the console, you can view logs on the console (host from which you can log in to the Switch through the console interface) to monitor device running.

11 Configuring the Device to Output Logs to a Terminal

After logs are output to a user terminal, you can view logs on the user terminal (host from which you log in to the Switch through STelnet) to monitor device running.

12 Configuring the Device to Output Logs to a Log Host

After configuring the Switch to output logs to a log host, you can view logs saved on the log host to monitor device running.

Translation
Download
Updated: 2019-03-28

Document ID: EDOC1000178167

Views: 193708

Downloads: 938

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next