No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Up an SVF System (The Parent Is Connected to ASs Across a Layer 2 Network)

Setting Up an SVF System (The Parent Is Connected to ASs Across a Layer 2 Network)


In Figure 10-6, when ASs connect to an SVF system through a Layer 2 network, only level-1 ASs are supported and APs can connect to ASs.

The fabric-port that connects the parent to an AS through a Layer 2 network is called an indirectly connected fabric port. Indirectly connected fabric ports on the parent and fabric ports that connect ASs to an SVF system need to be manually configured.

Figure 10-6  Parent is connected to ASs across a layer 2 network

Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 208284

Downloads: 998

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next