No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Temperature Alarm Thresholds

Configuring Temperature Alarm Thresholds

You can configure temperature alarm thresholds to monitor the device temperature. When the device temperature is out of the specified range, the device generates an alarm.


Temperature of a device increases as the ambient temperature rises and the device has been running for a longer time. When device temperature exceeds the specified range, the device service life and performance are reduced. To prevent the device from overheating, set temperature alarm thresholds on the device. When device temperature is beyond the specified range, the device reports an alarm to the NMS to alert the administrator. Then the administrator can take measures to lower or upper the temperature.


  1. (Optional) Run display temperature { all | slot slot-id }

    Device temperature is displayed.

  2. Run system-view

    The system view is displayed.

  3. Run temperature threshold slot { slot-id | all } lower-limit min-temperature upper-limit max-temperature

    The upper and lower temperature alarm thresholds are configured.

    By default, the lower temperature threshold is 0°C, and the upper temperature threshold varies depending on hardware of various models, ranging from 50°C to 70°C.

Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 207925

Downloads: 996

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next