No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Fault Management Implementation

Fault Management Implementation

When receiving alarms and events generated on the device, the fault management module stores them based on the default severities, records the generation time.

After the fault management function is configured, you can:
  • Change the alarm severities on the device and configure filtering rules on the NMS to filter out unnecessary alarms.
  • Enable the alarm reporting delay function to prevent alarms from being reported repeatedly. When the alarm reporting delay period expires, only the last alarm is reported.
  • Enable the event reporting delay function to prevent events from being reported repeatedly. When the event reporting delay period expires, only the last event is reported.
Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 208713

Downloads: 1000

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next