No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Will the Standby Switch Restart If the Master Switch Is Powered Off and Restarts?

Will the Standby Switch Restart If the Master Switch Is Powered Off and Restarts?

Run the display switchover state command to view the stack master/standby status.
<HUAWEI> display switchover state
Slot 1 HA FSM State(master): realtime or routine backup
Slot 2 HA FSM State(slave): receiving realtime or routine data.

When the master status displays realtime or routine backup and the slave status displays receiving realtime or routine data, the standby switch does not restart and automatically becomes the new master switch if the master switch is powered off and restarts. When the master status and slave status display other states, the standby switch also restarts if the master switch is powered off and restarts.

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 207426

Downloads: 993

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next