No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Can I Do If the CPU Usage Is High?

What Can I Do If the CPU Usage Is High?

When a device has a high CPU usage, perform the following operations:
  1. Check whether the CPU usage keeps increasing or increases instantly. If the CPU usage increases instantly, an operation may be performed, for example, the device just starts, information about optical modules is read continuously, and traffic volume increases instantly. This situation does not affect the device operation.
  2. Check which task process causes a high CPU usage and analyze the task.
  3. Check log information and alarm information to determine whether a hardware fault alarm is generated.
  4. Check whether an interface frequently alternates between Up and Down states according to log information and alarm information. If so, check whether the optical module of the interface is faulty or a non-Huawei-certified optical module is used. Additionally, analyze the configuration and traffic volume of the interface.
  5. Check whether network management operations are frequently performed on the device.
  6. Check whether STP flaps or routing protocols flap.
  7. Check whether the network structure changes and whether a loop occurs on the network.
  8. Check whether malicious attacks exist.

For details on how to locate a high CPU usage, see "High CPU Usage" in the Troubleshooting.

Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 208286

Downloads: 998

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next