No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling a Specified Interface from Receiving NTP Packets

Disabling a Specified Interface from Receiving NTP Packets

Context

Disable receipt of NTP packets by interfaces connected to external devices in the following scenarios:
  • When an unreliable clock server exists on the interface. By default, after the NTP function is enabled, all interfaces can receive NTP packets. An unreliable clock source makes NTP clock data inaccurate.
  • When the NTP clock data has been modified by a malicious attack on the interface.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface for receiving NTP packets is specified.

  3. Run ntp-service [ ipv6 ] in-interface disable

    The interface is disabled from receiving NTP packets.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178167

Views: 209144

Downloads: 1003

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next