No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying the Device Serial Number

Displaying the Device Serial Number

Context

Each device has a unique equipment serial number (ESN). When you require technical assistance, you need to provide the device serial number.

Procedure

  • Run the display esn command to view the serial number of a device.

    NOTE:

    The S2750EI, S5700LI, S5700S-LI, and S5720EI do not support this command.

  • Run the display device manufacture-info [ slot slot-id ] command to view manufacturing information about the device, including the serial number and manufacturing date.

FAQ

How Can I View the Serial Number of a Device?

Method 1: Obtain the Equipment Serial Number by Using a Command

Run the display elabel slot slot-id command to view electronic label information. slot-id specifies the slot ID of the device. BarCode specifies the equipment serial number.
<HUAWEI> display elabel slot 0
/$[System Integration Version]  
/$SystemIntegrationVersion=3.0   
      
      
[Slot_0]      
/$[Board Integration Version]  
/$BoardIntegrationVersion=3.0  
    
    
[Main_Board]     
      
/$[ArchivesInfo Version]      
/$ArchivesInfoVersion=3.0       
                 
           
[Board Properties]   
BoardType=CX22EFGEA      
BarCode=2102351820109C000451 
Item=02351820 
......
NOTE:

You can run the display device manufacture-info command to check the serial number obtained from the electronic label. Only V200R003 and later versions support this command.

Method 2: Obtain the Equipment Serial Number Through the Web System

When the web system is enabled on a device, view the equipment serial number through the web system.

EasyOperation web system (supported only in V200R005 and later versions)

Log in to a device through the web system and click Monitor on the toolbar to view device information, including the equipment serial number, as shown in Figure 2-1.

Figure 2-1  System Description

Web system classical version (Not supported in V200R011C10 and later versions)

Log in to a device through the web system and click Device Summary on the toolbar to view board information, including the equipment serial number, as shown in Figure 2-2.

Figure 2-2  Board information

Method 3: Obtain the Equipment Serial Number by Viewing the Serial Number Label

  • S1720/S2700-26TP-EI-AC/S2700-26TP-SI-AC/S2700-26TP-EI-DC/S2700-52P-EI-AC/S2710-52P-SI-AC/S2710-52P-PWR-SI/S2700-52P-PWR-EI/S2700-26TP-PWR-EI/S2720EI/S2750EI/S3700-EI/S3700-SI/S5700-LI/S5700S-LI/S5720-LI (except S5720-16X-PWH-LI-AC) /S5720S-LI/S5700-24TP-SI-AC/S5700-24TP-SI-DC/S5700-48TP-SI-AC/S5700-48TP-SI-DC/S5700-26X-SI-12S-AC/S5700-HI/S5710-28X-LI-AC/S5710-52X-LI-AC/S5720-X-EI/S5720-P-EI/S5720S-SI/S5721-SI/S5720-28X-SI-24S-DC/S5720-28X-SI-24S-AC/S6720S-EI/S6720LI/S6720S-LI

    The equipment serial number label is attached to the rear side of the device.



    NOTE:
    The serial number label has a total of 20 characters, for example, 210235383610C3000006. The serial number shown in the figure is only used as an example. The serial number label location on the rear side of a device varies according to the device model.
  • S2700-9TP-SI-AC/S2700-9TP-EI-AC/S2700-9TP-EI-DC/S2700-18TP-EI-AC/S2700-18TP-SI-AC/S2700-9TP-PWR-EI/S5700-28C-SI/S5700-24TP-PWR-SI/S5700-28C-PWR-SI/S5700-28C-EI/S5700-28C-EI-24S/S5700-28C-PWR-EI/S5710-28C-LI/S5710-28C-PWR-LI/S5720-16X-PWH-LI-AC

    The equipment serial number label is attached to the front side of the device.



  • S5700-48TP-PWR-SI/S5700-52C-PWR-SI/S5700-52C-SI/S5700-52C-EI/S5700-52C-PWR-EI/S5710-52C-LI/S5710-52C-PWR-LI/S6700-EI

    The equipment serial number label is attached to the upper left corner near to the interface side.



  • S5710-EI

    There is a removable equipment serial number label in the middle of the rear side of the device.



  • S5710-HI

    There is a removable equipment serial number label in the middle of the left part on the rear side of the device.



  • S5720-HI/S5720-C-EI/S5720-PC-EI/S5720-SI (except S5720-28X-SI-24S-DC and S5720-28X-SI-24S-AC) /S5730SI/S5730S-EI/S6720-EI/S6720SI/S6720S-SI

    There is a removable equipment serial number label at the lower left of the rear panel.



How Can I View the Serial Number of an Optical Module?

Method 1: Run the display Command to View the Serial Number

  • Run the display elabel command to view the electronic label of an optical module. BarCode indicates the serial number of the optical module.
    <HUAWEI> display elabel
    ......
    [Port_XGigabitEthernet0/0/1]
    /$[ArchivesInfo Version]
    /$ArchivesInfoVersion=3.0
    
    
    [Board Properties]
    BoardType=D09181-1A
    BarCode=D132500133
    Item=
    Description=10Gbps-256nm-Copper Pigtail-3(copper)
    Manufactured=2013-09-07
    /$VendorName=TIME
    IssueNumber=
    CLEICode=
    BOM=
    ......
  • Run the display transceiver interface interface-type interface-number command to view information about a specified optical module. Manu. Serial Number indicates the serial number of the optical module.
    <HUAWEI> display transceiver interface gigabitethernet 0/0/49
    
    GigabitEthernet0/0/49 transceiver information:
    -------------------------------------------------------------
    Common information:                                                             
      Transceiver Type               :1000_BASE_SX_SFP                              
      Connector Type                 :LC                                            
      Wavelength(nm)                 :850                                           
      Transfer Distance(m)           :0(9um),300(50um),150(62.5um)                  
      Digital Diagnostic Monitoring  :YES                                           
      Vendor Name                    :HUAWEI                              
      Vendor Part Number             :02318169 
      Ordering Name                  :                                              
    -------------------------------------------------------------                   
    Manufacture information:                                                        
    Manu. Serial Number        :CD25HP12M
     Manufacturing Date             :2013-06-184                                    
      Vendor Name                    :HUAWEI         
    -------------------------------------------------------------
    

Method 2: View the Label Attached on an Optical Module to View the Serial Number

You can check the label attached on the optical module to obtain the serial number.

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 206089

Downloads: 989

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next