No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Diagnostic Information

Displaying Diagnostic Information

Context

When the system experiences a fault or during routine maintenance, you can view diagnostic information to collect the running information of all modules.

Diagnostic information is mainly used for fault location. Collecting diagnostic information may affect system performance. For example, it may cause a high CPU usage. Therefore, collecting diagnostic information is not recommended when the system is running normally.

Procedure

  • Run the display diagnostic-information [ acl | arp | bfd | defend | dhcp | l2adp | l3adp | lbdt | lldp | mcast | mpls | qos | rrpp | sdk | smlk | srm | stack | stat | stp | ucm ] [ file-name ] command to view the device diagnostic information.
Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178167

Views: 209425

Downloads: 1004

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next