No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for NTP

Application Scenarios for NTP

Typical Application

On the network in Figure 6-8, SwitchA is accessing the NTP master clock server to synchronize all clocks within the network. SwitchA is configured as the unicast server, and SwitchB, SwitchC and SwitchD are configured as unicast clients. SwitchE acts as a symmetric peer of both the upstream SwitchB and downstream SwitchF.

Figure 6-8  Typical NTP networking

Application in VPN

Figure 6-9 shows NTP service application. Both CE A and CE B belong to VPN 2. CE B is used as an NTP unicast server, CE A is used as an NTP unicast client, and NTP time synchronization is implementable between CE B and CE A.

Figure 6-9  NTP application in VPN

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 206169

Downloads: 989

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next