No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SVF Management and Maintenance

SVF Management and Maintenance

After an SVF system is set up, access and aggregation devices are virtualized into one logical device. An SVF system is a virtual system, in which the parent configures and manages all member devices. The parent is managed and maintained as a common device. For example, you can log in to the parent through the console port or management port and perform a software upgrade. ASs are managed and maintained using commands on the parent. For example, you can log in to ASs through console ports of ASs, restart ASs, upgrade ASs, load and delete patches for ASs, and replace ASs.

NOTE:

The parent notifies the web NMS of only the alarms reported by the AS service module described in the MBR section in "O&M and Troubleshooting-Alarm Handling".

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 208310

Downloads: 998

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next