No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring PoE

Configuring PoE

Pre-configuration Tasks

Before configuring PoE, complete the following tasks:

  • Install the PoE power module and power on it.
  • Connect the interfaces on the PSE to PDs to ensure that the status of the link layer protocol of the interface is Up.

Generally, the device can detect whether a PD connected to it needs power supply and provides PoE function. If you need to modify the PoE configuration or manually power on the PD, see the following configuration.

Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 207057

Downloads: 993

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next