No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Do Common CPU Processes Such as VIDL, SOCK, and RPCQ Mean?

What Do Common CPU Processes Such as VIDL, SOCK, and RPCQ Mean?

The following table describes common CPU processes.

Process Name

Process Description

VIDL

Idle task. A larger value for this task indicates a lower CPU usage.

SOCK

Packet receiving and processing task. If this task has a high CPU usage, the CPU is receiving and processing a large number of protocol packets. When this occurs, the device may be undergoing an IP packet attack.

RPCQ

Inter-card communication task. The RPCQ and SOCK tasks can be analyzed together. If the device receives a large number of packets and needs to respond to these packets, the RPCQ task has a high CPU usage. A packet attack may occur if this task has a high CPU usage.

bcmRX/mv_rx

Bottom-layer packet receiving task. This task has a high CPU usage when the CPU receives a large number of packets.

AGNT

IPv4 SNMP protocol stack task. This task has a high CPU usage when network management operations are frequently performed.

AGT6

IPv6 SNMP protocol stack task. This task has a high CPU usage when network management operations are frequently performed.

ROUT

Route management task. This task has a high CPU usage when the system is learning a large number of routes or many routes flap. When this occurs, view routing information to determine whether the route management module is faulty.

VPR

Packet receiving task. This task receives the packets transmitted through the inter-card CPU data packet channel.

For more details about CPU processes, see the description of the display cpu-usage [ slave | slot slot-id ] [vcpu vcpu ] command output.

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 206074

Downloads: 989

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next