No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Resource Mode of the Extended Entry Space

Configuring the Resource Mode of the Extended Entry Space

Context

A device maintains many MAC address entries, FIB entries, and ARP entries when processing a large number of services. However, the number of the entries supported by the device is limited. If these entries cannot meet service requirements, the service processing efficiency degrades. A device provides the function that extends entry spaces and allows configuring the resource mode of the extended entry space to extend the MAC address, FIB entry, or ARP entry spaces as required.

NOTE:

Only the S5720EI, S6720EI and S6720S-EI support this configuration.

Procedure

  1. (Optional) Run display resource-mode configuration

    The resource mode configuration of the extended entry space is checked.

  2. Run system-view

    The system view is displayed.

  3. Configure the resource mode of the extended entry space.

    • On the S5720EI, run the assign resource-mode { enhanced-mac | enhanced-ipv4 | enhanced-ipv6 } [ slot slot-id | all ] command to configure the resource mode.
    • On the S6720EI and S6720S-EI, run the assign resource-mode { enhanced-mac | enhanced-arp | enhanced-ipv4 | ipv4-ipv6 6:1 | 96k-arp } [ slot slot-id | all ] command to configure the resource mode.

    By default, the resource allocation mode of the S5720EI is enhanced-mac and that of the S6720EI and S6720S-EI is enhanced-arp.

    Table 3-1  Number of entries supported in different resource allocation modes on the S5720EI
    Resource Allocation Mode MAC IPv4 FIB IPv6 FIB (0-64 Bits Mask) IPv6 FIB (Over 64 Bits Mask) ARP ND Multicast IPv4&IPv6
    enhanced-mac 64K 12K 6K 1K 16K 8K 2000
    enhanced-ipv4 32K 16K 8K 0K 16K 8K 2000
    enhanced-ipv6 32K 8K 4K 2K 16K 8K 2000
    NOTE:

    On the S5720EI, IPv4 FIB and IPv6 FIB (0-64 bits mask) share hardware resources. The specifications listed in the preceding table indicate the maximum number of FIB entries of a single type. Numbers of the two types of FIB entries cannot reach the maximum value simultaneously.

    On the S5720EI, ARP and ND share hardware resources. The value listed in the preceding table indicates the maximum number of entries of a single type. Numbers of the two types of entries cannot reach the maximum value simultaneously.

    Table 3-2  Number of entries supported in different resource allocation modes on the S6720EI and S6720S-EI
    Resource Allocation Mode MAC IPv4 FIB IPv6 FIB (0-64 Bits Mask) IPv6 FIB (Over 64 Bits Mask) ARP ND Multicast IPv4&IPv6
    enhanced-arp 96K 12K 6K 1K 48K 44K 4000
    enhanced-mac 288K 12K 6K 1K 16K 8K 4000
    enhanced-ipv4 32K 128K 80K 0K 16K 8K 4000
    ipv4-ipv6 6:1 32K 64K 10K 10K 16K 8K 4000
    96k-arp 96K 12K 6K 1K 96000 44K 4000
    NOTE:

    On the S6720EI and S6720S-EI, ARP and ND share hardware resources. The value listed in the preceding table indicates the maximum number of entries of a single type. Numbers of the two types of entries cannot reach the maximum value simultaneously.

    When the S6720EI and S6720S-EI work in enhanced-arp, enhanced-mac, enhanced-ipv4, or 96k-arp mode, IPv4 FIB and IPv6 FIB (0-64 bits mask) share hardware resources. The value listed in the preceding table indicates the maximum number of FIB entries of a single type. Numbers of the two types of FIB entries cannot reach the maximum value simultaneously.

    When the S6720EI and S6720S-EI work in ipv4-ipv6 6:1 mode, IPv6 FIB (0-64 bits mask) and IPv6 FIB (over 64 bits mask) share hardware resources. The value listed in the preceding table indicates the maximum number of FIB entries of a single type. Numbers of the two types of FIB entries cannot reach the maximum value simultaneously.

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 208259

Downloads: 998

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next