No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Load a Patch for a Stack?

How Do I Load a Patch for a Stack?

Perform the following operations to load a patch to a stack.
  1. Save the patch file to the root directory of the master switch.
  2. Run the patch load filename all run command to load and run the patch.
  3. After the patch is loaded, run the display patch-information command to view patch information.
Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178167

Views: 207061

Downloads: 993

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next